From patchwork Sun Aug 16 09:55:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: jaap aarts X-Patchwork-Id: 11716065 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4F30213A4 for ; Sun, 16 Aug 2020 09:56:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 2953F20772 for ; Sun, 16 Aug 2020 09:56:59 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="F6pNcmp0" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726886AbgHPJ46 (ORCPT ); Sun, 16 Aug 2020 05:56:58 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43886 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726787AbgHPJ44 (ORCPT ); Sun, 16 Aug 2020 05:56:56 -0400 Received: from mail-ej1-x636.google.com (mail-ej1-x636.google.com [IPv6:2a00:1450:4864:20::636]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 08A72C061786; Sun, 16 Aug 2020 02:56:56 -0700 (PDT) Received: by mail-ej1-x636.google.com with SMTP id o23so14452863ejr.1; Sun, 16 Aug 2020 02:56:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=mvYUahNxDnPkOLnZpRzALHyAwEVQ3UCRzGHsSO2gqGw=; b=F6pNcmp09M7NQEjAjEq0/7A750EPXLs0OD0r20KnWPxpMvbah6mxzvMo9flqQbNTld JZcGqE4BKMHxZK/M4s+aiXe61kyCF437F8vBVon27t3qsMFZ9XNILefxNMd0I78wUpze yRHqEQNIFjdgYjQOeq4YEv2Yozwu+GepsNAAaoHbGkGRkyx+HrrqDBPyRTWmp/naGeTw 6V4e7QFgQ0iwp8gmy2n7vze/pNBRGztPU96RFlhcfLBkW8exmrpDNoOF0XgdM/60U2an ICJZ45riVU6OaPwyXZmhAvzjxkK8t2v+DoisjnAhThcwtnQK/DGUAPYr752uZDz9iRNi dnWw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=mvYUahNxDnPkOLnZpRzALHyAwEVQ3UCRzGHsSO2gqGw=; b=aIh+p4fHocfs9R0bfLBKFASE27IsQw32o5Qj1a2vEB8WD/F26QhGWMLknLZtgKpNfk VB+XEZitZC6SYdk7x4O9nySokR/UJaEWU31fMaQB4xg+jK1QDmTMmNc6CWf5qQpRN+p3 USpXmM/EWh4rYER+RASn4wAeGD6qd2dHKMAoS2T3CjnBczXT0RXgnYlOah1lc/w/5dvn g5oqK9mFrgAy4T2KECVb16UvDmlIhiuEcF3ZRVYhUJd61K3zRk8a3IsMjfsnn8TyMlaK qR4gWe994ZXDPsh//o6YZ6xU4GM+PQCFGNq27iN7X19G5brwcwQYhPAVzl7Op1p9+NH6 0yzw== X-Gm-Message-State: AOAM533fawaCpmd4q4dMuc/IWXVEgipWYUe2F7/bzcOjlXw33Po2xvVW o+q2ZzK+tnqKRka8+PFULr8= X-Google-Smtp-Source: ABdhPJxPOg9I1HYe8zFe5jQIB9jYgFjvo5efacEohiIphyG7JL9pvQV9j8yWXv+cZw0ksDIKWGLE6A== X-Received: by 2002:a17:906:8608:: with SMTP id o8mr10816169ejx.156.1597571813822; Sun, 16 Aug 2020 02:56:53 -0700 (PDT) Received: from localhost.localdomain ([185.95.176.207]) by smtp.googlemail.com with ESMTPSA id r3sm11757188ejy.95.2020.08.16.02.56.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 16 Aug 2020 02:56:53 -0700 (PDT) From: jaap aarts To: Guenter Roeck , Jean Delvare , =?utf-8?q?Barnab=C3=A1s_P=C5=91cze?= , "linux-hwmon@vger.kernel.org" , "linux-usb@vger.kernel.org" Cc: jaap aarts Subject: [PATCH V5] hwmon: add fan/pwm driver for corsair h100i platinum Date: Sun, 16 Aug 2020 11:55:01 +0200 Message-Id: <20200816095500.123839-1-jaap.aarts1@gmail.com> X-Mailer: git-send-email 2.28.0 MIME-Version: 1.0 Sender: linux-usb-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Adds fan/pwm support for H100i platinum. Custom temp/fan curves are not supported. v5: - fixed #defines not being caps - check amount of written bytes + fixed expecting wrong amount - moved to `sizeof(var)` instead of `sizeof(type)` - fixed bounds checks - merged cases and simplefied switch statements - more error checking - destroy the mutex Signed-off-by: Jaap Aarts --- drivers/hwmon/Kconfig | 7 + drivers/hwmon/Makefile | 1 + drivers/hwmon/corsair_hydro_i_pro.c | 701 ++++++++++++++++++++++++++++ 3 files changed, 709 insertions(+) create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 288ae9f63588..f466b72d0f67 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -378,6 +378,13 @@ config SENSORS_ARM_SCPI and power sensors available on ARM Ltd's SCP based platforms. The actual number and type of sensors exported depend on the platform. +config SENSORS_CORSAIR_HYDRO_I_PRO + tristate "Corsair hydro HXXXi pro driver" + depends on USB + help + If you say yes here you get support for the corsair hydro HXXXi pro + range of devices. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3e32c21f5efe..ec63294b3ef1 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o obj-$(CONFIG_SENSORS_W83795) += w83795.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_W83791D) += w83791d.o +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c new file mode 100644 index 000000000000..c0c8a0e1dea9 --- /dev/null +++ b/drivers/hwmon/corsair_hydro_i_pro.c @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. + * Copyright (c) Jaap Aarts 2020 + * + * Protocol partially reverse engineered by audiohacked + * https://github.com/audiohacked/OpendriverLink + */ + +/* + * Supports following liquid coolers: + * H100i platinum + * + * Other products should work with this driver with slight modification. + * + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. + * But some products are actually called platinum, these are not intended to be supported (yet). + * + * Note: fan curve control has not been implemented + */ + +#include +#include +#include +#include +#include +#include + +struct device_config { + const u16 vendor_id; + const u16 product_id; + const u8 fancount; + const u16 rpm_min; + const u16 rpm_max; + const u8 pwm_max; + const char *name; + const struct hwmon_channel_info **hwmon_info; +}; + +struct hydro_i_pro_device { + struct usb_device *udev; + + const struct device_config *config; + + unsigned char *bulk_out_buffer; + unsigned char *bulk_in_buffer; + size_t bulk_out_size; + size_t bulk_in_size; + char bulk_in_endpointAddr; + char bulk_out_endpointAddr; + + struct usb_interface *interface; /* the interface for this device */ + struct mutex io_mutex; +}; + +#define MAX_FAN_COUNT 2 +#define MAX_PWM_CHANNEL_COUNT MAX_FAN_COUNT + +struct hwmon_data { + struct hydro_i_pro_device *hdev; + int channel_count; + void *channel_data[MAX_PWM_CHANNEL_COUNT]; +}; + +struct curve_point { + u8 temp; + u8 pwm; +}; + +#define FAN_CURVE_COUNT 7 + +struct hwmon_fan_data { + u8 fan_channel; + u16 fan_target; + u8 fan_pwm_target; + u8 mode; + struct curve_point curve[FAN_CURVE_COUNT]; +}; + +struct curve_point quiet_curve[FAN_CURVE_COUNT] = { + { + .temp = 0x1F, + .pwm = 0x15, + }, + { + .temp = 0x21, + .pwm = 0x1E, + }, + { + .temp = 0x24, + .pwm = 0x25, + }, + { + .temp = 0x27, + .pwm = 0x2D, + }, + { + .temp = 0x29, + .pwm = 0x38, + }, + { + .temp = 0x2C, + .pwm = 0x4A, + }, + { + .temp = 0x2F, + .pwm = 0x64, + }, +}; + +#define DEFAULT_CURVE quiet_curve + +static const struct hwmon_channel_info *dual_fan[] = { + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN, + HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN), + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE, + HWMON_PWM_INPUT | HWMON_PWM_ENABLE), + + NULL +}; + +static const struct device_config config_table[] = { + { + .vendor_id = 0x1b1c, + .product_id = 0x0c15, + .fancount = 2, + .rpm_min = 200, + .rpm_max = 3000, + .pwm_max = 100, + .name = "corsair_H100i_pro", + .hwmon_info = dual_fan, + }, +}; + +#define BULK_TIMEOUT 100 + +enum opcodes { + PWM_FAN_CURVE_CMD = 0x40, + PWM_GET_CURRENT_CMD = 0x41, + PWM_FAN_TARGET_CMD = 0x42, + RPM_FAN_TARGET_CMD = 0x43, +}; + +#define SUCCES_LENGTH 3 +#define SUCCES_CODE 0x12, 0x34 + +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) +{ + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; + + return memcmp(ret, success, SUCCES_LENGTH) == 0; +} + +static int acquire_lock(struct hydro_i_pro_device *hdev) +{ + int retval = usb_autopm_get_interface(hdev->interface); + + if (retval) + return retval; + + mutex_lock(&hdev->io_mutex); + return 0; +} + +static int transfer_usb(struct hydro_i_pro_device *hdev, + unsigned char *send_buf, unsigned char *recv_buf, + int send_len, int recv_len) +{ + int retval; + int wrote; + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); + + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, send_len, &wrote, + BULK_TIMEOUT); + if (retval) + return retval; + if (wrote != send_len) + return -EIO; + + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, recv_len, &wrote, + BULK_TIMEOUT); + if (retval) + return retval; + if (wrote != recv_len) + return -EIO; + + return 0; +} + +static int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, + struct curve_point point[static FAN_CURVE_COUNT]) +{ + int retval; + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); + + send_buf[0] = PWM_FAN_CURVE_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[2] = point[0].temp; + send_buf[3] = point[1].temp; + send_buf[4] = point[2].temp; + send_buf[5] = point[3].temp; + send_buf[6] = point[4].temp; + send_buf[7] = point[5].temp; + send_buf[8] = point[6].temp; + send_buf[9] = point[0].pwm; + send_buf[10] = point[1].pwm; + send_buf[11] = point[2].pwm; + send_buf[12] = point[3].pwm; + send_buf[13] = point[4].pwm; + send_buf[14] = point[5].pwm; + send_buf[15] = point[6].pwm; + + retval = transfer_usb(hdev, send_buf, recv_buf, 16, 3); + if (retval) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_warn( + &hdev->udev->dev, + "failed setting fan pwm/temp curve for %s on channel %d %d,%d,%d\n", + hdev->config->name, fan_data->fan_channel, recv_buf[0], + recv_buf[1], recv_buf[2]); + return -EINVAL; + } + return 0; +} + +static int set_fan_target_rpm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, u16 val) +{ + int retval; + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + fan_data->fan_target = val; + fan_data->fan_pwm_target = 0; + + send_buf[0] = RPM_FAN_TARGET_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[2] = (fan_data->fan_target >> 8); + send_buf[3] = fan_data->fan_target; + + retval = transfer_usb(hdev, send_buf, recv_buf, 4, 3); + if (retval) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_warn( + &hdev->udev->dev, + "failed setting fan rpm for %s on channel %d %d,%d,%d\n", + hdev->config->name, fan_data->fan_channel, recv_buf[0], + recv_buf[1], recv_buf[2]); + return -EINVAL; + } + return 0; +} + +static int get_fan_current_rpm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, long *val) +{ + int retval; + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + send_buf[0] = PWM_GET_CURRENT_CMD; + send_buf[1] = fan_data->fan_channel; + + retval = transfer_usb(hdev, send_buf, recv_buf, 2, 6); + if (retval) + return retval; + + if (!check_succes(send_buf[0], recv_buf) || + recv_buf[3] != fan_data->fan_channel) { + dev_warn( + &hdev->udev->dev, + "failed retrieving fan pwm for %s on channel %d %d,%d,%d/%d\n", + hdev->config->name, fan_data->fan_channel, recv_buf[0], + recv_buf[1], recv_buf[2], recv_buf[3]); + return -EINVAL; + } + + *val = ((recv_buf[4]) << 8) + recv_buf[5]; + return 0; +} + +static int set_fan_target_pwm(struct hydro_i_pro_device *hdev, + struct hwmon_fan_data *fan_data, u8 val) +{ + int retval; + unsigned char *send_buf = hdev->bulk_out_buffer; + unsigned char *recv_buf = hdev->bulk_in_buffer; + + fan_data->fan_target = 0; + fan_data->fan_pwm_target = val; + + send_buf[0] = PWM_FAN_TARGET_CMD; + send_buf[1] = fan_data->fan_channel; + send_buf[2] = fan_data->fan_pwm_target; + dev_info(&hdev->udev->dev, "debug:%d,%d,%d", send_buf[0], send_buf[1], + send_buf[2]); + dev_info(&hdev->udev->dev, "val:%d", fan_data->fan_pwm_target); + + retval = transfer_usb(hdev, send_buf, recv_buf, 3, 3); + if (retval) + return retval; + + if (!check_succes(send_buf[0], recv_buf)) { + dev_warn( + &hdev->udev->dev, + "failed setting fan pwm for %s on channel %d %d,%d,%d\n", + hdev->config->name, fan_data->fan_channel, recv_buf[0], + recv_buf[1], recv_buf[2]); + return -EINVAL; + } + return 0; +} + +static umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + return 0444; + case hwmon_fan_target: + return 0644; + case hwmon_fan_min: + return 0444; + } + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + return 0200; + case hwmon_pwm_enable: + return 0644; + } + } + return 0; +} + +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct hwmon_data *data = dev_get_drvdata(dev); + struct hydro_i_pro_device *hdev = data->hdev; + struct hwmon_fan_data *fan_data; + int retval = 0; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_target: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) + return -EINVAL; + + val = clamp_val(val, hdev->config->rpm_min, + hdev->config->rpm_max); + + retval = acquire_lock(hdev); + if (retval) + goto exit; + + retval = set_fan_target_rpm(hdev, fan_data, val); + if (retval) + goto cleanup; + + break; + default: + return -EINVAL; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) + return -EINVAL; + + val = clamp_val(val, 0, hdev->config->pwm_max); + dev_info(&hdev->udev->dev, "val:%ld", val); + retval = acquire_lock(hdev); + if (retval) + goto exit; + + retval = set_fan_target_pwm(hdev, fan_data, val); + if (retval) + goto cleanup; + + break; + case hwmon_pwm_enable: + fan_data = data->channel_data[channel]; + + switch (val) { + case 2: + case 0: + retval = acquire_lock(hdev); + if (retval) + goto exit; + + retval = set_fan_pwm_curve(hdev, fan_data, + DEFAULT_CURVE); + if (retval) + goto cleanup; + fan_data->mode = 0; + break; + case 1: + retval = acquire_lock(hdev); + if (retval) + goto exit; + + if (fan_data->fan_target != 0) { + retval = set_fan_target_rpm( + hdev, fan_data, + fan_data->fan_target); + if (retval) + goto cleanup; + } else if (fan_data->fan_pwm_target != 0) { + retval = set_fan_target_pwm( + hdev, fan_data, + fan_data->fan_pwm_target); + if (retval) + goto cleanup; + } + fan_data->mode = 1; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + +cleanup: + mutex_unlock(&hdev->io_mutex); + usb_autopm_put_interface(hdev->interface); +exit: + return retval; +} + +static int hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct hwmon_data *data = dev_get_drvdata(dev); + struct hydro_i_pro_device *hdev = data->hdev; + struct hwmon_fan_data *fan_data; + int retval = 0; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_input: + fan_data = data->channel_data[channel]; + + retval = acquire_lock(hdev); + if (retval) + goto exit; + + retval = get_fan_current_rpm(hdev, fan_data, val); + break; + case hwmon_fan_target: + fan_data = data->channel_data[channel]; + if (fan_data->mode != 1) { + *val = 0; + goto exit; + } + *val = fan_data->fan_target; + goto exit; + case hwmon_fan_min: + *val = hdev->config->rpm_min; + goto exit; + + default: + return -EINVAL; + } + break; + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_enable: + fan_data = data->channel_data[channel]; + *val = fan_data->mode; + goto exit; + default: + return -EINVAL; + } + goto exit; + + default: + return -EINVAL; + } + + mutex_unlock(&hdev->io_mutex); + usb_autopm_put_interface(hdev->interface); +exit: + return retval; +} + +static const struct hwmon_ops i_pro_ops = { + .is_visible = hwmon_is_visible, + .read = hwmon_read, + .write = hwmon_write, +}; + +static int hwmon_init(struct hydro_i_pro_device *hdev) +{ + u8 fan_id; + struct device *hwmon_dev; + struct hwmon_fan_data *fan; + struct hwmon_data *data; + struct hwmon_chip_info *hwmon_info; + + data = devm_kzalloc(&hdev->udev->dev, sizeof(*data), GFP_KERNEL); + hwmon_info = devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_chip_info), GFP_KERNEL); + + /* You did something bad!! Either adjust MAX_FAN_COUNT or the fancount for the config!*/ + WARN_ON(hdev->config->fancount >= MAX_PWM_CHANNEL_COUNT); + data->channel_count = + clamp_val(hdev->config->fancount, 0, MAX_PWM_CHANNEL_COUNT); + + /* For each fan create a data channel a fan config entry and a pwm config entry */ + for (fan_id = 0; fan_id < data->channel_count; fan_id++) { + fan = devm_kzalloc(&hdev->udev->dev, + sizeof(struct hwmon_fan_data), GFP_KERNEL); + fan->fan_channel = fan_id; + fan->mode = 0; + data->channel_data[fan_id] = fan; + } + + hwmon_info->ops = &i_pro_ops; + hwmon_info->info = hdev->config->hwmon_info; + + data->hdev = hdev; + hwmon_dev = devm_hwmon_device_register_with_info( + &hdev->udev->dev, hdev->config->name, data, hwmon_info, NULL); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(&hdev->udev->dev, "setup hwmon for %s\n", hdev->config->name); + return 0; +} + +#define USB_VENDOR_ID_CORSAIR 0x1b1c +#define USB_PRODUCT_ID_H100I_PRO 0x0c15 +/* + * Devices that work with this driver. + * More devices should work, however none have been tested. + */ +static const struct usb_device_id astk_table[] = { + { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_H100I_PRO), + .driver_info = (kernel_ulong_t)&config_table[0] }, + {}, +}; + +MODULE_DEVICE_TABLE(usb, astk_table); + +static int init_device(struct usb_device *udev) +{ + int retval; + + /* + * This is needed because when running windows in a vm with proprietary driver + * and you switch to this driver, the device will not respond unless you run this. + */ + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, + 0xffff, 0x0000, 0, 0, 0); + + /*this always returns error, but it required for propper initialisation*/ + if (retval != -EPIPE) + return retval; + + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, + 0x0002, 0x0000, 0, 0, 0); +} + +static int deinit_device(struct usb_device *udev) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, + 0x0004, 0x0000, 0, 0, 0); +} + +static void astk_delete(struct hydro_i_pro_device *hdev) +{ + usb_put_intf(hdev->interface); + usb_put_dev(hdev->udev); + mutex_destroy(&hdev->io_mutex); + kfree(hdev->bulk_in_buffer); + kfree(hdev->bulk_out_buffer); + kfree(hdev); +} + +static int astk_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct hydro_i_pro_device *hdev; + int retval; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); + + if (!hdev) { + kfree(hdev); + retval = -ENOMEM; + goto exit; + } + + hdev->config = (const struct device_config *)id->driver_info; + /* You should set the driver_info to a pointer to the correct configuration!!*/ + WARN_ON(!hdev->config); + + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, + &bulk_out, NULL, NULL); + if (retval) { + kfree(hdev); + goto exit; + } + + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); + hdev->interface = usb_get_intf(interface); + + /* + * set up the endpoint information + * use only the first bulk-in and bulk-out endpoints + */ + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + + retval = init_device(hdev->udev); + if (retval) { + dev_err(&interface->dev, "failed initialising %s:%d\n", + hdev->config->name, retval); + kfree(hdev); + goto exit; + } + + retval = hwmon_init(hdev); + if (retval) { + dev_err(&interface->dev, "failed initialising hwmon%s:%d\n", + hdev->config->name, retval); + kfree(hdev); + goto exit; + } + + usb_set_intfdata(interface, hdev); + mutex_init(&hdev->io_mutex); +exit: + return retval; +} + +static void astk_disconnect(struct usb_interface *interface) +{ + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); + + dev_info(&hdev->udev->dev, "removed hwmon for %s\n", + hdev->config->name); + deinit_device(hdev->udev); + usb_set_intfdata(interface, NULL); + astk_delete(hdev); +} + +static int astk_resume(struct usb_interface *intf) +{ + return 0; +} + +static int astk_suspend(struct usb_interface *intf, pm_message_t message) +{ + return 0; +} + +static struct usb_driver hydro_i_pro_driver = { + .name = "hydro_i_pro_device", + .id_table = astk_table, + .probe = astk_probe, + .disconnect = astk_disconnect, + .resume = astk_resume, + .suspend = astk_suspend, + .supports_autosuspend = 1, +}; + +module_usb_driver(hydro_i_pro_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jaap Aarts "); +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); -- 2.28.0