diff mbox series

[v3,04/11] USB: core: hub.c: use usb_control_msg_send() in a few places

Message ID 20200914153756.3412156-5-gregkh@linuxfoundation.org (mailing list archive)
State Accepted
Commit d6a499249543356002a1efbb26254c7272e62f4c
Headers show
Series USB: new USB control message helper functions | expand

Commit Message

Greg Kroah-Hartman Sept. 14, 2020, 3:37 p.m. UTC 
There are a few calls to usb_control_msg() that can be converted to use
usb_control_msg_send() instead, so do that in order to make the error
checking a bit simpler and the code smaller.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v3:
 - drop change in usb_enable_link_state() as it was not needed now
   thanks to review from Alan
 - minor changes requested by checkpatch.pl

v2:
 - dropped changes to usb_req_set_sel() thanks to review from Alan

 drivers/usb/core/hub.c | 99 +++++++++++++++++-------------------------
 1 file changed, 40 insertions(+), 59 deletions(-)

Comments

Alan Stern Sept. 14, 2020, 6:06 p.m. UTC | #1 
On Mon, Sep 14, 2020 at 05:37:49PM +0200, Greg Kroah-Hartman wrote:
> There are a few calls to usb_control_msg() that can be converted to use
> usb_control_msg_send() instead, so do that in order to make the error
> checking a bit simpler and the code smaller.
> 
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> v3:
>  - drop change in usb_enable_link_state() as it was not needed now
>    thanks to review from Alan
>  - minor changes requested by checkpatch.pl
> 
> v2:
>  - dropped changes to usb_req_set_sel() thanks to review from Alan
> 
>  drivers/usb/core/hub.c | 99 +++++++++++++++++-------------------------
>  1 file changed, 40 insertions(+), 59 deletions(-)

Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Greg Kroah-Hartman Sept. 16, 2020, 9:06 a.m. UTC | #2 
On Mon, Sep 14, 2020 at 02:06:16PM -0400, Alan Stern wrote:
> On Mon, Sep 14, 2020 at 05:37:49PM +0200, Greg Kroah-Hartman wrote:
> > There are a few calls to usb_control_msg() that can be converted to use
> > usb_control_msg_send() instead, so do that in order to make the error
> > checking a bit simpler and the code smaller.
> > 
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> > v3:
> >  - drop change in usb_enable_link_state() as it was not needed now
> >    thanks to review from Alan
> >  - minor changes requested by checkpatch.pl
> > 
> > v2:
> >  - dropped changes to usb_req_set_sel() thanks to review from Alan
> > 
> >  drivers/usb/core/hub.c | 99 +++++++++++++++++-------------------------
> >  1 file changed, 40 insertions(+), 59 deletions(-)
> 
> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>

Thanks for the review!

greg k-h
diff mbox series

Patch

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5b768b80d1ee..5742ddeb0455 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -410,8 +410,8 @@  static int get_hub_descriptor(struct usb_device *hdev,
  */
 static int clear_hub_feature(struct usb_device *hdev, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_CLEAR_FEATURE, USB_RT_HUB,
+				    feature, 0, NULL, 0, 1000);
 }
 
 /*
@@ -419,9 +419,8 @@  static int clear_hub_feature(struct usb_device *hdev, int feature)
  */
 int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1,
-		NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_CLEAR_FEATURE, USB_RT_PORT,
+				    feature, port1, NULL, 0, 1000);
 }
 
 /*
@@ -429,9 +428,8 @@  int usb_clear_port_feature(struct usb_device *hdev, int port1, int feature)
  */
 static int set_port_feature(struct usb_device *hdev, int port1, int feature)
 {
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
-		NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, USB_REQ_SET_FEATURE, USB_RT_PORT,
+				    feature, port1, NULL, 0, 1000);
 }
 
 static char *to_led_name(int selector)
@@ -755,15 +753,14 @@  hub_clear_tt_buffer(struct usb_device *hdev, u16 devinfo, u16 tt)
 	/* Need to clear both directions for control ep */
 	if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
 			USB_ENDPOINT_XFER_CONTROL) {
-		int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-				HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
-				devinfo ^ 0x8000, tt, NULL, 0, 1000);
+		int status = usb_control_msg_send(hdev, 0,
+						  HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+						  devinfo ^ 0x8000, tt, NULL, 0, 1000);
 		if (status)
 			return status;
 	}
-	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
-			       tt, NULL, 0, 1000);
+	return usb_control_msg_send(hdev, 0, HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+				    devinfo, tt, NULL, 0, 1000);
 }
 
 /*
@@ -1049,11 +1046,10 @@  static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 	 */
 	if (type != HUB_RESUME) {
 		if (hdev->parent && hub_is_superspeed(hdev)) {
-			ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-					HUB_SET_DEPTH, USB_RT_HUB,
-					hdev->level - 1, 0, NULL, 0,
-					USB_CTRL_SET_TIMEOUT);
-			if (ret < 0)
+			ret = usb_control_msg_send(hdev, 0, HUB_SET_DEPTH, USB_RT_HUB,
+						   hdev->level - 1, 0, NULL, 0,
+						   USB_CTRL_SET_TIMEOUT);
+			if (ret)
 				dev_err(hub->intfdev,
 						"set hub depth failed\n");
 		}
@@ -2329,13 +2325,10 @@  static int usb_enumerate_device_otg(struct usb_device *udev)
 		/* enable HNP before suspend, it's simpler */
 		if (port1 == bus->otg_port) {
 			bus->b_hnp_enable = 1;
-			err = usb_control_msg(udev,
-				usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, 0,
-				USB_DEVICE_B_HNP_ENABLE,
-				0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-			if (err < 0) {
+			err = usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, 0,
+						   USB_DEVICE_B_HNP_ENABLE, 0,
+						   NULL, 0, USB_CTRL_SET_TIMEOUT);
+			if (err) {
 				/*
 				 * OTG MESSAGE: report errors here,
 				 * customize to match your product.
@@ -2347,13 +2340,10 @@  static int usb_enumerate_device_otg(struct usb_device *udev)
 		} else if (desc->bLength == sizeof
 				(struct usb_otg_descriptor)) {
 			/* Set a_alt_hnp_support for legacy otg device */
-			err = usb_control_msg(udev,
-				usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, 0,
-				USB_DEVICE_A_ALT_HNP_SUPPORT,
-				0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
-			if (err < 0)
+			err = usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, 0,
+						   USB_DEVICE_A_ALT_HNP_SUPPORT, 0,
+						   NULL, 0, USB_CTRL_SET_TIMEOUT);
+			if (err)
 				dev_err(&udev->dev,
 					"set a_alt_hnp_support failed: %d\n",
 					err);
@@ -3121,10 +3111,8 @@  int usb_disable_ltm(struct usb_device *udev)
 	if (!udev->actconfig)
 		return 0;
 
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
-			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
-			USB_CTRL_SET_TIMEOUT);
+	return usb_control_msg_send(udev, 0, USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+				    USB_DEVICE_LTM_ENABLE, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 EXPORT_SYMBOL_GPL(usb_disable_ltm);
 
@@ -3143,10 +3131,8 @@  void usb_enable_ltm(struct usb_device *udev)
 	if (!udev->actconfig)
 		return;
 
-	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-			USB_DEVICE_LTM_ENABLE, 0, NULL, 0,
-			USB_CTRL_SET_TIMEOUT);
+	usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+			     USB_DEVICE_LTM_ENABLE, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 EXPORT_SYMBOL_GPL(usb_enable_ltm);
 
@@ -3163,17 +3149,14 @@  EXPORT_SYMBOL_GPL(usb_enable_ltm);
 static int usb_enable_remote_wakeup(struct usb_device *udev)
 {
 	if (udev->speed < USB_SPEED_SUPER)
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+					    USB_DEVICE_REMOTE_WAKEUP, 0,
+					    NULL, 0, USB_CTRL_SET_TIMEOUT);
 	else
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
-				USB_INTRF_FUNC_SUSPEND,
-				USB_INTRF_FUNC_SUSPEND_RW |
-					USB_INTRF_FUNC_SUSPEND_LP,
-				NULL, 0, USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+					    USB_INTRF_FUNC_SUSPEND,
+					    USB_INTRF_FUNC_SUSPEND_RW | USB_INTRF_FUNC_SUSPEND_LP,
+					    NULL, 0, USB_CTRL_SET_TIMEOUT);
 }
 
 /*
@@ -3189,15 +3172,13 @@  static int usb_enable_remote_wakeup(struct usb_device *udev)
 static int usb_disable_remote_wakeup(struct usb_device *udev)
 {
 	if (udev->speed < USB_SPEED_SUPER)
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
-				USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+					    USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0,
+					    USB_CTRL_SET_TIMEOUT);
 	else
-		return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
-				USB_INTRF_FUNC_SUSPEND,	0, NULL, 0,
-				USB_CTRL_SET_TIMEOUT);
+		return usb_control_msg_send(udev, 0, USB_REQ_SET_FEATURE, USB_RECIP_INTERFACE,
+					    USB_INTRF_FUNC_SUSPEND, 0, NULL, 0,
+					    USB_CTRL_SET_TIMEOUT);
 }
 
 /* Count of wakeup-enabled devices at or below udev */