From patchwork Mon Sep 23 02:24:48 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ji-Ze Hong (Peter Hong)" X-Patchwork-Id: 11155989 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C5A7613BD for ; Mon, 23 Sep 2019 02:25:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 99E9A2133F for ; Mon, 23 Sep 2019 02:25:15 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="vCCaaKEA" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2404150AbfIWCZM (ORCPT ); Sun, 22 Sep 2019 22:25:12 -0400 Received: from mail-pf1-f195.google.com ([209.85.210.195]:37481 "EHLO mail-pf1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2404127AbfIWCZK (ORCPT ); Sun, 22 Sep 2019 22:25:10 -0400 Received: by mail-pf1-f195.google.com with SMTP id y5so8185335pfo.4; Sun, 22 Sep 2019 19:25:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=m2Jm8H+k+T9Y9bpQG3jtDNyGk+0U+Plvy/NdnRGLxT0=; b=vCCaaKEA15fTyVj6g3hsk+I78MOez77YEMhwJbxgTWTrF9nQHRzliKL1sZ8mAQgWpT OWdVsa0T27Ym/ic62FY4O7elCq3EyvFWz1BUXLgX60HxYMizNNgw5cdCweuI1seYPQJS q0KJwe6poBBFPfW6dEFpp+yo0o/2OX3/X7Am//j7YtpPtfjiVsPVxlVWV810OoiYCPMe /RhSBWoiP16BVgjndIvyOB6pj1bb7T5wXcFBrwRhJdK6CnvM4fndo2DJ1QSfgZMtYOEe hOTTCMO0iaKwWZo3KfpdoG/xu6l1px/V4rMLqk2hCV3Qughmitq69c8A0qX59Npt1rUb XNEQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=m2Jm8H+k+T9Y9bpQG3jtDNyGk+0U+Plvy/NdnRGLxT0=; b=PZdw1N/1y1aZ17aejhwOV5Xt+bzhOo8HoXsO2OSjYkWJuk9eO5/qnUlrHWklWyfMuO B1crVt/vnsbNnf2DM0gvc1zasKBAeQ/yzh78E7JeePzsOUOz7orL9KDrcn2RMFGpeS/8 7Qqnf44A1v66wR4C3q4LLZ2OxXsGYhGP+g8QxSllAUfP5SSn4Msa50S2FmmG7cAFYREN 0nJne9fJ4cbBRtN7zFRn6Em8+8PGbtdwue/m669BF1tmzgkeuv+qlvpkxMW8eHdN0jJb TPpC+G1zE1vwdSk9EhfeGNwxdY+bz8AXsP5ZzFJXCtCc/j1zStZYD5plO0SlRGR87580 SJxA== X-Gm-Message-State: APjAAAXezEmsuK5psBwKqRpj2wozLEWwS1Cc0qs6wf8aiaxBozMxX3K/ uucMpriiPFhPJpxY3q2kggo= X-Google-Smtp-Source: APXvYqznEq2X3ueRTvigAoVd36h8hWhaaqpD/3VxLXGmXk4aUOwisrAxoWcM32nXRyNI9fVdZeyZKQ== X-Received: by 2002:a63:3c08:: with SMTP id j8mr26477024pga.72.1569205509548; Sun, 22 Sep 2019 19:25:09 -0700 (PDT) Received: from localhost (59-120-186-245.HINET-IP.hinet.net. [59.120.186.245]) by smtp.gmail.com with ESMTPSA id 20sm9759647pfp.153.2019.09.22.19.25.08 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sun, 22 Sep 2019 19:25:08 -0700 (PDT) From: "Ji-Ze Hong (Peter Hong)" X-Google-Original-From: "Ji-Ze Hong (Peter Hong)" To: johan@kernel.org Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, peter_hong@fintek.com.tw, "Ji-Ze Hong (Peter Hong)" Subject: [PATCH V2 6/7] USB: serial: f81232: Add generator for F81534A Date: Mon, 23 Sep 2019 10:24:48 +0800 Message-Id: <20190923022449.10952-7-hpeter+linux_kernel@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20190923022449.10952-1-hpeter+linux_kernel@gmail.com> References: <20190923022449.10952-1-hpeter+linux_kernel@gmail.com> Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The Fintek F81534A series is contains 1 HUB / 1 GPIO device / n UARTs, but the UART is default disable and need enabled by GPIO device(2c42/16F8). When F81534A plug to host, we can only see 1 HUB & 1 GPIO device and we need write 0x8fff to GPIO device register F81534A_CMD_ENABLE_PORT(116h) to enable all available serial ports. Signed-off-by: Ji-Ze Hong (Peter Hong) --- drivers/usb/serial/f81232.c | 135 +++++++++++++++++++++++++++++++++++- 1 file changed, 134 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 01cb5a5ea1d2..82cc1e6cff62 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -36,6 +36,9 @@ { USB_DEVICE(0x2c42, 0x1635) }, /* 8 port UART device */ \ { USB_DEVICE(0x2c42, 0x1636) } /* 12 port UART device */ +#define F81534A_CTRL_ID \ + { USB_DEVICE(0x2c42, 0x16f8) } /* Global control device */ + static const struct usb_device_id id_table[] = { F81232_ID, { } /* Terminating entry */ @@ -46,6 +49,11 @@ static const struct usb_device_id f81534a_id_table[] = { { } /* Terminating entry */ }; +static const struct usb_device_id f81534a_ctrl_id_table[] = { + F81534A_CTRL_ID, + { } /* Terminating entry */ +}; + static const struct usb_device_id all_serial_id_table[] = { F81232_ID, F81534A_SERIES_ID, @@ -105,6 +113,8 @@ MODULE_DEVICE_TABLE(usb, all_serial_id_table); #define F81534A_GPIO_MODE1_OUTPUT BIT(1) #define F81534A_GPIO_MODE0_OUTPUT BIT(0) +#define F81534A_CMD_ENABLE_PORT 0x116 + struct f81232_private { struct mutex lock; u8 modem_control; @@ -853,6 +863,95 @@ static void f81232_lsr_worker(struct work_struct *work) dev_warn(&port->dev, "read LSR failed: %d\n", status); } +static int f81534a_ctrl_set_register(struct usb_device *dev, u16 reg, u16 size, + void *val) +{ + int retry = F81534A_ACCESS_REG_RETRY; + int status; + u8 *tmp; + + tmp = kmalloc(size, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + memcpy(tmp, val, size); + + while (retry--) { + status = usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + F81534A_REGISTER_REQUEST, + F81534A_SET_REGISTER, + reg, + 0, + tmp, + size, + USB_CTRL_SET_TIMEOUT); + if (status != size) { + status = usb_translate_errors(status); + if (status == -EIO) + continue; + + status = -EIO; + } else { + status = 0; + } + + break; + } + + if (status) { + dev_err(&dev->dev, "set ctrl reg: %x, failed status: %d\n", reg, + status); + } + + kfree(tmp); + return status; +} + +static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + unsigned char enable[2]; + int status; + + /* enable all available serial ports */ + enable[0] = 0xff; + enable[1] = 0x8f; + + status = f81534a_ctrl_set_register(dev, F81534A_CMD_ENABLE_PORT, + sizeof(enable), enable); + if (status) + dev_warn(&dev->dev, "set CMD_ENABLE_PORT failed: %d\n", status); + + return status; +} + +static int f81534a_ctrl_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int status; + + status = f81534a_ctrl_enable_all_ports(intf); + if (status) + return status; + + dev = usb_get_dev(dev); + return 0; +} + +static void f81534a_ctrl_disconnect(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + + usb_put_dev(dev); +} + +static int f81534a_ctrl_resume(struct usb_interface *intf) +{ + return f81534a_ctrl_enable_all_ports(intf); +} + static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; @@ -980,7 +1079,41 @@ static struct usb_serial_driver * const serial_drivers[] = { NULL, }; -module_usb_serial_driver(serial_drivers, all_serial_id_table); +static struct usb_driver f81534a_ctrl_driver = { + .name = "f81534a_ctrl", + .id_table = f81534a_ctrl_id_table, + .probe = f81534a_ctrl_probe, + .disconnect = f81534a_ctrl_disconnect, + .resume = f81534a_ctrl_resume, +}; + +static int __init f81232_init(void) +{ + int status; + + status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE, + KBUILD_MODNAME); + if (status) + return status; + + status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, + all_serial_id_table); + if (status) { + usb_deregister(&f81534a_ctrl_driver); + return status; + } + + return 0; +} + +static void __exit f81232_exit(void) +{ + usb_serial_deregister_drivers(serial_drivers); + usb_deregister(&f81534a_ctrl_driver); +} + +module_init(f81232_init); +module_exit(f81232_exit); MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver"); MODULE_AUTHOR("Greg Kroah-Hartman ");