@@ -31,6 +31,7 @@
#define AX_ACCESS_PHY 0x02
#define AX_ACCESS_EEPROM 0x04
#define AX_ACCESS_EFUS 0x05
+#define AX_RELOAD_EEPROM_EFUSE 0x06
#define AX_PAUSE_WATERLVL_HIGH 0x54
#define AX_PAUSE_WATERLVL_LOW 0x55
@@ -611,6 +612,81 @@ ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
return 0;
}
+static int
+ax88179_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *eeprom_buff;
+ int first_word;
+ int last_word;
+ int ret;
+ int i;
+
+ netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+ eeprom->len, eeprom->offset, eeprom->magic);
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ if (eeprom->magic != AX88179_EEPROM_MAGIC)
+ return -EINVAL;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+ GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ /* align data to 16 bit boundaries, read the missing data from
+ the EEPROM */
+ if (eeprom->offset & 1) {
+ ret = ax88179_read_cmd(dev, AX_ACCESS_EEPROM, first_word, 1, 2,
+ &eeprom_buff[0]);
+ if (ret < 0) {
+ netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+ goto free;
+ }
+ }
+
+ if ((eeprom->offset + eeprom->len) & 1) {
+ ret = ax88179_read_cmd(dev, AX_ACCESS_EEPROM, last_word, 1, 2,
+ &eeprom_buff[last_word - first_word]);
+ if (ret < 0) {
+ netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+ goto free;
+ }
+ }
+
+ memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+ for (i = first_word; i <= last_word; i++) {
+ netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+ i, eeprom_buff[i - first_word]);
+ ret = ax88179_write_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+ &eeprom_buff[i - first_word]);
+ if (ret < 0) {
+ netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", i);
+ goto free;
+ }
+ msleep(20);
+ }
+
+ /* reload EEPROM data */
+ ret = ax88179_write_cmd(dev, AX_RELOAD_EEPROM_EFUSE, 0x0000, 0, 0, NULL);
+ if (ret < 0) {
+ netdev_err(net, "Failed to reload EEPROM data\n");
+ goto free;
+ }
+
+ ret = 0;
+free:
+ kfree(eeprom_buff);
+ return ret;
+}
+
static int ax88179_get_link_ksettings(struct net_device *net,
struct ethtool_link_ksettings *cmd)
{
@@ -822,6 +898,7 @@ static const struct ethtool_ops ax88179_ethtool_ops = {
.set_wol = ax88179_set_wol,
.get_eeprom_len = ax88179_get_eeprom_len,
.get_eeprom = ax88179_get_eeprom,
+ .set_eeprom = ax88179_set_eeprom,
.get_eee = ax88179_get_eee,
.set_eee = ax88179_set_eee,
.nway_reset = usbnet_nway_reset,
The vendor driver does upon failing to read a valid MAC address from EEPROM write the netdev's address back to EEPROM and invoking a EEPROM reload operation. Based on this we can implement the ethtool_ops set_eeprom and provide the means to populate the EEPROM from within Linux. It's worth noting that ax88179_get_eeprom() will return some default data unless the content of the EEPROM is deemed "complete", so until the EEPROM is fully populated (e.g. by running ethtool -e | ethtool -E) data written with ax88179_set_eeprom() will appear not to stick. The implementation is based on asix_set_eeprom(), from asix_common.c Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/net/usb/ax88179_178a.c | 77 ++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)