From patchwork Sat Oct 10 22:23:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11830411 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id C4074109B for ; Sat, 10 Oct 2020 22:58:29 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id B5C462067C for ; Sat, 10 Oct 2020 22:58:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390721AbgJJW62 (ORCPT ); Sat, 10 Oct 2020 18:58:28 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:57338 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1732494AbgJJWdM (ORCPT ); Sat, 10 Oct 2020 18:33:12 -0400 X-Greylist: delayed 463 seconds by postgrey-1.27 at vger.kernel.org; Sat, 10 Oct 2020 18:33:08 EDT Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id C0F7D8030833; Sat, 10 Oct 2020 22:23:56 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id SvYALCWbsivP; Sun, 11 Oct 2020 01:23:56 +0300 (MSK) From: Serge Semin To: Felipe Balbi , Greg Kroah-Hartman , Felipe Balbi , David Cohen , Heikki Krogerus CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , , Subject: [PATCH 3/3] usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression Date: Sun, 11 Oct 2020 01:23:51 +0300 Message-ID: <20201010222351.7323-4-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20201010222351.7323-1-Sergey.Semin@baikalelectronics.ru> References: <20201010222351.7323-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org First of all the commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") introduced the Suspend USB2.0 HS/FS/LS PHY regression, as by design of the fix any attempt to read/write from/to the PHY control registers will completely disable the PHY suspension, which consequently will increase the USB bus power consumption. Secondly the fix won't work well for the very first attempt of the ULPI PHY control registers IO, because after disabling the USB2.0 PHY suspension functionality it will still take some time for the bus to resume from the sleep state if one has been reached before it. So the very first PHY register read/write operation will take more time than the busy-loop provides and the IO timeout error might be returned anyway. Here we suggest to fix the denoted problems in the following way. First of all let's not disable the Suspend USB2.0 HS/FS/LS PHY functionality so to make the controller and the USB2.0 bus more power efficient. Secondly instead of that we'll extend the PHY IO op wait procedure with 1 - 1.2 ms sleep if the PHY suspension is enabled (1ms should be enough as by LPM specification it is at most how long it takes for the USB2.0 bus to resume from L1 (Sleep) state). Finally in case if the USB2.0 PHY suspension functionality has been disabled on the DWC USB3 controller setup procedure we'll compensate the USB bus resume process latency by extending the busy-loop attempts counter. Fixes: e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") Signed-off-by: Serge Semin --- drivers/usb/dwc3/ulpi.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index 0dbc826355a5..f23f4c9a557e 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -24,7 +24,7 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read) { unsigned long ns = 5L * DWC3_ULPI_BASE_DELAY; - unsigned count = 1000; + unsigned int count = 10000; u32 reg; if (addr >= ULPI_EXT_VENDOR_SPECIFIC) @@ -33,6 +33,10 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc, u8 addr, bool read) if (read) ns += DWC3_ULPI_BASE_DELAY; + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + if (reg & DWC3_GUSB2PHYCFG_SUSPHY) + usleep_range(1000, 1200); + while (count--) { ndelay(ns); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0)); @@ -50,12 +54,6 @@ static int dwc3_ulpi_read(struct device *dev, u8 addr) u32 reg; int ret; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg); @@ -73,12 +71,6 @@ static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val) struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (reg & DWC3_GUSB2PHYCFG_SUSPHY) { - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); - } - reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); reg |= DWC3_GUSB2PHYACC_WRITE | val; dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);