diff mbox series

[v2,7/7] usb: host: xhci: avoid calling contineous two times for xhci_suspend

Message ID 20200817094440.23202-8-peter.chen@nxp.com (mailing list archive)
State Accepted
Commit 18a367e8947d72dd91b6fc401e88a2952c6363f7
Headers show
Series usb: host: xhci: some changes for xhci-plat.c | expand

Commit Message

Peter Chen Aug. 17, 2020, 9:44 a.m. UTC 
If the xhci-plat.c is the platform driver, after the runtime pm is
enabled, the xhci_suspend is called if nothing is connected on
the port. When the system goes to suspend, it will call xhci_suspend again
if USB wakeup is enabled.

Since the runtime suspend wakeup setting is not always the same with
system suspend wakeup setting, eg, at runtime suspend, we always need
wakeup if the controller is in low power mode; but at suspend system,
we may not need wakeup. So, we move the judgement after changing
wakeup setting.

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/host/xhci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3c41b14ecce7..cde71f3b9767 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -982,12 +982,15 @@  int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
-	xhci_dbc_suspend(xhci);
-
 	/* Clear root port wake on bits if wakeup not allowed. */
 	if (!do_wakeup)
 		xhci_disable_port_wake_on_bits(xhci);
 
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return 0;
+
+	xhci_dbc_suspend(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);