| Message ID | 20191024152833.30698-1-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | c1aa81da1c64a090da7cf335595f69fd76f3c0bf |
| Headers | show |
| Series | [trivial] usb: Spelling s/enpoint/endpoint/ | expand |
On 10/24/2019 7:28 PM, Geert Uytterhoeven wrote: > Fix misspellings of "endpoint". > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Minas Harutyunyan <hminas@synopsys.com> > --- > drivers/usb/dwc2/core.h | 2 +- > drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++-- > drivers/usb/gadget/udc/mv_u3d.h | 2 +- > drivers/usb/musb/musb_gadget.c | 2 +- > 4 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h > index d08d070a0fb6f598..968e03b89d04d5d8 100644 > --- a/drivers/usb/dwc2/core.h > +++ b/drivers/usb/dwc2/core.h > @@ -134,7 +134,7 @@ struct dwc2_hsotg_req; > * @target_frame: Targeted frame num to setup next ISOC transfer > * @frame_overrun: Indicates SOF number overrun in DSTS > * > - * This is the driver's state for each registered enpoint, allowing it > + * This is the driver's state for each registered endpoint, allowing it > * to keep track of transactions that need doing. Each endpoint has a > * lock to protect the state, to try and avoid using an overall lock > * for the host controller as much as possible. > diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h > index 2c537a904ee73950..53ca0ff7c2cbd48c 100644 > --- a/drivers/usb/gadget/udc/fsl_qe_udc.h > +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h > @@ -333,8 +333,8 @@ struct qe_udc { > u32 resume_state; /* USB state to resume*/ > u32 usb_state; /* USB current state */ > u32 usb_next_state; /* USB next state */ > - u32 ep0_state; /* Enpoint zero state */ > - u32 ep0_dir; /* Enpoint zero direction: can be > + u32 ep0_state; /* Endpoint zero state */ > + u32 ep0_dir; /* Endpoint zero direction: can be > USB_DIR_IN or USB_DIR_OUT*/ > u32 usb_sof_count; /* SOF count */ > u32 errors; /* USB ERRORs count */ > diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h > index 982625b7197a0d9c..66b84f792f646bb9 100644 > --- a/drivers/usb/gadget/udc/mv_u3d.h > +++ b/drivers/usb/gadget/udc/mv_u3d.h > @@ -138,7 +138,7 @@ struct mv_u3d_op_regs { > u32 doorbell; /* doorbell register */ > }; > > -/* control enpoint enable registers */ > +/* control endpoint enable registers */ > struct epxcr { > u32 epxoutcr0; /* ep out control 0 register */ > u32 epxoutcr1; /* ep out control 1 register */ > diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c > index 2cb31fc0cd601eb4..f62ffaede1abba48 100644 > --- a/drivers/usb/musb/musb_gadget.c > +++ b/drivers/usb/musb/musb_gadget.c > @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) > } > > /* > - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any > + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any > * data but will queue requests. > * > * exported to ep0 code >
On Fri, Oct 25, 2019 at 1:09 PM Geert Uytterhoeven <geert+renesas@glider.be> wrote: > > Fix misspellings of "endpoint". It is amazing that we have the same typo in so many different drivers. :) > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Li Yang <leoyang.li@nxp.com> > --- > drivers/usb/dwc2/core.h | 2 +- > drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++-- > drivers/usb/gadget/udc/mv_u3d.h | 2 +- > drivers/usb/musb/musb_gadget.c | 2 +- > 4 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h > index d08d070a0fb6f598..968e03b89d04d5d8 100644 > --- a/drivers/usb/dwc2/core.h > +++ b/drivers/usb/dwc2/core.h > @@ -134,7 +134,7 @@ struct dwc2_hsotg_req; > * @target_frame: Targeted frame num to setup next ISOC transfer > * @frame_overrun: Indicates SOF number overrun in DSTS > * > - * This is the driver's state for each registered enpoint, allowing it > + * This is the driver's state for each registered endpoint, allowing it > * to keep track of transactions that need doing. Each endpoint has a > * lock to protect the state, to try and avoid using an overall lock > * for the host controller as much as possible. > diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h > index 2c537a904ee73950..53ca0ff7c2cbd48c 100644 > --- a/drivers/usb/gadget/udc/fsl_qe_udc.h > +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h > @@ -333,8 +333,8 @@ struct qe_udc { > u32 resume_state; /* USB state to resume*/ > u32 usb_state; /* USB current state */ > u32 usb_next_state; /* USB next state */ > - u32 ep0_state; /* Enpoint zero state */ > - u32 ep0_dir; /* Enpoint zero direction: can be > + u32 ep0_state; /* Endpoint zero state */ > + u32 ep0_dir; /* Endpoint zero direction: can be > USB_DIR_IN or USB_DIR_OUT*/ > u32 usb_sof_count; /* SOF count */ > u32 errors; /* USB ERRORs count */ > diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h > index 982625b7197a0d9c..66b84f792f646bb9 100644 > --- a/drivers/usb/gadget/udc/mv_u3d.h > +++ b/drivers/usb/gadget/udc/mv_u3d.h > @@ -138,7 +138,7 @@ struct mv_u3d_op_regs { > u32 doorbell; /* doorbell register */ > }; > > -/* control enpoint enable registers */ > +/* control endpoint enable registers */ > struct epxcr { > u32 epxoutcr0; /* ep out control 0 register */ > u32 epxoutcr1; /* ep out control 1 register */ > diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c > index 2cb31fc0cd601eb4..f62ffaede1abba48 100644 > --- a/drivers/usb/musb/musb_gadget.c > +++ b/drivers/usb/musb/musb_gadget.c > @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) > } > > /* > - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any > + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any > * data but will queue requests. > * > * exported to ep0 code > -- > 2.17.1 >
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index d08d070a0fb6f598..968e03b89d04d5d8 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -134,7 +134,7 @@ struct dwc2_hsotg_req; * @target_frame: Targeted frame num to setup next ISOC transfer * @frame_overrun: Indicates SOF number overrun in DSTS * - * This is the driver's state for each registered enpoint, allowing it + * This is the driver's state for each registered endpoint, allowing it * to keep track of transactions that need doing. Each endpoint has a * lock to protect the state, to try and avoid using an overall lock * for the host controller as much as possible. diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h index 2c537a904ee73950..53ca0ff7c2cbd48c 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.h +++ b/drivers/usb/gadget/udc/fsl_qe_udc.h @@ -333,8 +333,8 @@ struct qe_udc { u32 resume_state; /* USB state to resume*/ u32 usb_state; /* USB current state */ u32 usb_next_state; /* USB next state */ - u32 ep0_state; /* Enpoint zero state */ - u32 ep0_dir; /* Enpoint zero direction: can be + u32 ep0_state; /* Endpoint zero state */ + u32 ep0_dir; /* Endpoint zero direction: can be USB_DIR_IN or USB_DIR_OUT*/ u32 usb_sof_count; /* SOF count */ u32 errors; /* USB ERRORs count */ diff --git a/drivers/usb/gadget/udc/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h index 982625b7197a0d9c..66b84f792f646bb9 100644 --- a/drivers/usb/gadget/udc/mv_u3d.h +++ b/drivers/usb/gadget/udc/mv_u3d.h @@ -138,7 +138,7 @@ struct mv_u3d_op_regs { u32 doorbell; /* doorbell register */ }; -/* control enpoint enable registers */ +/* control endpoint enable registers */ struct epxcr { u32 epxoutcr0; /* ep out control 0 register */ u32 epxoutcr1; /* ep out control 1 register */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 2cb31fc0cd601eb4..f62ffaede1abba48 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1315,7 +1315,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) } /* - * Set or clear the halt bit of an endpoint. A halted enpoint won't tx/rx any + * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any * data but will queue requests. * * exported to ep0 code
Fix misspellings of "endpoint". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/usb/dwc2/core.h | 2 +- drivers/usb/gadget/udc/fsl_qe_udc.h | 4 ++-- drivers/usb/gadget/udc/mv_u3d.h | 2 +- drivers/usb/musb/musb_gadget.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)