Message ID | 20200219141817.24521-3-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | usb: dwc3: parkmode_disable_ss_quirk on DWC3 controller | expand |
Neil Armstrong <narmstrong@baylibre.com> 于2020年2月19日周三 下午10:18写道: > > In certain circumstances, the XHCI SuperSpeed instance in park mode > can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high > load on the single XHCI SuperSpeed instance, the controller can crash like: > xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. > xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 > xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead > xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. > hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) > xhci-hcd xhci-hcd.0.auto: HC died; cleaning up > usb 2-1.1-port1: cannot reset (err = -22) > > Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates > the issue. The bit is described as : > "When this bit is set to '1' all SS bus instances in park mode are disabled" > > Synopsys explains in [1]: > The GUCTL1.PARKMODE_DISABLE_SS is only available in > dwc_usb3 controller running in host mode. > This should not be set for other IPs. > This can be disabled by default based on IP, but I recommend to have a > property to enable this feature for devices that need this. > > [1] https://lore.kernel.org/linux-usb/45212db9-e366-2669-5c0a-3c5bd06287f6@synopsys.com This is not for gadget, patch title should be: usb: dwc3: core: add support... Li Jun
On 21/02/2020 02:59, Jun Li wrote: > Neil Armstrong <narmstrong@baylibre.com> 于2020年2月19日周三 下午10:18写道: >> >> In certain circumstances, the XHCI SuperSpeed instance in park mode >> can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high >> load on the single XHCI SuperSpeed instance, the controller can crash like: >> xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. >> xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 >> xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead >> xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. >> hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) >> xhci-hcd xhci-hcd.0.auto: HC died; cleaning up >> usb 2-1.1-port1: cannot reset (err = -22) >> >> Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates >> the issue. The bit is described as : >> "When this bit is set to '1' all SS bus instances in park mode are disabled" >> >> Synopsys explains in [1]: >> The GUCTL1.PARKMODE_DISABLE_SS is only available in >> dwc_usb3 controller running in host mode. >> This should not be set for other IPs. >> This can be disabled by default based on IP, but I recommend to have a >> property to enable this feature for devices that need this. >> >> [1] https://lore.kernel.org/linux-usb/45212db9-e366-2669-5c0a-3c5bd06287f6@synopsys.com > > This is not for gadget, patch title should be: > > usb: dwc3: core: add support... > > Li Jun > Indeed... time for a v4. Thanks, Neil
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 1d85c42b9c67..43bd5b1ea9e2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1029,6 +1029,9 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->dis_tx_ipgap_linecheck_quirk) reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; + if (dwc->parkmode_disable_ss_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } @@ -1342,6 +1345,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-ss-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 77c4a9abe365..3ecc69c5b150 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -249,6 +249,7 @@ #define DWC3_GUCTL_HSTINAUTORETRY BIT(14) /* Global User Control 1 Register */ +#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) @@ -1024,6 +1025,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed + * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1215,6 +1218,7 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned parkmode_disable_ss_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2;
In certain circumstances, the XHCI SuperSpeed instance in park mode can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high load on the single XHCI SuperSpeed instance, the controller can crash like: xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) xhci-hcd xhci-hcd.0.auto: HC died; cleaning up usb 2-1.1-port1: cannot reset (err = -22) Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates the issue. The bit is described as : "When this bit is set to '1' all SS bus instances in park mode are disabled" Synopsys explains in [1]: The GUCTL1.PARKMODE_DISABLE_SS is only available in dwc_usb3 controller running in host mode. This should not be set for other IPs. This can be disabled by default based on IP, but I recommend to have a property to enable this feature for devices that need this. [1] https://lore.kernel.org/linux-usb/45212db9-e366-2669-5c0a-3c5bd06287f6@synopsys.com CC: Dongjin Kim <tobetter@gmail.com> Cc: Jianxin Pan <jianxin.pan@amlogic.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Jun Li <lijun.kernel@gmail.com> Reported-by: Tim <elatllat@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/usb/dwc3/core.c | 5 +++++ drivers/usb/dwc3/core.h | 4 ++++ 2 files changed, 9 insertions(+)