| Message ID | 20200612171334.26385-2-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Raspberry Pi 4 USB firmware initialization rework | expand |
Hi Nicolas, On Fri, 2020-06-12 at 19:13 +0200, Nicolas Saenz Julienne wrote: > The firmware running on the RPi VideoCore can be used to reset and > initialize HW controlled by the firmware. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > --- > Changes since v2: > - Add include file for reset IDs > > Changes since v1: > - Correct cells binding as per Florian's comment > - Change compatible string to be more generic > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > 2 files changed, 34 insertions(+) > create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > index b48ed875eb8e..23a885af3a28 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > @@ -39,6 +39,22 @@ properties: > - compatible > - "#clock-cells" > > + reset: > + type: object > + > + properties: > + compatible: > + const: raspberrypi,firmware-reset > + > + "#reset-cells": > + const: 1 > + description: > > + The argument is the ID of the firmware reset line to affect. > + > + required: > + - compatible > + - "#reset-cells" > + > additionalProperties: false > > required: > @@ -55,5 +71,10 @@ examples: > compatible = "raspberrypi,firmware-clocks"; > #clock-cells = <1>; > }; > + > + reset: reset { > + compatible = "raspberrypi,firmware-reset"; > + #reset-cells = <1>; > + }; > }; > ... > diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h > new file mode 100644 > index 000000000000..1a4f4c792723 > --- /dev/null > +++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h > @@ -0,0 +1,13 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2020 Nicolas Saenz Julienne > + * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com> > + */ > + > +#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H > +#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H > + > +#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0 > +#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1 > + > +#endif Are there going to be any more firmware controlled resets in the future? regards Philipp
Hi, On Wed, 2020-06-17 at 11:55 +0200, Philipp Zabel wrote: > Hi Nicolas, > > On Fri, 2020-06-12 at 19:13 +0200, Nicolas Saenz Julienne wrote: > > The firmware running on the RPi VideoCore can be used to reset and > > initialize HW controlled by the firmware. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > > > --- > > Changes since v2: > > - Add include file for reset IDs > > > > Changes since v1: > > - Correct cells binding as per Florian's comment > > - Change compatible string to be more generic > > > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > > .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > > 2 files changed, 34 insertions(+) > > create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > > > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > index b48ed875eb8e..23a885af3a28 100644 > > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > @@ -39,6 +39,22 @@ properties: > > - compatible > > - "#clock-cells" > > > > + reset: > > + type: object > > + > > + properties: > > + compatible: > > + const: raspberrypi,firmware-reset > > + > > + "#reset-cells": > > + const: 1 > > + description: > > > + The argument is the ID of the firmware reset line to affect. > > + > > + required: > > + - compatible > > + - "#reset-cells" > > + > > additionalProperties: false > > > > required: > > @@ -55,5 +71,10 @@ examples: > > compatible = "raspberrypi,firmware-clocks"; > > #clock-cells = <1>; > > }; > > + > > + reset: reset { > > + compatible = "raspberrypi,firmware-reset"; > > + #reset-cells = <1>; > > + }; > > }; > > ... > > diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h > > b/include/dt-bindings/reset/raspberrypi,firmware-reset.h > > new file mode 100644 > > index 000000000000..1a4f4c792723 > > --- /dev/null > > +++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h > > @@ -0,0 +1,13 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright (c) 2020 Nicolas Saenz Julienne > > + * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com> > > + */ > > + > > +#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H > > +#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H > > + > > +#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0 > > +#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1 > > + > > +#endif > > Are there going to be any more firmware controlled resets in the future? There are not right now, but it's likely some will show up in the future. I have some contenders in mind, which I'll request once we settle on a design here, but it ultimately depends on what the RPi people decide to implement. Regards, Nicolas
On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote: > The firmware running on the RPi VideoCore can be used to reset and > initialize HW controlled by the firmware. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > --- > Changes since v2: > - Add include file for reset IDs > > Changes since v1: > - Correct cells binding as per Florian's comment > - Change compatible string to be more generic > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > 2 files changed, 34 insertions(+) > create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > index b48ed875eb8e..23a885af3a28 100644 > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml > @@ -39,6 +39,22 @@ properties: > - compatible > - "#clock-cells" > > + reset: I'm not really thrilled how this is evolving with a node per provider. There's no reason you can't just add #clock-cells and #reset-cells to the parent firmware node. I probably should have complained with the clocks node, but that's only pending for 5.9. The bigger issue is this stuff is just trickling in one bit at a time which gives no context for review. What's next? Is it really a mystery as to what functions the firmware provides? You don't have to have a driver in place for every function. Rob
On Mon, 2020-07-13 at 12:23 -0600, Rob Herring wrote: > On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote: > > The firmware running on the RPi VideoCore can be used to reset and > > initialize HW controlled by the firmware. > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > > > --- > > Changes since v2: > > - Add include file for reset IDs > > > > Changes since v1: > > - Correct cells binding as per Florian's comment > > - Change compatible string to be more generic > > > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > > .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > > 2 files changed, 34 insertions(+) > > create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > > > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > index b48ed875eb8e..23a885af3a28 100644 > > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > firmware.yaml > > @@ -39,6 +39,22 @@ properties: > > - compatible > > - "#clock-cells" > > > > + reset: > > I'm not really thrilled how this is evolving with a node per provider. > There's no reason you can't just add #clock-cells and #reset-cells to > the parent firmware node. What are the downsides? The way I see it there is not much difference. And this way of handling things is feels more intuitive and flexible (overlays can control what to enable easily, we can take advantage of the platform device core). > I probably should have complained with the clocks node, but that's only > pending for 5.9. Note that there are more users for this pattern: "raspberrypi,firmware-ts" and "raspberrypi,firmware-gpio". Actually you were the one to originally propose this it[1]. :P There already is a fair amount of churn in these drivers because of all the DT changes we did in the past, and if we need to change how we integrate these again, I'd really like it to be for good. > The bigger issue is this stuff is just trickling in one bit at a time > which gives no context for review. What's next? Is it really a mystery > as to what functions the firmware provides? We have no control over it, RPi engineers integrate new designs and new firmware interfaces show up. This is a good example of it. I proposed them to use SCMI as it covers most of what they are already providing here. But no luck so far. > You don't have to have a driver in place for every function. I see your point, it could be more monolithic, that said, having a driver is essential. See the reverts I managed to pull off at the end of the series. [1] https://patchwork.kernel.org/patch/10166783/#21421571
On Tue, Jul 14, 2020 at 01:59:21PM +0200, Nicolas Saenz Julienne wrote: > On Mon, 2020-07-13 at 12:23 -0600, Rob Herring wrote: > > On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote: > > > The firmware running on the RPi VideoCore can be used to reset and > > > initialize HW controlled by the firmware. > > > > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > > Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > > > > > > --- > > > Changes since v2: > > > - Add include file for reset IDs > > > > > > Changes since v1: > > > - Correct cells binding as per Florian's comment > > > - Change compatible string to be more generic > > > > > > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > > > .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > > > 2 files changed, 34 insertions(+) > > > create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > > > > > > diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > > firmware.yaml > > > b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > > firmware.yaml > > > index b48ed875eb8e..23a885af3a28 100644 > > > --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > > firmware.yaml > > > +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > > > firmware.yaml > > > @@ -39,6 +39,22 @@ properties: > > > - compatible > > > - "#clock-cells" > > > > > > + reset: > > > > I'm not really thrilled how this is evolving with a node per provider. > > There's no reason you can't just add #clock-cells and #reset-cells to > > the parent firmware node. > > What are the downsides? The way I see it there is not much difference. And this > way of handling things is feels more intuitive and flexible (overlays can > control what to enable easily, we can take advantage of the platform device > core). What the OS wants can evolve, so designing around the current needs of the OS is not how bindings should be done. Using overlays to add clocks or resets wouldn't really work given they are spread out over the tree. And with clocks in particular, you'd have to replace dummy fixed clocks with actual firmware clocks. Sounds fragile and messy... > > I probably should have complained with the clocks node, but that's only > > pending for 5.9. > > Note that there are more users for this pattern: "raspberrypi,firmware-ts" and > "raspberrypi,firmware-gpio". Actually you were the one to originally propose > this it[1]. :P Sigh, this is why I dislike incomplete examples... Based on that, Acked-by: Rob Herring <robh@kernel.org> And please get gpio and ts converted to schema and referenced here before the next time I look at this. > There already is a fair amount of churn in these drivers because of all the DT > changes we did in the past, and if we need to change how we integrate these > again, I'd really like it to be for good. > > > The bigger issue is this stuff is just trickling in one bit at a time > > which gives no context for review. What's next? Is it really a mystery > > as to what functions the firmware provides? > > We have no control over it, RPi engineers integrate new designs and new > firmware interfaces show up. This is a good example of it. > > I proposed them to use SCMI as it covers most of what they are already > providing here. But no luck so far. Once we get tired of supporting all the different firmware interfaces and the mess they become, we'll just have to start refusing custom ones. Worked for PSCI. > > You don't have to have a driver in place for every function. > > I see your point, it could be more monolithic, that said, having a driver is > essential. See the reverts I managed to pull off at the end of the series. > > [1] https://patchwork.kernel.org/patch/10166783/#21421571 >
On 7/14/2020 2:07 PM, Rob Herring wrote: > On Tue, Jul 14, 2020 at 01:59:21PM +0200, Nicolas Saenz Julienne wrote: >> On Mon, 2020-07-13 at 12:23 -0600, Rob Herring wrote: >>> On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote: >>>> The firmware running on the RPi VideoCore can be used to reset and >>>> initialize HW controlled by the firmware. >>>> >>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >>>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> >>>> >>>> --- >>>> Changes since v2: >>>> - Add include file for reset IDs >>>> >>>> Changes since v1: >>>> - Correct cells binding as per Florian's comment >>>> - Change compatible string to be more generic >>>> >>>> .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ >>>> .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ >>>> 2 files changed, 34 insertions(+) >>>> create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- >>>> firmware.yaml >>>> b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- >>>> firmware.yaml >>>> index b48ed875eb8e..23a885af3a28 100644 >>>> --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- >>>> firmware.yaml >>>> +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- >>>> firmware.yaml >>>> @@ -39,6 +39,22 @@ properties: >>>> - compatible >>>> - "#clock-cells" >>>> >>>> + reset: >>> >>> I'm not really thrilled how this is evolving with a node per provider. >>> There's no reason you can't just add #clock-cells and #reset-cells to >>> the parent firmware node. >> >> What are the downsides? The way I see it there is not much difference. And this >> way of handling things is feels more intuitive and flexible (overlays can >> control what to enable easily, we can take advantage of the platform device >> core). > > What the OS wants can evolve, so designing around the current needs of > the OS is not how bindings should be done. > > Using overlays to add clocks or resets wouldn't really work given they > are spread out over the tree. And with clocks in particular, you'd have > to replace dummy fixed clocks with actual firmware clocks. Sounds > fragile and messy... > >>> I probably should have complained with the clocks node, but that's only >>> pending for 5.9. >> >> Note that there are more users for this pattern: "raspberrypi,firmware-ts" and >> "raspberrypi,firmware-gpio". Actually you were the one to originally propose >> this it[1]. :P > > Sigh, this is why I dislike incomplete examples... > > Based on that, > > Acked-by: Rob Herring <robh@kernel.org> > > And please get gpio and ts converted to schema and referenced here > before the next time I look at this. > >> There already is a fair amount of churn in these drivers because of all the DT >> changes we did in the past, and if we need to change how we integrate these >> again, I'd really like it to be for good. >> >>> The bigger issue is this stuff is just trickling in one bit at a time >>> which gives no context for review. What's next? Is it really a mystery >>> as to what functions the firmware provides? >> >> We have no control over it, RPi engineers integrate new designs and new >> firmware interfaces show up. This is a good example of it. >> >> I proposed them to use SCMI as it covers most of what they are already >> providing here. But no luck so far. > > Once we get tired of supporting all the different firmware interfaces > and the mess they become, we'll just have to start refusing custom ones. > Worked for PSCI. In this particular case, the Raspberry Pi Foundation VPU firmware should just implement SCMI and that would avoid having to write new client drivers for Linux, it is not clear to me why this has not been done yet.
On Tue, Jul 14, 2020 at 3:18 PM Florian Fainelli <f.fainelli@gmail.com> wrote: > > > > On 7/14/2020 2:07 PM, Rob Herring wrote: > > On Tue, Jul 14, 2020 at 01:59:21PM +0200, Nicolas Saenz Julienne wrote: > >> On Mon, 2020-07-13 at 12:23 -0600, Rob Herring wrote: > >>> On Fri, Jun 12, 2020 at 07:13:25PM +0200, Nicolas Saenz Julienne wrote: > >>>> The firmware running on the RPi VideoCore can be used to reset and > >>>> initialize HW controlled by the firmware. > >>>> > >>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > >>>> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> > >>>> > >>>> --- > >>>> Changes since v2: > >>>> - Add include file for reset IDs > >>>> > >>>> Changes since v1: > >>>> - Correct cells binding as per Florian's comment > >>>> - Change compatible string to be more generic > >>>> > >>>> .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 21 +++++++++++++++++++ > >>>> .../reset/raspberrypi,firmware-reset.h | 13 ++++++++++++ > >>>> 2 files changed, 34 insertions(+) > >>>> create mode 100644 include/dt-bindings/reset/raspberrypi,firmware-reset.h > >>>> > >>>> diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > >>>> firmware.yaml > >>>> b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > >>>> firmware.yaml > >>>> index b48ed875eb8e..23a885af3a28 100644 > >>>> --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > >>>> firmware.yaml > >>>> +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835- > >>>> firmware.yaml > >>>> @@ -39,6 +39,22 @@ properties: > >>>> - compatible > >>>> - "#clock-cells" > >>>> > >>>> + reset: > >>> > >>> I'm not really thrilled how this is evolving with a node per provider. > >>> There's no reason you can't just add #clock-cells and #reset-cells to > >>> the parent firmware node. > >> > >> What are the downsides? The way I see it there is not much difference. And this > >> way of handling things is feels more intuitive and flexible (overlays can > >> control what to enable easily, we can take advantage of the platform device > >> core). > > > > What the OS wants can evolve, so designing around the current needs of > > the OS is not how bindings should be done. > > > > Using overlays to add clocks or resets wouldn't really work given they > > are spread out over the tree. And with clocks in particular, you'd have > > to replace dummy fixed clocks with actual firmware clocks. Sounds > > fragile and messy... > > > >>> I probably should have complained with the clocks node, but that's only > >>> pending for 5.9. > >> > >> Note that there are more users for this pattern: "raspberrypi,firmware-ts" and > >> "raspberrypi,firmware-gpio". Actually you were the one to originally propose > >> this it[1]. :P > > > > Sigh, this is why I dislike incomplete examples... > > > > Based on that, > > > > Acked-by: Rob Herring <robh@kernel.org> > > > > And please get gpio and ts converted to schema and referenced here > > before the next time I look at this. > > > >> There already is a fair amount of churn in these drivers because of all the DT > >> changes we did in the past, and if we need to change how we integrate these > >> again, I'd really like it to be for good. > >> > >>> The bigger issue is this stuff is just trickling in one bit at a time > >>> which gives no context for review. What's next? Is it really a mystery > >>> as to what functions the firmware provides? > >> > >> We have no control over it, RPi engineers integrate new designs and new > >> firmware interfaces show up. This is a good example of it. > >> > >> I proposed them to use SCMI as it covers most of what they are already > >> providing here. But no luck so far. > > > > Once we get tired of supporting all the different firmware interfaces > > and the mess they become, we'll just have to start refusing custom ones. > > Worked for PSCI. > > In this particular case, the Raspberry Pi Foundation VPU firmware should > just implement SCMI and that would avoid having to write new client > drivers for Linux, it is not clear to me why this has not been done yet. Writing drivers is fun? Perhaps we should start refusing new firmware interfaces now. Rob
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml index b48ed875eb8e..23a885af3a28 100644 --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml @@ -39,6 +39,22 @@ properties: - compatible - "#clock-cells" + reset: + type: object + + properties: + compatible: + const: raspberrypi,firmware-reset + + "#reset-cells": + const: 1 + description: > + The argument is the ID of the firmware reset line to affect. + + required: + - compatible + - "#reset-cells" + additionalProperties: false required: @@ -55,5 +71,10 @@ examples: compatible = "raspberrypi,firmware-clocks"; #clock-cells = <1>; }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; }; ... diff --git a/include/dt-bindings/reset/raspberrypi,firmware-reset.h b/include/dt-bindings/reset/raspberrypi,firmware-reset.h new file mode 100644 index 000000000000..1a4f4c792723 --- /dev/null +++ b/include/dt-bindings/reset/raspberrypi,firmware-reset.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Nicolas Saenz Julienne + * Author: Nicolas Saenz Julienne <nsaenzjulienne@suse.com> + */ + +#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H +#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_RESET_H + +#define RASPBERRYPI_FIRMWARE_RESET_ID_USB 0 +#define RASPBERRYPI_FIRMWARE_RESET_NUM_IDS 1 + +#endif