From patchwork Wed Apr 29 16:47:34 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11517905 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C1E8B112C for ; Wed, 29 Apr 2020 16:47:56 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B4B2120B1F for ; Wed, 29 Apr 2020 16:47:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727073AbgD2Qrz (ORCPT ); Wed, 29 Apr 2020 12:47:55 -0400 Received: from mx2.suse.de ([195.135.220.15]:58314 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727049AbgD2Qry (ORCPT ); Wed, 29 Apr 2020 12:47:54 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 4B358AD80; Wed, 29 Apr 2020 16:47:52 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, helgaas@kernel.org, linux-kernel@vger.kernel.org, Mathias Nyman Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, wahrenst@gmx.net, Nicolas Saenz Julienne Subject: [PATCH v7 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk Date: Wed, 29 Apr 2020 18:47:34 +0200 Message-Id: <20200429164734.21506-5-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200429164734.21506-1-nsaenzjulienne@suse.de> References: <20200429164734.21506-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideoCore. Inform VideoCore that VL805 was just reset. Also, as this creates a dependency between USB_PCI and VideoCore's firmware interface, and since USB_PCI can't be set as a module neither this can. Reflect that on the firmware interface Kconfg. Signed-off-by: Nicolas Saenz Julienne --- Changes since v5: - Fix Kconfig issue with allmodconfig Changes since v4: - Do not split up error message Changes since v3: - Add more complete error message Changes since v1: - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it gets compiled when needed. drivers/firmware/Kconfig | 3 ++- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 8007d4aa76dc..b42140cff8ac 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -178,8 +178,9 @@ config ISCSI_IBFT Otherwise, say N. config RASPBERRYPI_FIRMWARE - tristate "Raspberry Pi Firmware Driver" + bool "Raspberry Pi Firmware Driver" depends on BCM2835_MBOX + default USB_PCI help This option enables support for communicating with the firmware on the Raspberry Pi. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index beb2efa71341..0dc34668bb2a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,6 +16,9 @@ #include #include #include + +#include + #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) static void quirk_usb_early_handoff(struct pci_dev *pdev) { + int ret; + /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + ret = rpi_firmware_init_vl805(pdev); + if (ret) { + /* Firmware might be outdated, or something failed */ + dev_warn(&pdev->dev, + "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", + ret); + } + } + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && pdev->class != PCI_CLASS_SERIAL_USB_OHCI && pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&