From patchwork Mon Jan 20 16:31:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 11342565 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id BF7D26C1 for ; Mon, 20 Jan 2020 16:32:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 89B3122464 for ; Mon, 20 Jan 2020 16:32:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="zJaL5XME" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729380AbgATQcc (ORCPT ); Mon, 20 Jan 2020 11:32:32 -0500 Received: from mail-wr1-f65.google.com ([209.85.221.65]:36837 "EHLO mail-wr1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729377AbgATQaz (ORCPT ); Mon, 20 Jan 2020 11:30:55 -0500 Received: by mail-wr1-f65.google.com with SMTP id z3so116443wru.3 for ; Mon, 20 Jan 2020 08:30:54 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=y15m04gvntz7WNCQA03ONSTkoLY+O6LkN7qRvt1gs5Y=; b=zJaL5XMEaV6uQhlMlRA3A0iar6FOYjw+Skv4hEwkB88ValBM9/FzzgZAgw9AYhIpqc a4ok0zAA5N6LmpNz4AO0qjfD8SZnMBlzK9f/3vwwV8bZ4voAAvIGke0CrAYIkJW7W65T Iepcj04HzLU9QOeceXOPPvPlk6ZIJMWKSAi+DWLC8RgN63mQv0bt5nh9ZrspG0AGxNRK VuX1x30HimKFe+6DED/4c6fFUIPeD9w1gDiL3JfZ1IY8L0JTmK+robKwfgQI6L8O6ZRK upiJijAHQHnzA6rgW3l9y1ROwWfB4MJWgqU0YbOjIrd8FWd7YhmcLIspCfVUx/FQVhFI LUxQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=y15m04gvntz7WNCQA03ONSTkoLY+O6LkN7qRvt1gs5Y=; b=XUe3/nRHPoXaGwEZauuYUvMB+MpiHKGSCrq6uuyoFIJRSTxBRyzqt9BPkPVIBnLtjx BEdeyK7+DQIQ6Txo8iiC+48Gvy+lzIoO93zKjpwTiFkhUzXDDNYv0tg+ONbsMiQT1JYm MmudTmiWtTRV3QhWGbfO1iVDc69pcsqBZx2NHKOVOYSI53YpSLLYS3GJuG3G4SC1qG+g ue1xY8EkkvS07HVZVAutYkqF1jeZ0+FJj6oxUlR1W//mDtPv5LP1RQU7gpGDtEEdnNfx lDQTeAPv03+sXLqO3Z1AytCj+HYA5tx0el4muCrSA6mKdKJ4HI8TZ2kRYKnneG680z74 0jvA== X-Gm-Message-State: APjAAAVwF1qLhfaWbcHb7D7Q9JFcpGx/3QIvWqaa4IQFjg+kSdKADiKk Z0HC3Q5C05Y4KO/PX800aXVGCw== X-Google-Smtp-Source: APXvYqy9XA0lZosI0z+/zhQawgTEsM44oKKMow/uFb3cSL+p/BI7NUyedHHCjjHecXhP0qt71nPkkA== X-Received: by 2002:adf:cd92:: with SMTP id q18mr288819wrj.261.1579537853350; Mon, 20 Jan 2020 08:30:53 -0800 (PST) Received: from localhost.localdomain ([176.61.57.127]) by smtp.gmail.com with ESMTPSA id p26sm22631756wmc.24.2020.01.20.08.30.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 20 Jan 2020 08:30:52 -0800 (PST) From: Bryan O'Donoghue To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, gregkh@linuxfoundation.org, jackp@codeaurora.org, balbi@kernel.org, bjorn.andersson@linaro.org Cc: linux-kernel@vger.kernel.org, Jorge Ramirez-Ortiz , Jorge Ramirez-Ortiz , Sriharsha Allenki's , Andy Gross , Kishon Vijay Abraham I , Philipp Zabel , Bryan O'Donoghue Subject: [PATCH v2 05/19] phy: qualcomm: usb: Add SuperSpeed PHY driver Date: Mon, 20 Jan 2020 16:31:02 +0000 Message-Id: <20200120163116.1197682-6-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200120163116.1197682-1-bryan.odonoghue@linaro.org> References: <20200120163116.1197682-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org From: Jorge Ramirez-Ortiz Controls Qualcomm's SS phy 1.0.0 implemented in the QCS404 and some other Qualcomm platforms. Based on Sriharsha Allenki's original code. [bod: Removed dependency on extcon. Switched to gpio-usb-conn to handle VBUS On/Off Switched to usb-role-switch to bind gpio-usb-conn to DWC3] Signed-off-by: Jorge Ramirez-Ortiz Cc: Jorge Ramirez-Ortiz Cc: Sriharsha Allenki's Cc: Andy Gross Cc: Bjorn Andersson Cc: Kishon Vijay Abraham I Cc: Philipp Zabel Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bryan O'Donoghue --- drivers/phy/qualcomm/Kconfig | 11 ++ drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-usb-ss.c | 246 +++++++++++++++++++++++++ 3 files changed, 258 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-ss.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index cc3f2bb01ad1..d95602ec6515 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -101,3 +101,14 @@ config PHY_QCOM_QCS404_USB_HS Enable this to support the Qualcomm QCS404 USB Hi-Speed PHY driver. This driver supports the Hi-Speed PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. + +config PHY_QCOM_USB_SS + tristate "Qualcomm USB SS PHY driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in + select GENERIC_PHY + help + Enable this to support the Super-Speed USB transceiver on Qualcomm + chips. This driver supports the PHY which uses the QSCRATCH-based + register set for its control sequences, normally paired with newer + DWC3-based Super-Speed controllers on Qualcomm SoCs. diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index a4a3b21240fa..e8c7137cdbed 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_QCS404_USB_HS) += phy-qcom-qcs404-usb-hs.o +obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c new file mode 100644 index 000000000000..bc4951ddcc09 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2014,2017 The Linux Foundation. All rights reserved. + * Copyright (c) 2018-2020, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PHY_CTRL0 0x6C +#define PHY_CTRL1 0x70 +#define PHY_CTRL2 0x74 +#define PHY_CTRL4 0x7C + +/* PHY_CTRL bits */ +#define REF_PHY_EN BIT(0) +#define LANE0_PWR_ON BIT(2) +#define SWI_PCS_CLK_SEL BIT(4) +#define TST_PWR_DOWN BIT(4) +#define PHY_RESET BIT(7) + +#define NUM_BULK_CLKS 3 +#define NUM_BULK_REGS 2 + +struct ssphy_priv { + void __iomem *base; + struct device *dev; + struct reset_control *reset_com; + struct reset_control *reset_phy; + struct regulator_bulk_data regs[NUM_BULK_REGS]; + struct clk_bulk_data clks[NUM_BULK_CLKS]; + enum phy_mode mode; +}; + +static inline void qcom_ssphy_updatel(void __iomem *addr, u32 mask, u32 val) +{ + writel((readl(addr) & ~mask) | val, addr); +} + +static int qcom_ssphy_do_reset(struct ssphy_priv *priv) +{ + int ret; + + if (!priv->reset_com) { + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, + PHY_RESET); + usleep_range(10, 20); + qcom_ssphy_updatel(priv->base + PHY_CTRL1, PHY_RESET, 0); + } else { + ret = reset_control_assert(priv->reset_com); + if (ret) { + dev_err(priv->dev, "Failed to assert reset com\n"); + return ret; + } + + ret = reset_control_assert(priv->reset_phy); + if (ret) { + dev_err(priv->dev, "Failed to assert reset phy\n"); + return ret; + } + + usleep_range(10, 20); + + ret = reset_control_deassert(priv->reset_com); + if (ret) { + dev_err(priv->dev, "Failed to deassert reset com\n"); + return ret; + } + + ret = reset_control_deassert(priv->reset_phy); + if (ret) { + dev_err(priv->dev, "Failed to deassert reset phy\n"); + return ret; + } + } + + return 0; +} + +static int qcom_ssphy_power_on(struct phy *phy) +{ + struct ssphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = regulator_bulk_enable(NUM_BULK_REGS, priv->regs); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(NUM_BULK_CLKS, priv->clks); + if (ret) + goto err_disable_regulator; + + ret = qcom_ssphy_do_reset(priv); + if (ret) + goto err_disable_clock; + + writeb(SWI_PCS_CLK_SEL, priv->base + PHY_CTRL0); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, LANE0_PWR_ON); + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, REF_PHY_EN); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, 0); + + return 0; +err_disable_clock: + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks); +err_disable_regulator: + regulator_bulk_disable(NUM_BULK_REGS, priv->regs); + + return ret; +} + +static int qcom_ssphy_power_off(struct phy *phy) +{ + struct ssphy_priv *priv = phy_get_drvdata(phy); + + qcom_ssphy_updatel(priv->base + PHY_CTRL4, LANE0_PWR_ON, 0); + qcom_ssphy_updatel(priv->base + PHY_CTRL2, REF_PHY_EN, 0); + qcom_ssphy_updatel(priv->base + PHY_CTRL4, TST_PWR_DOWN, TST_PWR_DOWN); + + clk_bulk_disable_unprepare(NUM_BULK_CLKS, priv->clks); + regulator_bulk_disable(NUM_BULK_REGS, priv->regs); + + return 0; +} + +static int qcom_ssphy_init_clock(struct ssphy_priv *priv) +{ + priv->clks[0].id = "ref"; + priv->clks[1].id = "phy"; + priv->clks[2].id = "pipe"; + + return devm_clk_bulk_get(priv->dev, NUM_BULK_CLKS, priv->clks); +} + +static int qcom_ssphy_init_regulator(struct ssphy_priv *priv) +{ + int ret; + + priv->regs[0].supply = "vdd"; + priv->regs[1].supply = "vdda1p8"; + ret = devm_regulator_bulk_get(priv->dev, NUM_BULK_REGS, priv->regs); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(priv->dev, "Failed to get regulators\n"); + return ret; + } + + return ret; +} + +static int qcom_ssphy_init_reset(struct ssphy_priv *priv) +{ + priv->reset_com = devm_reset_control_get_optional_exclusive(priv->dev, "com"); + if (IS_ERR(priv->reset_com)) { + dev_err(priv->dev, "Failed to get reset control com\n"); + return PTR_ERR(priv->reset_com); + } + + if (priv->reset_com) { + /* if reset_com is present, reset_phy is no longer optional */ + priv->reset_phy = devm_reset_control_get_exclusive(priv->dev, "phy"); + if (IS_ERR(priv->reset_phy)) { + dev_err(priv->dev, "Failed to get reset control phy\n"); + return PTR_ERR(priv->reset_phy); + } + } + + return 0; +} + +static const struct phy_ops qcom_ssphy_ops = { + .power_off = qcom_ssphy_power_off, + .power_on = qcom_ssphy_power_on, + .owner = THIS_MODULE, +}; + +static int qcom_ssphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *provider; + struct ssphy_priv *priv; + struct phy *phy; + int ret; + + priv = devm_kzalloc(dev, sizeof(struct ssphy_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->mode = PHY_MODE_INVALID; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + ret = qcom_ssphy_init_clock(priv); + if (ret) + return ret; + + ret = qcom_ssphy_init_reset(priv); + if (ret) + return ret; + + ret = qcom_ssphy_init_regulator(priv); + if (ret) + return ret; + + phy = devm_phy_create(dev, dev->of_node, &qcom_ssphy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create the SS phy\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, priv); + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct of_device_id qcom_ssphy_match[] = { + { .compatible = "qcom,usb-ssphy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_ssphy_match); + +static struct platform_driver qcom_ssphy_driver = { + .probe = qcom_ssphy_probe, + .driver = { + .name = "qcom-usb-ssphy", + .of_match_table = qcom_ssphy_match, + }, +}; +module_platform_driver(qcom_ssphy_driver); + +MODULE_DESCRIPTION("Qualcomm SuperSpeed USB PHY driver"); +MODULE_LICENSE("GPL v2");