From patchwork Thu Oct 8 06:15:55 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Badhri Jagan Sridharan X-Patchwork-Id: 11822229 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 5DD7A13B2 for ; Thu, 8 Oct 2020 06:17:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 24792206BE for ; Thu, 8 Oct 2020 06:17:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=google.com header.i=@google.com header.b="JXlLTnib" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728930AbgJHGRH (ORCPT ); Thu, 8 Oct 2020 02:17:07 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36854 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728836AbgJHGQi (ORCPT ); Thu, 8 Oct 2020 02:16:38 -0400 Received: from mail-qt1-x849.google.com (mail-qt1-x849.google.com [IPv6:2607:f8b0:4864:20::849]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E2CFAC0613E5 for ; Wed, 7 Oct 2020 23:16:31 -0700 (PDT) Received: by mail-qt1-x849.google.com with SMTP id t40so3055498qtc.19 for ; Wed, 07 Oct 2020 23:16:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20161025; h=sender:date:in-reply-to:message-id:mime-version:references:subject :from:to:cc; bh=ebMLL3uQjmDQf27Z+hcIGJGbzI6/4R/tQRAYIq3vKl8=; b=JXlLTnib43C3WXIOzSQrHV561AgM1lwqnXeY5/6dTnyH5lU2iRoNASrDjXM7q2eJT0 r9W7B7J3LUhIGFhXq2dZzV8CPdDqDWy2EPcXr/YJosA8u4vNY/Gh6pwhtFxdjAXh30pF 5tAXsFTL2z1T8cektqJGJ2f52t3qQH/z5qyJ5NDDZuIQsQTfBs/9GMwkZL/03sX+PZaq XMzpUWfL+rdShCeLqA8xeN/Mw6raWUYBmUyjMKxk6cupBYZu/uYp/buPjBtJkB1FM1VT SX4yFT2zqMUEmnJcCwMvf+HIFUcNgthCtj7OVoNVN0fHCRP1E2DiAlYU3PLuVCUJJsIL 8TZA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:sender:date:in-reply-to:message-id:mime-version :references:subject:from:to:cc; bh=ebMLL3uQjmDQf27Z+hcIGJGbzI6/4R/tQRAYIq3vKl8=; b=PwGdkqSNRVhMMz0nrfK5c+HyeJIsTOWRy8Lj38KRjq3u4DWwAAz9hWXsxEA6FJrCse vnc9vINuDy+eOuZuZAxBpDp4cz3f8Y+DUs5kqLXA/QVUuMeD3papfI8qafIKjYcF/QpT auJxd/X5c07BygI3rPK8H//LH5Ta2wg3MahuJ8sOC0aSjBokCLXYQ7L4tJtEXtxGkkQy XwDZIfw+8J2RnLGovkFz2poosvOJYAWwpxLXFtdmMKx0MUeEWapRZXefYw3PcvUUOtrs 73zvtJFPqvEAig7VU1XJhZCPPbDX9T1QWMM7QTMifCbcI/jNy2FS0gSAYVbGXLDdXTHm XJDQ== X-Gm-Message-State: AOAM532jPIXU7I8c+5tdOd4VPjl9yZ9qLaQqZDx1NjKjV8NM/N+Vqi+Q eENRpxUCecOCdnXm9C+7q8ECl22ZJsw= X-Google-Smtp-Source: ABdhPJwNmYJzXx8mim9diJUMMT/spOt5aVujkZBCx8HuI9Q5zNK1iPsbj0QG1HN4Aw/25UdMR0OWRmhfDWc= Sender: "badhri via sendgmr" X-Received: from badhri.mtv.corp.google.com ([2620:15c:211:1:f292:1cff:fee0:66cf]) (user=badhri job=sendgmr) by 2002:ad4:458d:: with SMTP id x13mr6927461qvu.4.1602137791024; Wed, 07 Oct 2020 23:16:31 -0700 (PDT) Date: Wed, 7 Oct 2020 23:15:55 -0700 In-Reply-To: <20201008061556.1402293-1-badhri@google.com> Message-Id: <20201008061556.1402293-15-badhri@google.com> Mime-Version: 1.0 References: <20201008061556.1402293-1-badhri@google.com> X-Mailer: git-send-email 2.28.0.806.g8561365e88-goog Subject: [PATCH v10 14/15] usb: typec: tcpci: Implement Auto discharge disconnect callbacks From: Badhri Jagan Sridharan To: Guenter Roeck , Heikki Krogerus , Greg Kroah-Hartman , Rob Herring , Lee Jones , Mark Brown , Maxime Ripard , Alexandre Belloni , Thierry Reding , Prashant Malani , Badhri Jagan Sridharan Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, Amelie Delaunay Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org vImplement callbacks for enabling/disabling POWER_CONTROL.AutoDischargeDisconnect. Programs VBUS_SINK_DISCONNECT_THRESHOLD based on the voltage requested as sink, mode of operation. The programmed threshold is based on vSinkDisconnect and vSinkDisconnectPD values. Add auto_discharge_disconnect to tdata to allow TCPC chip level drivers enable AutoDischargeDisconnect. Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus --- Changes since v1: - Changing patch version to v6 to fix version number confusion. Changes since v6: - Rebase on usb-next. Changes since v7: Heikki's suggestion: - Moved the actual write to TCPC_VBUS_SINK_DISCONNECT_THRESH as it's common to all chip drivers. - Renaming the tcpci_data callback as get_auto_vbus_discharge_threshold Changes since v8: - Removed get_auto_vbus_discharge_threshold callback and moved the logic to program the default threshold for TCPC_VBUS_SINK_DISCONNECT_THRESH into the TCPCI code. Changes since v9: - none --- drivers/usb/typec/tcpm/tcpci.c | 63 +++++++++++++++++++++++++++++++++- drivers/usb/typec/tcpm/tcpci.h | 14 ++++++-- 2 files changed, 74 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index f91688e43991..12d983a75510 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -18,7 +18,10 @@ #include "tcpci.h" -#define PD_RETRY_COUNT 3 +#define PD_RETRY_COUNT 3 +#define AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV 3500 +#define AUTO_DISCHARGE_PD_HEADROOM_MV 850 +#define AUTO_DISCHARGE_PPS_HEADROOM_MV 1250 struct tcpci { struct device *dev; @@ -268,6 +271,58 @@ static int tcpci_set_vconn(struct tcpc_dev *tcpc, bool enable) enable ? TCPC_POWER_CTRL_VCONN_ENABLE : 0); } +static int tcpci_enable_auto_vbus_discharge(struct tcpc_dev *dev, bool enable) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + int ret; + + ret = regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_AUTO_DISCHARGE, + enable ? TCPC_POWER_CTRL_AUTO_DISCHARGE : 0); + return ret; +} + +static int tcpci_set_auto_vbus_discharge_threshold(struct tcpc_dev *dev, enum typec_pwr_opmode mode, + bool pps_active, u32 requested_vbus_voltage_mv) +{ + struct tcpci *tcpci = tcpc_to_tcpci(dev); + unsigned int pwr_ctrl, threshold = 0; + int ret; + + /* + * Indicates that vbus is going to go away due PR_SWAP, hard reset etc. + * Do not discharge vbus here. + */ + if (requested_vbus_voltage_mv == 0) + goto write_thresh; + + ret = regmap_read(tcpci->regmap, TCPC_POWER_CTRL, &pwr_ctrl); + if (ret < 0) + return ret; + + if (pwr_ctrl & TCPC_FAST_ROLE_SWAP_EN) { + /* To prevent disconnect when the source is fast role swap is capable. */ + threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV; + } else if (mode == TYPEC_PWR_MODE_PD) { + if (pps_active) + threshold = (95 * requested_vbus_voltage_mv / 100) - + AUTO_DISCHARGE_PD_HEADROOM_MV; + else + threshold = (95 * requested_vbus_voltage_mv / 100) - + AUTO_DISCHARGE_PPS_HEADROOM_MV; + } else { + /* 3.5V for non-pd sink */ + threshold = AUTO_DISCHARGE_DEFAULT_THRESHOLD_MV; + } + + threshold = threshold / TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB_MV; + + if (threshold > TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX) + return -EINVAL; + +write_thresh: + return tcpci_write16(tcpci, TCPC_VBUS_SINK_DISCONNECT_THRESH, threshold); +} + static int tcpci_enable_frs(struct tcpc_dev *dev, bool enable) { struct tcpci *tcpci = tcpc_to_tcpci(dev); @@ -638,6 +693,12 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_frs = tcpci_enable_frs; tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus; + if (tcpci->data->auto_discharge_disconnect) { + tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge; + tcpci->tcpc.set_auto_vbus_discharge_threshold = + tcpci_set_auto_vbus_discharge_threshold; + } + err = tcpci_parse_config(tcpci); if (err < 0) return ERR_PTR(err); diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h index b418fe11b527..3fe313655f0c 100644 --- a/drivers/usb/typec/tcpm/tcpci.h +++ b/drivers/usb/typec/tcpm/tcpci.h @@ -8,6 +8,8 @@ #ifndef __LINUX_USB_TCPCI_H #define __LINUX_USB_TCPCI_H +#include + #define TCPC_VENDOR_ID 0x0 #define TCPC_PRODUCT_ID 0x2 #define TCPC_BCD_DEV 0x4 @@ -67,6 +69,7 @@ #define TCPC_POWER_CTRL 0x1c #define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0) +#define TCPC_POWER_CTRL_AUTO_DISCHARGE BIT(4) #define TCPC_FAST_ROLE_SWAP_EN BIT(7) #define TCPC_CC_STATUS 0x1d @@ -133,6 +136,8 @@ #define TCPC_VBUS_VOLTAGE 0x70 #define TCPC_VBUS_SINK_DISCONNECT_THRESH 0x72 +#define TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB_MV 25 +#define TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX 0x3ff #define TCPC_VBUS_STOP_DISCHARGE_THRESH 0x74 #define TCPC_VBUS_VOLTAGE_ALARM_HI_CFG 0x76 #define TCPC_VBUS_VOLTAGE_ALARM_LO_CFG 0x78 @@ -140,17 +145,22 @@ /* I2C_WRITE_BYTE_COUNT + 1 when TX_BUF_BYTE_x is only accessible I2C_WRITE_BYTE_COUNT */ #define TCPC_TRANSMIT_BUFFER_MAX_LEN 31 +struct tcpci; + /* - * @TX_BUF_BYTE_x_hidden + * @TX_BUF_BYTE_x_hidden: * optional; Set when TX_BUF_BYTE_x can only be accessed through I2C_WRITE_BYTE_COUNT. * @frs_sourcing_vbus: * Optional; Callback to perform chip specific operations when FRS * is sourcing vbus. + * @auto_discharge_disconnect: + * Optional; Enables TCPC to autonously discharge vbus on disconnect. */ -struct tcpci; struct tcpci_data { struct regmap *regmap; unsigned char TX_BUF_BYTE_x_hidden:1; + unsigned char auto_discharge_disconnect:1; + int (*init)(struct tcpci *tcpci, struct tcpci_data *data); int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data, bool enable);