From patchwork Thu Sep 24 09:00:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Amelie Delaunay X-Patchwork-Id: 11796639 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 1CED559D for ; Thu, 24 Sep 2020 09:01:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id F410923787 for ; Thu, 24 Sep 2020 09:01:19 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="NLPfCDt5" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727351AbgIXJBT (ORCPT ); Thu, 24 Sep 2020 05:01:19 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:13666 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727211AbgIXJBP (ORCPT ); Thu, 24 Sep 2020 05:01:15 -0400 Received: from pps.filterd (m0046660.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 08O8vg0u024428; Thu, 24 Sep 2020 11:01:02 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=STMicroelectronics; bh=oxvd4rChL3hL2/3RaqvA0YXKeUyrfWvcv0iFW/5fUzY=; b=NLPfCDt5dGuIyJIQvou+YZLMem9SI5s3sVa7oisXT4UOmPoiCkp3XIpq34z+L+yAYhIC 3SeYOtTe8doMupJ/WjgoD4fnaL1FJPo+XyLeULHlNUzn35rCIavperpzuI+MR9nxAw79 VgLzszyK8d4wGQeADqqqu32803dblq+B95MsiH1m2JMKow8ZyFZIl/5TezkKc6laqk/I O5HpE655PZTQgJc6dR4S2jv4A7OogrkkzjZiP46+Z8CATTrbvf307y0bfiLY0Qu6UK0m kzAeWAX7K28n85eIe53Tz34q5MsExYc5iYgKWmHjKsnMjhtXuzegjHQywLdX2YXN79cA eA== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 33n748cs6b-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 24 Sep 2020 11:01:02 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 129C810003A; Thu, 24 Sep 2020 11:01:02 +0200 (CEST) Received: from Webmail-eu.st.com (sfhdag3node2.st.com [10.75.127.8]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id E6C422A4D64; Thu, 24 Sep 2020 11:01:01 +0200 (CEST) Received: from localhost (10.75.127.45) by SFHDAG3NODE2.st.com (10.75.127.8) with Microsoft SMTP Server (TLS) id 15.0.1473.3; Thu, 24 Sep 2020 11:01:01 +0200 From: Amelie Delaunay To: Rob Herring , Greg Kroah-Hartman , Maxime Coquelin , Alexandre Torgue , Russell King , Heikki Krogerus CC: , , , , , Amelie Delaunay , Fabrice Gasnier Subject: [PATCH v3 5/6] ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx Date: Thu, 24 Sep 2020 11:00:48 +0200 Message-ID: <20200924090049.9041-6-amelie.delaunay@st.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200924090049.9041-1-amelie.delaunay@st.com> References: <20200924090049.9041-1-amelie.delaunay@st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.45] X-ClientProxiedBy: SFHDAG2NODE2.st.com (10.75.127.5) To SFHDAG3NODE2.st.com (10.75.127.8) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235,18.0.687 definitions=2020-09-24_05:2020-09-24,2020-09-24 signatures=0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org This patch adds support for STUSB1600 USB Type-C port controller, used on I2C4 on stm32mp15xx-dkx. The default configuration on this board, on Type-C connector, is: - Dual Power Role (DRP), so set power-role to "dual"; - Vbus limited to 500mA, so set power-opmode to "default" (it means 500mA in USB 2.0). power-opmode is used to reconfigure the STUSB1600 advertising of current capability when its NVM is not in line with the board layout. On stm32mp15xx-dkx, Vbus power source of STUSB1600 is 5V_VIN (so add the vin fixed 5V regulator too). So power operation mode depends on the power supply used. To avoid any power issues, it is better to limit Vbus to 500mA on this board. ALERT# is the interrupt pin of STUSB1600. It needs an external pull-up, and signal is active low. USB OTG controller ID and Vbus signals are not connected on stm32mp15xx-dkx boards, so disconnection are not detected. Without DWC2 usb-role-switch: - if you unplug the USB cable from the Type-C port, you have to manually disconnect the USB gadget: echo disconnect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect - Then you can plug the USB cable again in the Type-C port, and manually reconnect the USB gadget: echo connect > /sys/devices/platform/soc/49000000.usb-otg/udc/49000000.usb-otg/soft_connect With DWC2 usb-role-switch, USB gadget is dynamically disconnected or connected. Signed-off-by: Amelie Delaunay --- No changes in v3. No changes in v2. --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 7 +++++ arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 38 ++++++++++++++++++++++++ 2 files changed, 45 insertions(+) diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index b5a66429670c..fe782afaf010 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1573,6 +1573,13 @@ }; }; + stusb1600_pins_a: stusb1600-0 { + pins { + pinmux = ; + bias-pull-up; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index a5307745719a..589065223bf0 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -230,6 +238,30 @@ /delete-property/dmas; /delete-property/dma-names; + stusb1600@28 { + compatible = "st,stusb1600"; + reg = <0x28>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioi>; + pinctrl-names = "default"; + pinctrl-0 = <&stusb1600_pins_a>; + status = "okay"; + vdd-supply = <&vin>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + power-opmode = "default"; + + port { + con_usbotg_hs_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + pmic: stpmic@33 { compatible = "st,stpmic1"; reg = <0x33>; @@ -631,6 +663,12 @@ phy-names = "usb2-phy"; usb-role-switch; status = "okay"; + + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usbotg_hs_ep>; + }; + }; }; &usbphyc {