@@ -50,7 +50,7 @@ void ast_vhub_dev_irq(struct ast_vhub_dev *d)
static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
{
- u32 reg, hmsk;
+ u32 reg, hmsk, i;
if (d->enabled)
return;
@@ -76,6 +76,20 @@ static void ast_vhub_dev_enable(struct ast_vhub_dev *d)
/* Set EP0 DMA buffer address */
writel(d->ep0.buf_dma, d->regs + AST_VHUB_DEV_EP0_DATA);
+ /* Clear stall on all EPs */
+ for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
+ struct ast_vhub_ep *ep = d->epns[i];
+
+ if (ep && (ep->epn.stalled || ep->epn.wedged)) {
+ ep->epn.stalled = false;
+ ep->epn.wedged = false;
+ ast_vhub_update_epn_stall(ep);
+ }
+ }
+
+ /* Additional cleanups */
+ d->wakeup_en = false;
+ d->suspended = false;
d->enabled = true;
}
@@ -477,46 +491,28 @@ void ast_vhub_dev_resume(struct ast_vhub_dev *d)
void ast_vhub_dev_reset(struct ast_vhub_dev *d)
{
- /*
- * If speed is not set, we enable the port. If it is,
- * send reset to the gadget and reset "speed".
- *
- * Speed is an indication that we have got the first
- * setup packet to the device.
- */
- if (d->gadget.speed == USB_SPEED_UNKNOWN && !d->enabled) {
- DDBG(d, "Reset at unknown speed of disabled device, enabling...\n");
- ast_vhub_dev_enable(d);
- d->suspended = false;
+ /* No driver, just disable the device and return */
+ if (!d->driver) {
+ ast_vhub_dev_disable(d);
+ return;
}
- if (d->gadget.speed != USB_SPEED_UNKNOWN && d->driver) {
- unsigned int i;
- DDBG(d, "Reset at known speed of bound device, resetting...\n");
+ /* If the port isn't enabled, just enable it */
+ if (!d->enabled) {
+ DDBG(d, "Reset of disabled device, enabling...\n");
+ ast_vhub_dev_enable(d);
+ } else {
+ DDBG(d, "Reset of enabled device, resetting...\n");
spin_unlock(&d->vhub->lock);
- d->driver->reset(&d->gadget);
+ usb_gadget_udc_reset(&d->gadget, d->driver);
spin_lock(&d->vhub->lock);
/*
- * Disable/re-enable HW, this will clear the address
+ * Disable and maybe re-enable HW, this will clear the address
* and speed setting.
*/
ast_vhub_dev_disable(d);
ast_vhub_dev_enable(d);
-
- /* Clear stall on all EPs */
- for (i = 0; i < AST_VHUB_NUM_GEN_EPs; i++) {
- struct ast_vhub_ep *ep = d->epns[i];
-
- if (ep && ep->epn.stalled) {
- ep->epn.stalled = false;
- ast_vhub_update_epn_stall(ep);
- }
- }
-
- /* Additional cleanups */
- d->wakeup_en = false;
- d->suspended = false;
}
}
We had some dodgy code using the speed setting to decide whether a port reset would reset the device or just enable it. Instead, if the device is disabled and has a gadget attached, a reset will enable it. If it's already enabled, a reset will reset it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- drivers/usb/gadget/udc/aspeed-vhub/dev.c | 58 +++++++++++------------- 1 file changed, 27 insertions(+), 31 deletions(-)