@@ -1287,6 +1287,18 @@ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
return 0;
}
+static int vhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci does not map for dma\n");
+ return 0;
+}
+
+static void vhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci does not unmap for dma\n");
+}
+
static const struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
@@ -1303,6 +1315,9 @@ static const struct hc_driver vhci_hc_driver = {
.get_frame_number = vhci_get_frame_number,
+ .map_urb_for_dma = vhci_map_urb_for_dma,
+ .unmap_urb_for_dma = vhci_unmap_urb_for_dma,
+
.hub_status_data = vhci_hub_status,
.hub_control = vhci_hub_control,
.bus_suspend = vhci_bus_suspend,
vhci doesn’t do dma for remote device. Actually, the real dma operation is done by network card driver. So, vhci doesn’t use and need dma address of transfer buffer of urb. But hcd provides dma mapping and unmapping function by defualt and it causes unnecessary dma mapping and unmapping which will be done again at the NIC driver and it wastes CPU cycles. So, implement map_urb_for_dma and unmap_urb_for_dma function for vhci in order to skip the dma mapping and unmapping procedure. Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> --- v2 - Rename the subject of the patch - Add unmap_urb_for_dma function according to Alan's comment --- drivers/usb/usbip/vhci_hcd.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)