diff mbox series

[09/25] usb: musb: omap2430: Idle musb on init

Message ID 20200115132547.364-10-b-liu@ti.com (mailing list archive)
State Mainlined
Commit 8b359cbc3cdeb6145ca096334509df2a49ebaa0e
Headers show
Series musb patches for v5.6-rc1 | expand

Commit Message

Bin Liu Jan. 15, 2020, 1:25 p.m. UTC 
From: Tony Lindgren <tony@atomide.com>

We want to configure musb state in omap2430_musb_enable() instead of
omap2430_musb_init(). Otherwise musb may not idle properly until
USB cable has been connected at least once.

And we already have omap_musb_set_mailbox() configure mode with
omap_control_usb_set_mode() so we can remove those calls from
omap2430_musb_enable().

Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
---
 drivers/usb/musb/omap2430.c | 20 +++-----------------
 1 file changed, 3 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2cc54135bb8b..bc5810e14ebb 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -212,7 +212,6 @@  static int omap2430_musb_init(struct musb *musb)
 	u32 l;
 	int status = 0;
 	struct device *dev = musb->controller;
-	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
 	struct omap_musb_board_data *data = plat->board_data;
 
@@ -268,9 +267,6 @@  static int omap2430_musb_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	if (glue->status != MUSB_UNKNOWN)
-		omap_musb_set_mailbox(glue);
-
 	return 0;
 }
 
@@ -279,19 +275,9 @@  static void omap2430_musb_enable(struct musb *musb)
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	switch (glue->status) {
-
-	case MUSB_ID_GROUND:
-		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
-		break;
-
-	case MUSB_VBUS_VALID:
-		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
-		break;
-
-	default:
-		break;
-	}
+	if (glue->status == MUSB_UNKNOWN)
+		glue->status = MUSB_VBUS_OFF;
+	omap_musb_set_mailbox(glue);
 }
 
 static void omap2430_musb_disable(struct musb *musb)