| Message ID | 20191228203358.23490-16-digetx@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | NVIDIA Tegra USB2 drivers clean up | expand |
On 19-12-28 23:33:57, Dmitry Osipenko wrote: > Now, when ci_hdrc_tegra kernel module is loaded, the phy_tegra_usb module > is loaded too regardless of kernel's configuration. Previously this > problem was masked because Tegra's EHCI driver is usually enabled in > kernel's config and thus PHY driver was getting loaded because of it, but > now I was making some more thorough testing and noticed that PHY's module > isn't getting auto-loaded without the host driver. > > Note that ChipIdea's driver doesn't use any of the exported functions of > phy_tegra_usb module and thus the module needs to be requested explicitly. > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> > --- > drivers/usb/chipidea/Kconfig | 1 + > drivers/usb/chipidea/ci_hdrc_tegra.c | 6 ++++++ > 2 files changed, 7 insertions(+) > > diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig > index ae850b3fddf2..d53db520e209 100644 > --- a/drivers/usb/chipidea/Kconfig > +++ b/drivers/usb/chipidea/Kconfig > @@ -7,6 +7,7 @@ config USB_CHIPIDEA > select RESET_CONTROLLER > select USB_ULPI_BUS > select USB_ROLE_SWITCH > + select USB_TEGRA_PHY if ARCH_TEGRA > help > Say Y here if your system has a dual role high speed USB > controller based on ChipIdea silicon IP. It supports: > diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c > index 7455df0ede49..8bc11100245d 100644 > --- a/drivers/usb/chipidea/ci_hdrc_tegra.c > +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c > @@ -53,6 +53,12 @@ static int tegra_udc_probe(struct platform_device *pdev) > struct tegra_udc *udc; > int err; > > + if (IS_MODULE(CONFIG_USB_TEGRA_PHY)) { > + err = request_module("phy_tegra_usb"); > + if (err) > + return err; > + } > + > udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); > if (!udc) > return -ENOMEM; > -- > 2.24.0 > Acked-by: Peter Chen <peter.chen@nxp.com>
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index ae850b3fddf2..d53db520e209 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -7,6 +7,7 @@ config USB_CHIPIDEA select RESET_CONTROLLER select USB_ULPI_BUS select USB_ROLE_SWITCH + select USB_TEGRA_PHY if ARCH_TEGRA help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c index 7455df0ede49..8bc11100245d 100644 --- a/drivers/usb/chipidea/ci_hdrc_tegra.c +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c @@ -53,6 +53,12 @@ static int tegra_udc_probe(struct platform_device *pdev) struct tegra_udc *udc; int err; + if (IS_MODULE(CONFIG_USB_TEGRA_PHY)) { + err = request_module("phy_tegra_usb"); + if (err) + return err; + } + udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL); if (!udc) return -ENOMEM;
Now, when ci_hdrc_tegra kernel module is loaded, the phy_tegra_usb module is loaded too regardless of kernel's configuration. Previously this problem was masked because Tegra's EHCI driver is usually enabled in kernel's config and thus PHY driver was getting loaded because of it, but now I was making some more thorough testing and noticed that PHY's module isn't getting auto-loaded without the host driver. Note that ChipIdea's driver doesn't use any of the exported functions of phy_tegra_usb module and thus the module needs to be requested explicitly. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/ci_hdrc_tegra.c | 6 ++++++ 2 files changed, 7 insertions(+)