@@ -1774,9 +1774,15 @@ void musb_host_rx(struct musb *musb, u8 epnum)
status = -EPIPE;
} else if (rx_csr & MUSB_RXCSR_H_ERROR) {
- musb_dbg(musb, "end %d RX proto error", epnum);
+ dev_err(musb->controller, "ep%d RX three-strikes error", epnum);
- status = -EPROTO;
+ /*
+ * The three-strikes error could only happen when the USB
+ * device is not accessible, for example detached or powered
+ * off. So return the fatal error -ESHUTDOWN so hopefully the
+ * USB device drivers won't immediately resubmit the same URB.
+ */
+ status = -ESHUTDOWN;
musb_writeb(epio, MUSB_RXINTERVAL, 0);
rx_csr &= ~MUSB_RXCSR_H_ERROR;
When a USB device attached to a hub got disconnected, MUSB controller generates RXCSR_RX_ERROR interrupt for the 3-strikes-out error. Currently the MUSB host driver returns -EPROTO in current URB, then the USB device driver could immediately resubmit the URB which causes MUSB generate RXCSR_RX_ERROR interrupt again. This circle causes interrupt storm then the hub never got a chance to report the USB device detach. To fix the interrupt storm, change the URB return code to -ESHUTDOWN for MUSB_RXCSR_H_ERROR interrupt, so that the USB device driver will not immediately resubmit the URB. Signed-off-by: Bin Liu <b-liu@ti.com> --- v2: added inline comments drivers/usb/musb/musb_host.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)