deleted file mode 100644
@@ -1,64 +0,0 @@
-Platform DesignWare HS OTG USB 2.0 controller
------------------------------------------------------
-
-Required properties:
-- compatible : One of:
- - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
- - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
- - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
- - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
- - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
- - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
- - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- - "amlogic,meson-g12a-usb": The DWC2 USB controller instance in Amlogic G12A SoCs;
- - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- - snps,dwc2: A generic DWC2 USB controller with default parameters.
- - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
- configured in FS mode;
- - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
- configured in HS mode;
- - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
- configured in HS mode;
-- reg : Should contain 1 register range (address and length)
-- interrupts : Should contain 1 interrupt
-- clocks: clock provider specifier
-- clock-names: shall be "otg"
-Refer to clk/clock-bindings.txt for generic clock consumer properties
-
-Optional properties:
-- phys: phy provider specifier
-- phy-names: shall be "usb2-phy"
-- vbus-supply: reference to the VBUS regulator. Depending on the current mode
- this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
- regulator is updated if the controller is configured in "otg" mode and the
- status changes between "host" and "peripheral".
-Refer to phy/phy-bindings.txt for generic phy consumer properties
-- dr_mode: shall be one of "host", "peripheral" and "otg"
- Refer to usb/generic.txt
-- g-rx-fifo-size: size of rx fifo size in gadget mode.
-- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
-- snps,need-phy-for-wake: If present indicates that the phy needs to be left
- on for remote wakeup during suspend.
-- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
- we detect a wakeup. This is due to a hardware errata.
-
-Deprecated properties:
-- g-use-dma: gadget DMA mode is automatically detected
-
-Example:
-
- usb@101c0000 {
- compatible = "ralink,rt3050-usb, snps,dwc2";
- reg = <0x101c0000 40000>;
- interrupts = <18>;
- clocks = <&usb_otg_ahb_clk>;
- clock-names = "otg";
- phys = <&usbphy>;
- phy-names = "usb2-phy";
- snps,need-phy-for-wake;
- };
new file mode 100644
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare HS OTG USB 2.0 controller Bindings
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: brcm,bcm2835-usb
+ - const: hisilicon,hi6220-usb
+ - items:
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,px30-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,rk3036-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,rv1108-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,rk3188-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,rk3228-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - items:
+ - const: rockchip,rk3288-usb
+ - const: rockchip,rk3066-usb
+ - const: snps,dwc2
+ - const: lantiq,arx100-usb
+ - const: lantiq,xrx200-usb
+ - items:
+ - const: amlogic,meson8-usb
+ - const: snps,dwc2
+ - items:
+ - const: amlogic,meson8b-usb
+ - const: snps,dwc2
+ - const: amlogic,meson-gxbb-usb
+ - items:
+ - const: amlogic,meson-g12a-usb
+ - const: snps,dwc2
+ - const: amcc,dwc-otg
+ - const: snps,dwc2
+ - const: st,stm32f4x9-fsotg
+ - const: st,stm32f4x9-hsotg
+ - const: st,stm32f7-hsotg
+ - const: samsung,s3c6400-hsotg
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: otg
+
+ resets:
+ items:
+ - description: common reset
+ - description: ecc reset
+ minItems: 1
+
+ reset-names:
+ items:
+ - const: dwc2
+ - const: dwc2-ecc
+ minItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb2-phy
+
+ vbus-supply:
+ description: reference to the VBUS regulator. Depending on the current mode
+ this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
+ regulator is updated if the controller is configured in "otg" mode and the
+ status changes between "host" and "peripheral".
+
+ vusb_d-supply:
+ description: phandle to voltage regulator of digital section,
+
+ vusb_a-supply:
+ description: phandle to voltage regulator of analog section.
+
+ dr_mode:
+ enum: [host, peripheral, otg]
+
+ g-rx-fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: size of rx fifo size in gadget mode.
+
+ g-np-tx-fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: size of non-periodic tx fifo size in gadget mode.
+
+ g-tx-fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+
+ snps,need-phy-for-wake:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: If present indicates that the phy needs to be left on for remote wakeup during suspend.
+
+ snps,reset-phy-on-wake:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: If present indicates that we need to reset the PHY when we detect a wakeup.
+ This is due to a hardware errata.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ usb@101c0000 {
+ compatible = "rockchip,rk3066-usb", "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <18>;
+ clocks = <&usb_otg_ahb_clk>;
+ clock-names = "otg";
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ };
+
+...
Convert DWC2 bindings to DT schema format using json-schema. DWC2 is widely use but a couple of compatibles and properties (vusb_d-supply,vusb_a-supply) were missing in dwc2.txt, the patch add them. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> --- CC: Minas Harutyunyan <hminas@synopsys.com> CC: Krzysztof Kozlowski <krzk@kernel.org> changes in version 3: - put Rob Herring as maintainer - change the example to use one of the listed compatible changes in version 2: - put Minas Harutyunyan <hminas@synopsys.com> as maintainer - remove type and description from phy property - remove description from compatible items - simplify samsung,s3c6400-hsotg compatible handling Documentation/devicetree/bindings/usb/dwc2.txt | 64 ---------- Documentation/devicetree/bindings/usb/dwc2.yaml | 151 ++++++++++++++++++++++++ 2 files changed, 151 insertions(+), 64 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/dwc2.txt create mode 100644 Documentation/devicetree/bindings/usb/dwc2.yaml