| Message ID | 20191030183954.9791-1-jackp@codeaurora.org (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | c724417baf162bd3e035659e22cdf990cfb0d917 |
| Headers | show |
| Series | [v3,1/2] usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus | expand |
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d516e8d6cd7f..e1db94d1fe2e 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -437,12 +437,10 @@ static u8 encode_bMaxPower(enum usb_device_speed speed, val = CONFIG_USB_GADGET_VBUS_DRAW; if (!val) return 0; - switch (speed) { - case USB_SPEED_SUPER: - return DIV_ROUND_UP(val, 8); - default: + if (speed < USB_SPEED_SUPER) return DIV_ROUND_UP(val, 2); - } + else + return DIV_ROUND_UP(val, 8); } static int config_buf(struct usb_configuration *config,
SuperSpeedPlus peripherals must report their bMaxPower of the configuration descriptor in units of 8mA as per the USB 3.2 specification. The current switch statement in encode_bMaxPower() only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so the latter falls back to USB 2.0 encoding which uses 2mA units. Replace the switch with a simple if/else. Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors") Signed-off-by: Jack Pham <jackp@codeaurora.org> --- drivers/usb/gadget/composite.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)