@@ -57,7 +57,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
- ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
+ ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen);
if (ret)
return ret;
@@ -21,8 +21,7 @@
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "phy-generic.h"
@@ -204,8 +203,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
return 0;
}
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
- struct usb_phy_generic_platform_data *pdata)
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err = 0;
@@ -221,28 +219,15 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
needs_vcc = of_property_read_bool(node, "vcc-supply");
needs_clk = of_property_read_bool(node, "clocks");
- nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
- if (!err) {
- nop->gpiod_vbus = devm_gpiod_get_optional(dev,
- "vbus-detect",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
- }
- } else if (pdata) {
- type = pdata->type;
- clk_rate = pdata->clk_rate;
- needs_vcc = pdata->needs_vcc;
- if (gpio_is_valid(pdata->gpio_reset)) {
- err = devm_gpio_request_one(dev, pdata->gpio_reset,
- GPIOF_ACTIVE_LOW,
- dev_name(dev));
- if (!err)
- nop->gpiod_reset =
- gpio_to_desc(pdata->gpio_reset);
- }
- nop->gpiod_vbus = pdata->gpiod_vbus;
+ }
+ nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_ASIS);
+ err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+ if (!err) {
+ nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+ "vbus-detect",
+ GPIOD_ASIS);
+ err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
}
if (err == -EPROBE_DEFER)
@@ -308,7 +293,7 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
if (!nop)
return -ENOMEM;
- err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
+ err = usb_phy_gen_create_phy(dev, nop);
if (err)
return err;
if (nop->gpiod_vbus) {
@@ -22,7 +22,6 @@ struct usb_phy_generic {
int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
- struct usb_phy_generic_platform_data *pdata);
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop);
#endif
@@ -76,7 +76,7 @@ static int keystone_usbphy_probe(struct platform_device *pdev)
if (IS_ERR(k_phy->phy_ctrl))
return PTR_ERR(k_phy->phy_ctrl);
- ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL);
+ ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen);
if (ret)
return ret;
@@ -3,18 +3,6 @@
#define __LINUX_USB_NOP_XCEIV_H
#include <linux/usb/otg.h>
-#include <linux/gpio/consumer.h>
-
-struct usb_phy_generic_platform_data {
- enum usb_phy_type type;
- unsigned long clk_rate;
-
- /* if set fails with -EPROBE_DEFER if can't get regulator */
- unsigned int needs_vcc:1;
- unsigned int needs_reset:1; /* deprecated */
- int gpio_reset;
- struct gpio_desc *gpiod_vbus;
-};
#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
/* sometimes transceivers are accessed only through e.g. ULPI */
The last user of the phy generic platform data was deleted in commit 1e041b6f313aaa966612a7e415cfc09c90d6b829 ("usb: dwc3: exynos: Remove dead code"). So get rid of the platform data, which rids us of another consumer of the legacy GPIO API at the same time. Make sure we only inlcude <linux/gpio/consumer.h> which is all we use. Alter the usb_phy_gen_create_phy() function prototype to not pass any platform data as this is just hardcoded to NULL at all locations calling it in the kernel. Move the devm_gpiod_get* calls out of the if (of_node) parenthesis, as these calls are generic and do not depend on device tree, they are used by any hardware description. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/usb/phy/phy-am335x.c | 2 +- drivers/usb/phy/phy-generic.c | 39 +++++++++-------------------- drivers/usb/phy/phy-generic.h | 3 +-- drivers/usb/phy/phy-keystone.c | 2 +- include/linux/usb/usb_phy_generic.h | 12 --------- 5 files changed, 15 insertions(+), 43 deletions(-)