diff mbox series

usb: dwc3: debug: fix string position formatting mixup with ret and len

Message ID 20200210095139.328711-1-colin.king@canonical.com (mailing list archive)
State Mainlined
Commit 42cd5ffe46c1037d5d9a253c72e71a024a7bfbef
Headers show
Series usb: dwc3: debug: fix string position formatting mixup with ret and len | expand

Commit Message

Colin King Feb. 10, 2020, 9:51 a.m. UTC
From: Colin Ian King <colin.king@canonical.com>

Currently the string formatting is mixing up the offset of ret and
len. Re-work the code to use just len, remove ret and use scnprintf
instead of snprintf and len position accumulation where required.
Remove the -ve return check since scnprintf never returns a failure
-ve size. Also break overly long lines to clean up checkpatch
warnings.

Addresses-Coverity: ("Unused value")
Fixes: 1381a5113caf ("usb: dwc3: debug: purge usage of strcat")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
V2: rework original fix, remove strlens and use scnprintf as helpfully
    suggested by Dan Carpenter. Change the subject line to match the
    changes to the V2 of the fix.
---
 drivers/usb/dwc3/debug.h | 39 +++++++++++++++------------------------
 1 file changed, 15 insertions(+), 24 deletions(-)

Comments

Dan Carpenter Feb. 10, 2020, 2:31 p.m. UTC | #1
Looks good!

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>

regards,
dan carpenter
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index e56beb9d1e36..4a13ceaf4093 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -256,86 +256,77 @@  static inline const char *dwc3_ep_event_string(char *str, size_t size,
 	u8 epnum = event->endpoint_number;
 	size_t len;
 	int status;
-	int ret;
 
-	ret = snprintf(str, size, "ep%d%s: ", epnum >> 1,
+	len = scnprintf(str, size, "ep%d%s: ", epnum >> 1,
 			(epnum & 1) ? "in" : "out");
-	if (ret < 0)
-		return "UNKNOWN";
 
 	status = event->status;
 
 	switch (event->endpoint_event) {
 	case DWC3_DEPEVT_XFERCOMPLETE:
-		len = strlen(str);
-		snprintf(str + len, size - len, "Transfer Complete (%c%c%c)",
+		len += scnprintf(str + len, size - len,
+				"Transfer Complete (%c%c%c)",
 				status & DEPEVT_STATUS_SHORT ? 'S' : 's',
 				status & DEPEVT_STATUS_IOC ? 'I' : 'i',
 				status & DEPEVT_STATUS_LST ? 'L' : 'l');
 
-		len = strlen(str);
-
 		if (epnum <= 1)
-			snprintf(str + len, size - len, " [%s]",
+			scnprintf(str + len, size - len, " [%s]",
 					dwc3_ep0_state_string(ep0state));
 		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
-		len = strlen(str);
-
-		snprintf(str + len, size - len, "Transfer In Progress [%d] (%c%c%c)",
+		scnprintf(str + len, size - len,
+				"Transfer In Progress [%d] (%c%c%c)",
 				event->parameters,
 				status & DEPEVT_STATUS_SHORT ? 'S' : 's',
 				status & DEPEVT_STATUS_IOC ? 'I' : 'i',
 				status & DEPEVT_STATUS_LST ? 'M' : 'm');
 		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
-		len = strlen(str);
-
-		snprintf(str + len, size - len, "Transfer Not Ready [%d]%s",
+		len += scnprintf(str + len, size - len,
+				"Transfer Not Ready [%d]%s",
 				event->parameters,
 				status & DEPEVT_STATUS_TRANSFER_ACTIVE ?
 				" (Active)" : " (Not Active)");
 
-		len = strlen(str);
-
 		/* Control Endpoints */
 		if (epnum <= 1) {
 			int phase = DEPEVT_STATUS_CONTROL_PHASE(event->status);
 
 			switch (phase) {
 			case DEPEVT_STATUS_CONTROL_DATA:
-				snprintf(str + ret, size - ret,
+				scnprintf(str + len, size - len,
 						" [Data Phase]");
 				break;
 			case DEPEVT_STATUS_CONTROL_STATUS:
-				snprintf(str + ret, size - ret,
+				scnprintf(str + len, size - len,
 						" [Status Phase]");
 			}
 		}
 		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		snprintf(str + ret, size - ret, "FIFO");
+		scnprintf(str + len, size - len, "FIFO");
 		break;
 	case DWC3_DEPEVT_STREAMEVT:
 		status = event->status;
 
 		switch (status) {
 		case DEPEVT_STREAMEVT_FOUND:
-			snprintf(str + ret, size - ret, " Stream %d Found",
+			scnprintf(str + len, size - len, " Stream %d Found",
 					event->parameters);
 			break;
 		case DEPEVT_STREAMEVT_NOTFOUND:
 		default:
-			snprintf(str + ret, size - ret, " Stream Not Found");
+			scnprintf(str + len, size - len, " Stream Not Found");
 			break;
 		}
 
 		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
-		snprintf(str + ret, size - ret, "Endpoint Command Complete");
+		scnprintf(str + len, size - len, "Endpoint Command Complete");
 		break;
 	default:
-		snprintf(str, size, "UNKNOWN");
+		scnprintf(str + len, size - len, "UNKNOWN");
 	}
 
 	return str;