From patchwork Thu Nov 7 15:31:26 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gregory CLEMENT X-Patchwork-Id: 11233235 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id A0C41139A for ; Thu, 7 Nov 2019 15:35:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7EC0A21882 for ; Thu, 7 Nov 2019 15:35:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2388979AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 Received: from relay11.mail.gandi.net ([217.70.178.231]:60099 "EHLO relay11.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729698AbfKGPev (ORCPT ); Thu, 7 Nov 2019 10:34:51 -0500 Received: from localhost (alyon-657-1-975-54.w92-137.abo.wanadoo.fr [92.137.17.54]) (Authenticated sender: gregory.clement@bootlin.com) by relay11.mail.gandi.net (Postfix) with ESMTPSA id 0296A100007; Thu, 7 Nov 2019 15:34:46 +0000 (UTC) From: Gregory CLEMENT To: Cristian Birsan , Felipe Balbi , Greg Kroah-Hartman , Alan Stern , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Rob Herring , devicetree@vger.kernel.org, Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , linux-arm-kernel@lists.infradead.org, Thomas Petazzoni , Gregory CLEMENT Subject: [PATCH 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point Date: Thu, 7 Nov 2019 16:31:26 +0100 Message-Id: <20191107153128.11038-2-gregory.clement@bootlin.com> X-Mailer: git-send-email 2.24.0.rc1 In-Reply-To: <20191107153128.11038-1-gregory.clement@bootlin.com> References: <20191107153128.11038-1-gregory.clement@bootlin.com> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. This information is already documented by the compatible string. It then possible to just rely on the compatible string and completely remove the full ep configuration done in the device tree as it was already the case for all the other USB device controller. Signed-off-by: Gregory CLEMENT Acked-by: Cristian Birsan --- drivers/usb/gadget/udc/atmel_usba_udc.c | 112 +++++++++++++++--------- drivers/usb/gadget/udc/atmel_usba_udc.h | 12 +++ 2 files changed, 84 insertions(+), 40 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 86ffc8307864..2db833caeb09 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -2040,10 +2040,56 @@ static const struct usba_udc_errata at91sam9g45_errata = { .pulse_bias = at91sam9g45_pulse_bias, }; +static const struct usba_ep_config ep_config_sam9[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ +}; + +static const struct usba_ep_config ep_config_sama5[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ +}; + +static const struct usba_udc_config udc_at91sam9rl_cfg = { + .errata = &at91sam9rl_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_at91sam9g45_cfg = { + .errata = &at91sam9g45_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_sama5d3_cfg = { + .config = ep_config_sama5, + .num_ep = ARRAY_SIZE(ep_config_sama5), +}; + static const struct of_device_id atmel_udc_dt_ids[] = { - { .compatible = "atmel,at91sam9rl-udc", .data = &at91sam9rl_errata }, - { .compatible = "atmel,at91sam9g45-udc", .data = &at91sam9g45_errata }, - { .compatible = "atmel,sama5d3-udc" }, + { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, + { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, + { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, { /* sentinel */ } }; @@ -2052,18 +2098,19 @@ MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, struct usba_udc *udc) { - u32 val; struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct device_node *pp; int i, ret; struct usba_ep *eps, *ep; + const struct usba_udc_config *udc_config; match = of_match_node(atmel_udc_dt_ids, np); if (!match) return ERR_PTR(-EINVAL); - udc->errata = match->data; + udc_config = match->data; + udc->errata = udc_config->errata; udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc"); if (IS_ERR(udc->pmc)) udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc"); @@ -2079,8 +2126,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { pp = NULL; - while ((pp = of_get_next_child(np, pp))) - udc->num_ep++; + udc->num_ep = udc_config->num_ep; udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); @@ -2097,52 +2143,38 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, pp = NULL; i = 0; - while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) { + while (i < udc->num_ep) { + const struct usba_ep_config *ep_cfg = &udc_config->config[i]; + ep = &eps[i]; - ret = of_property_read_u32(pp, "reg", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret); - goto err; - } - ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val; + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; + + /* Only the first EP is 64 bytes */ + if (ep->index == 0) + ep->fifo_size = 64; + else + ep->fifo_size = 1024; - ret = of_property_read_u32(pp, "atmel,fifo-size", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); - goto err; - } if (fifo_mode) { - if (val < udc->fifo_cfg[i].fifo_size) { + if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) dev_warn(&pdev->dev, - "Using max fifo-size value from DT\n"); - ep->fifo_size = val; - } else { + "Using default max fifo-size value\n"); + else ep->fifo_size = udc->fifo_cfg[i].fifo_size; - } - } else { - ep->fifo_size = val; } - ret = of_property_read_u32(pp, "atmel,nb-banks", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); - goto err; - } + ep->nr_banks = ep_cfg->nr_banks; if (fifo_mode) { - if (val < udc->fifo_cfg[i].nr_banks) { + if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) dev_warn(&pdev->dev, - "Using max nb-banks value from DT\n"); - ep->nr_banks = val; - } else { + "Using default max nb-banks value\n"); + else ep->nr_banks = udc->fifo_cfg[i].nr_banks; - } - } else { - ep->nr_banks = val; } - ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); - ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); + ep->can_dma = ep_cfg->can_dma; + ep->can_isoc = ep_cfg->can_isoc; sprintf(ep->name, "ep%d", ep->index); ep->ep.name = ep->name; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index a0225e4543d4..48e332439ed5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -290,6 +290,12 @@ struct usba_ep { #endif }; +struct usba_ep_config { + u8 nr_banks; + unsigned int can_dma:1; + unsigned int can_isoc:1; +}; + struct usba_request { struct usb_request req; struct list_head queue; @@ -307,6 +313,12 @@ struct usba_udc_errata { void (*pulse_bias)(struct usba_udc *udc); }; +struct usba_udc_config { + const struct usba_udc_errata *errata; + const struct usba_ep_config *config; + const int num_ep; +}; + struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock;