| Message ID | 20190826131058.17393-1-rogerq@ti.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | c09b73cfac2a9317f1104169045c519c6021aa1d |
| Headers | show |
| Series | usb: dwc3: don't set gadget->is_otg flag | expand |
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 173f5329d3d9..48213421e9e9 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3318,7 +3318,6 @@ int dwc3_gadget_init(struct dwc3 *dwc) dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->gadget.sg_supported = true; dwc->gadget.name = "dwc3-gadget"; - dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG; dwc->gadget.lpm_capable = true; /*
This reverts commit 6a4290cc28be1 ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.") We don't yet support any of the OTG mechanisms (HNP/SRP/ADP) and are not setting gadget->otg_caps, so don't set gadget->is_otg flag. If we do then we end up publishing a OTG1.0 descriptor in the gadget descriptor which causes device enumeration to fail if we are connected to a host with CONFIG_USB_OTG enabled. Host side log without this patch [ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port [ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd [ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port [ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.253606] usb usb1-port1: attempt power cycle [ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd [ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd [ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.493532] usb usb1-port1: unable to enumerate USB device Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/dwc3/gadget.c | 1 - 1 file changed, 1 deletion(-)