[v2,1/2] dt-bindings: usb: Add binding for onboard USB hubs

Commit Message

Matthias Kaehlcke Sept. 17, 2020, 6:46 p.m. UTC

Onboard USB hubs need to be powered and may require initiaization of
other resources (like GPIOs or clocks) to work properly. This adds
a device tree binding for these hubs.

Signed-off-by: Matthias Kaehlcke <[e-mail]>
---

Changes in v2:
- removed 'wakeup-source' and 'power-off-in-suspend' properties
- consistently use spaces for indentation in example

 .../bindings/usb/onboard_usb_hub.yaml         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml

Comments

Rob Herring Sept. 18, 2020, 5:30 p.m. UTC | #1

On Thu, 17 Sep 2020 11:46:21 -0700, Matthias Kaehlcke wrote:
> Onboard USB hubs need to be powered and may require initiaization of
> other resources (like GPIOs or clocks) to work properly. This adds
> a device tree binding for these hubs.
> 
> Signed-off-by: Matthias Kaehlcke <[e-mail]>
> ---
> 
> Changes in v2:
> - removed 'wakeup-source' and 'power-off-in-suspend' properties
> - consistently use spaces for indentation in example
> 
>  .../bindings/usb/onboard_usb_hub.yaml         | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/usb/onboard_usb_hub.example.dts:24.9-20 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/usb/onboard_usb_hub.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1366: dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1366361

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

Patch

diff --git a/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
new file mode 100644
index 000000000000..66d67aa64e3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
@@ -0,0 +1,56 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/onboard_usb_hub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for onboard USB hubs
+
+maintainers:
+  - Matthias Kaehlcke <[e-mail]>
+
+allOf:
+  - $ref: /schemas/usb/onboard_usb_hub.yaml#
+
+properties:
+  compatible:
+    enum:
+      - onboard-usb-hub
+      - realtek,rts5411
+
+  vdd-supply:
+    description:
+      phandle to the regulator that provides power to the hub.
+
+required:
+  - compatible
+  - vdd-supply
+
+examples:
+  - |
+    usb_hub: usb-hub {
+        compatible = "realtek,rts5411", "onboard-usb-hub";
+        vdd-supply = <&pp3300_hub>;
+    };
+
+    &usb_1_dwc3 {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub@1 {
+            compatible = "usbbda,5411";
+            reg = <1>;
+            hub = <&usb_hub>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub@2 {
+            compatible = "usbbda,411";
+            reg = <2>;
+            hub = <&usb_hub>;
+        };
+    };
+
+...