@@ -9,11 +9,11 @@
/*
* Supports following chips:
- * driver h100i platinum
+ * h100i platinum
*
* Other products should work with this driver but no testing has been done.
*
- * Note: platinum is the codename name for pro within driver
+ * Note: platinum is the codename name for pro within driver, so h100i platinum = h1ooi pro
*
* Note: fan curve controll has not been implemented
*/
@@ -50,7 +50,7 @@ struct curve_point {
uint8_t pwm;
};
-struct fan_hwmon_data {
+struct hwmon_fan_data {
char fan_channel;
long fan_target;
unsigned char fan_pwm_target;
@@ -62,7 +62,6 @@ struct hwmon_data {
struct driver *dev;
int channel_count;
void **channel_data;
- int fan_1_index;
};
struct curve_point default_curve[] = {
@@ -105,10 +104,10 @@ static bool check_succes(char command, char ret[SUCCES_LENGTH])
{
char success[SUCCES_LENGTH] = { command };
strncpy(&success[1], SUCCESS, SUCCES_LENGTH - 1);
- return strncmp(ret, success, SUCCES_LENGTH) == 0;
+ return strncmp(ret, success, SUCCES_LENGTH - 1) == 0;
}
-int set_fan_rpm_curve(struct driver *cdev, struct fan_hwmon_data *fan_data,
+int set_fan_rpm_curve(struct driver *cdev, struct hwmon_fan_data *fan_data,
struct curve_point point[7])
{
int retval;
@@ -145,14 +144,12 @@ int set_fan_rpm_curve(struct driver *cdev, struct fan_hwmon_data *fan_data,
if (retval != 0)
return retval;
- if (!check_succes(
- send_buf[0],
- recv_buf) /* || recv_buf[3] != fan_data->fan_channel */)
+ if (!check_succes(send_buf[0], recv_buf))
printk(KERN_INFO "[*] Failled setting fan curve %d,%d,%d/%d\n",
recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
return 0;
}
-int set_fan_target_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+int set_fan_target_rpm(struct driver *cdev, struct hwmon_fan_data *fan_data,
long val)
{
int retval;
@@ -180,17 +177,16 @@ int set_fan_target_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
return retval;
//no error
- if (!check_succes(send_buf[0], recv_buf) ||
- recv_buf[3] != fan_data->fan_channel)
+ if (!check_succes(send_buf[0], recv_buf))
printk(KERN_INFO "[*] Failled setting fan rpm %d,%d,%d/%d\n",
recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
return 0;
}
-void get_fan_target_rpm(struct fan_hwmon_data *fan_data, long *val)
+void get_fan_target_rpm(struct hwmon_fan_data *fan_data, long *val)
{
*val = fan_data->fan_target;
}
-int get_fan_current_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+int get_fan_current_rpm(struct driver *cdev, struct hwmon_fan_data *fan_data,
long *val)
{
int retval;
@@ -221,7 +217,7 @@ int get_fan_current_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
return 0;
}
-int set_fan_target_pwm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+int set_fan_target_pwm(struct driver *cdev, struct hwmon_fan_data *fan_data,
long val)
{
int retval;
@@ -248,8 +244,7 @@ int set_fan_target_pwm(struct driver *cdev, struct fan_hwmon_data *fan_data,
return retval;
//no error
- if (!check_succes(send_buf[0], recv_buf) ||
- recv_buf[3] != fan_data->fan_channel)
+ if (!check_succes(send_buf[0], recv_buf))
printk(KERN_INFO "[*] Failled setting fan pwm %d,%d,%d/%d\n",
recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
return 0;
@@ -298,7 +293,7 @@ static int write_func(struct device *dev, enum hwmon_sensor_types type,
{
struct hwmon_data *data = dev_get_drvdata(dev);
struct driver *cdev = data->dev;
- struct fan_hwmon_data *fan_data;
+ struct hwmon_fan_data *fan_data;
int retval = 0;
switch (type) {
@@ -404,7 +399,7 @@ int read_func(struct device *dev, enum hwmon_sensor_types type, u32 attr,
{
struct hwmon_data *data = dev_get_drvdata(dev);
struct driver *cdev = data->dev;
- struct fan_hwmon_data *fan_data;
+ struct hwmon_fan_data *fan_data;
int retval = 0;
if (channel >= data->channel_count)
return -EAGAIN;
@@ -469,14 +464,8 @@ int read_func(struct device *dev, enum hwmon_sensor_types type, u32 attr,
exit:
return retval;
}
-static const struct hwmon_channel_info *dual_fan[] = {
- HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN),
- HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_MODE,
- HWMON_PWM_INPUT | HWMON_PWM_MODE),
-
- NULL
-};
+#define fan_config HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN
+#define pwm_config HWMON_PWM_INPUT | HWMON_PWM_MODE
static const struct hwmon_ops asetek_6_ops = {
.is_visible = is_visible_func,
@@ -484,40 +473,93 @@ static const struct hwmon_ops asetek_6_ops = {
.write = write_func,
};
-static const struct hwmon_chip_info lm75_chip_info = {
- .ops = &asetek_6_ops,
- .info = dual_fan,
-};
+bool does_fan_exist(struct driver *cdev, int channel)
+{
+ int retval;
+ int wrote;
+ int sndpipe = usb_sndbulkpipe(cdev->udev, cdev->bulk_out_endpointAddr);
+ int rcvpipe = usb_rcvbulkpipe(cdev->udev, cdev->bulk_in_endpointAddr);
+
+ char *send_buf = cdev->bulk_out_buffer;
+ char *recv_buf = cdev->bulk_in_buffer;
+
+ send_buf[0] = 0x43;
+ send_buf[1] = channel;
+ send_buf[2] = (600 >> 8);
+ send_buf[3] = 600;
+
+ retval = usb_bulk_msg(cdev->udev, sndpipe, send_buf, 4, &wrote, 100);
+ if (retval != 0)
+ return false;
+
+ retval = usb_bulk_msg(cdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
+ if (retval != 0)
+ return false;
+
+ if (!check_succes(send_buf[0], recv_buf))
+ return false;
+ return true;
+}
+
+int get_fan_count(struct driver *dev)
+{
+ int fan;
+ for (fan = 0; does_fan_exist(dev, fan); fan += 1) {
+ }
+ return fan;
+}
void hwmon_init(struct driver *dev)
{
+ int fan_id;
struct device *hwmon_dev;
+ struct hwmon_fan_data *fan;
struct hwmon_data *data = devm_kzalloc(
&dev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL);
struct hwmon_chip_info *hwmon_info = devm_kzalloc(
&dev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL);
- struct fan_hwmon_data *fan1 = devm_kzalloc(
- &dev->udev->dev, sizeof(struct fan_hwmon_data), GFP_KERNEL);
- struct fan_hwmon_data *fan2 = devm_kzalloc(
- &dev->udev->dev, sizeof(struct fan_hwmon_data), GFP_KERNEL);
- data->channel_count = 2; //amount of fans
+ struct hwmon_channel_info **aio_info =
+ devm_kzalloc(&dev->udev->dev,
+ sizeof(struct hwmon_channel_info *) * 2,
+ GFP_KERNEL); //2==amount of channel infos.
+ u32 *fans_config = devm_kzalloc(&dev->udev->dev,
+ sizeof(u32) * (data->channel_count + 1),
+ GFP_KERNEL);
+ u32 *pwms_config = devm_kzalloc(&dev->udev->dev,
+ sizeof(u32) * (data->channel_count + 1),
+ GFP_KERNEL);
+
+ data->channel_count = get_fan_count(dev); //amount of fans
data->channel_data =
devm_kzalloc(&dev->udev->dev,
sizeof(char *) * data->channel_count, GFP_KERNEL);
- hwmon_info->ops = &asetek_6_ops;
- hwmon_info->info = dual_fan;
+ for (fan_id = 0; fan_id <= data->channel_count; fan_id++) {
+ fan = devm_kzalloc(&dev->udev->dev,
+ sizeof(struct hwmon_fan_data), GFP_KERNEL);
+ fan->fan_channel = fan_id;
+ fan->mode = 2;
+ data->channel_data[fan_id] = fan;
+ fans_config[fan_id] = fan_config;
+ pwms_config[fan_id] = pwm_config;
+ }
+ fans_config[data->channel_count] = 0;
+ pwms_config[data->channel_count] = 0;
- fan1->fan_channel = 0;
- fan1->mode = 2;
- fan2->fan_channel = 1;
- fan2->mode = 2;
+ aio_info[0] = devm_kzalloc(
+ &dev->udev->dev, sizeof(struct hwmon_channel_info), GFP_KERNEL);
+ aio_info[0]->type = hwmon_fan;
+ aio_info[0]->config = fans_config;
- data->fan_1_index = 0;
- data->dev = dev;
- data->channel_data[0] = fan1;
- data->channel_data[1] = fan2;
+ aio_info[1] = devm_kzalloc(
+ &dev->udev->dev, sizeof(struct hwmon_channel_info), GFP_KERNEL);
+ aio_info[1]->type = hwmon_pwm;
+ aio_info[1]->config = pwms_config;
+
+ hwmon_info->ops = &asetek_6_ops;
+ hwmon_info->info = (const struct hwmon_channel_info **)aio_info;
+ data->dev = dev;
hwmon_dev = devm_hwmon_device_register_with_info(
&dev->udev->dev, "driver_fan", data, hwmon_info, NULL);
printk(KERN_INFO "[*] Setup hwmon\n");
@@ -528,10 +570,14 @@ void hwmon_deinit(struct driver *dev)
hwmon_device_unregister(&dev->udev->dev);
printk(KERN_INFO "[*] HWMON DISCONNECT\n");
}
-/* devices that work with this driver */
+
+/*
+ Devices that work with this driver.
+ More devices should work, however none have been tested.
+*/
static const struct usb_device_id astk_table[] = {
{ USB_DEVICE(0x1b1c, 0x0c15) },
- {} /* Terminating entry */
+ {},
};
MODULE_DEVICE_TABLE(usb, astk_table);
@@ -604,13 +650,14 @@ static int astk_probe(struct usb_interface *interface,
dev->bulk_out_buffer = kmalloc(dev->bulk_out_size, GFP_KERNEL);
dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress;
- hwmon_init(dev);
retval = init_device(dev->udev);
if (retval) {
dev_err(&interface->dev, "Failled initialising this device.\n");
goto exit;
}
+ hwmon_init(dev);
+
usb_set_intfdata(interface, dev);
kref_init(&dev->kref);
mutex_init(&dev->io_mutex);
@@ -626,7 +673,6 @@ static void astk_disconnect(struct usb_interface *interface)
usb_set_intfdata(interface, NULL);
kref_put(&dev->kref, astk_delete);
deinit_device(dev->udev);
- /* let the user know what node this device is now attached to */
}
static int astk_resume(struct usb_interface *intf)
{
Signed-off-by: Jaap Aarts <jaap.aarts1@example.com> --- drivers/hwmon/asetek_gen6.c | 146 ++++++++++++++++++++++++------------ 1 file changed, 96 insertions(+), 50 deletions(-)