| Message ID | 20201010224121.12672-2-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema | expand |
On Sun, Oct 11, 2020 at 01:41:04AM +0300, Serge Semin wrote: > The generic USB HCD properties have been described in the legacy bindings > text file: Documentation/devicetree/bindings/usb/generic.txt . Let's > convert it' content into the USB HCD DT schema properties so all USB DT > nodes would be validated to have them properly utilized. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > --- > .../devicetree/bindings/usb/generic.txt | 57 ------------- > .../devicetree/bindings/usb/usb-hcd.yaml | 84 +++++++++++++++++++ > 2 files changed, 84 insertions(+), 57 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt > > diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt > deleted file mode 100644 > index ba472e7aefc9..000000000000 > --- a/Documentation/devicetree/bindings/usb/generic.txt > +++ /dev/null > @@ -1,57 +0,0 @@ > -Generic USB Properties > - > -Optional properties: > - - maximum-speed: tells USB controllers we want to work up to a certain > - speed. Valid arguments are "super-speed-plus", > - "super-speed", "high-speed", "full-speed" and > - "low-speed". In case this isn't passed via DT, USB > - controllers should default to their maximum HW > - capability. > - - dr_mode: tells Dual-Role USB controllers that we want to work on a > - particular mode. Valid arguments are "host", > - "peripheral" and "otg". In case this attribute isn't > - passed via DT, USB DRD controllers should default to > - OTG. > - - phy_type: tells USB controllers that we want to configure the core to support > - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is > - selected. Valid arguments are "utmi" and "utmi_wide". > - In case this isn't passed via DT, USB controllers should > - default to HW capability. > - - otg-rev: tells usb driver the release number of the OTG and EH supplement > - with which the device and its descriptors are compliant, > - in binary-coded decimal (i.e. 2.0 is 0200H). This > - property is used if any real OTG features(HNP/SRP/ADP) > - is enabled, if ADP is required, otg-rev should be > - 0x0200 or above. > - - companion: phandle of a companion > - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP > - is the basic function of real OTG except you want it > - to be a srp-capable only B device. > - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is > - optional for OTG device. > - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is > - optional for OTG device. > - - usb-role-switch: boolean, indicates that the device is capable of assigning > - the USB data role (USB host or USB device) for a given > - USB connector, such as Type-C, Type-B(micro). > - see connector/usb-connector.yaml. > - - role-switch-default-mode: indicating if usb-role-switch is enabled, the > - device default operation mode of controller while usb > - role is USB_ROLE_NONE. Valid arguments are "host" and > - "peripheral". Defaults to "peripheral" if not > - specified. > - > - > -This is an attribute to a USB controller such as: > - > -dwc3@4a030000 { > - compatible = "synopsys,dwc3"; > - reg = <0x4a030000 0xcfff>; > - interrupts = <0 92 4> > - usb-phy = <&usb2_phy>, <&usb3,phy>; > - maximum-speed = "super-speed"; > - dr_mode = "otg"; > - phy_type = "utmi_wide"; > - otg-rev = <0x0200>; > - adp-disable; > -}; > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > index 7263b7f2b510..815de24127db 100644 > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > @@ -22,9 +22,93 @@ properties: > description: > Name specifier for the USB PHY > > + maximum-speed: > + description: | Drop the '|' if there's no formatting to preserve. > + Tells USB controllers we want to work up to a certain speed. In case this > + isn't passed via DT, USB controllers should default to their maximum HW > + capability. > + $ref: /schemas/types.yaml#/definitions/string > + enum: ["low-speed", "full-speed", "high-speed", "super-speed", > + "super-speed-plus"] One per line and drop the quotes. > + > + dr_mode: > + description: | > + Tells Dual-Role USB controllers that we want to work on a particular > + mode. In case this attribute isn't passed via DT, USB DRD controllers > + should default to OTG. > + $ref: /schemas/types.yaml#/definitions/string > + enum: ["host", "peripheral", "otg"] > + > + phy_type: > + description: | > + Tells USB controllers that we want to configure the core to support a > + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case > + this isn't passed via DT, USB controllers should default to HW > + capability. > + $ref: /schemas/types.yaml#/definitions/string > + enum: ["utmi", "utmi_wide"] > + > + otg-rev: > + description: | > + Tells usb driver the release number of the OTG and EH supplement with > + which the device and its descriptors are compliant, in binary-coded > + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG > + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be > + 0x0200 or above. > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + companion: > + description: Phandle of a companion device > + $ref: /schemas/types.yaml#/definitions/phandle > + > + hnp-disable: > + description: | > + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the > + basic function of real OTG except you want it to be a srp-capable only B > + device. > + type: boolean > + > + srp-disable: > + description: | > + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG > + device. > + type: boolean > + > + adp-disable: > + description: | > + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG > + device. > + type: boolean > + > + usb-role-switch: > + description: | > + Indicates that the device is capable of assigning the USB data role > + (USB host or USB device) for a given USB connector, such as Type-C, > + Type-B(micro). See connector/usb-connector.yaml. > + > + role-switch-default-mode: > + description: | > + Indicates if usb-role-switch is enabled, the device default operation > + mode of controller while usb role is USB_ROLE_NONE. > + $ref: /schemas/types.yaml#/definitions/string > + enum: ["host", "peripheral"] > + default: "peripheral" > + > examples: > - | > usb { > phys = <&usb2_phy1>, <&usb3_phy1>; > phy-names = "usb"; > }; > + - | > + usb@4a030000 { > + compatible = "snps,dwc3"; > + reg = <0x4a030000 0xcfff>; > + interrupts = <0 92 4>; > + usb-phy = <&usb2_phy>, <&usb3_phy>; > + maximum-speed = "super-speed"; > + dr_mode = "otg"; > + phy_type = "utmi_wide"; > + otg-rev = <0x0200>; > + adp-disable; > + }; > -- > 2.27.0 >
On Tue, Oct 13, 2020 at 07:14:41AM -0500, Rob Herring wrote: > On Sun, Oct 11, 2020 at 01:41:04AM +0300, Serge Semin wrote: > > The generic USB HCD properties have been described in the legacy bindings > > text file: Documentation/devicetree/bindings/usb/generic.txt . Let's > > convert it' content into the USB HCD DT schema properties so all USB DT > > nodes would be validated to have them properly utilized. > > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > > --- > > .../devicetree/bindings/usb/generic.txt | 57 ------------- > > .../devicetree/bindings/usb/usb-hcd.yaml | 84 +++++++++++++++++++ > > 2 files changed, 84 insertions(+), 57 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt > > > > diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt > > deleted file mode 100644 > > index ba472e7aefc9..000000000000 > > --- a/Documentation/devicetree/bindings/usb/generic.txt > > +++ /dev/null > > @@ -1,57 +0,0 @@ > > -Generic USB Properties > > - > > -Optional properties: > > - - maximum-speed: tells USB controllers we want to work up to a certain > > - speed. Valid arguments are "super-speed-plus", > > - "super-speed", "high-speed", "full-speed" and > > - "low-speed". In case this isn't passed via DT, USB > > - controllers should default to their maximum HW > > - capability. > > - - dr_mode: tells Dual-Role USB controllers that we want to work on a > > - particular mode. Valid arguments are "host", > > - "peripheral" and "otg". In case this attribute isn't > > - passed via DT, USB DRD controllers should default to > > - OTG. > > - - phy_type: tells USB controllers that we want to configure the core to support > > - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is > > - selected. Valid arguments are "utmi" and "utmi_wide". > > - In case this isn't passed via DT, USB controllers should > > - default to HW capability. > > - - otg-rev: tells usb driver the release number of the OTG and EH supplement > > - with which the device and its descriptors are compliant, > > - in binary-coded decimal (i.e. 2.0 is 0200H). This > > - property is used if any real OTG features(HNP/SRP/ADP) > > - is enabled, if ADP is required, otg-rev should be > > - 0x0200 or above. > > - - companion: phandle of a companion > > - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP > > - is the basic function of real OTG except you want it > > - to be a srp-capable only B device. > > - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is > > - optional for OTG device. > > - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is > > - optional for OTG device. > > - - usb-role-switch: boolean, indicates that the device is capable of assigning > > - the USB data role (USB host or USB device) for a given > > - USB connector, such as Type-C, Type-B(micro). > > - see connector/usb-connector.yaml. > > - - role-switch-default-mode: indicating if usb-role-switch is enabled, the > > - device default operation mode of controller while usb > > - role is USB_ROLE_NONE. Valid arguments are "host" and > > - "peripheral". Defaults to "peripheral" if not > > - specified. > > - > > - > > -This is an attribute to a USB controller such as: > > - > > -dwc3@4a030000 { > > - compatible = "synopsys,dwc3"; > > - reg = <0x4a030000 0xcfff>; > > - interrupts = <0 92 4> > > - usb-phy = <&usb2_phy>, <&usb3,phy>; > > - maximum-speed = "super-speed"; > > - dr_mode = "otg"; > > - phy_type = "utmi_wide"; > > - otg-rev = <0x0200>; > > - adp-disable; > > -}; > > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > index 7263b7f2b510..815de24127db 100644 > > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > > @@ -22,9 +22,93 @@ properties: > > description: > > Name specifier for the USB PHY > > > > + maximum-speed: > > + description: | > > Drop the '|' if there's no formatting to preserve. Thanks for noticing this. I should have refreshed my YAML multi-line knowledge https://yaml-multiline.info/ .) I'll fix it in all the patches of the series. > > > + Tells USB controllers we want to work up to a certain speed. In case this > > + isn't passed via DT, USB controllers should default to their maximum HW > > + capability. > > + $ref: /schemas/types.yaml#/definitions/string > > + enum: ["low-speed", "full-speed", "high-speed", "super-speed", > > + "super-speed-plus"] > > One per line and drop the quotes. Ok. -Sergey > > > + > > + dr_mode: > > + description: | > > + Tells Dual-Role USB controllers that we want to work on a particular > > + mode. In case this attribute isn't passed via DT, USB DRD controllers > > + should default to OTG. > > + $ref: /schemas/types.yaml#/definitions/string > > + enum: ["host", "peripheral", "otg"] > > + > > + phy_type: > > + description: | > > + Tells USB controllers that we want to configure the core to support a > > + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case > > + this isn't passed via DT, USB controllers should default to HW > > + capability. > > + $ref: /schemas/types.yaml#/definitions/string > > + enum: ["utmi", "utmi_wide"] > > + > > + otg-rev: > > + description: | > > + Tells usb driver the release number of the OTG and EH supplement with > > + which the device and its descriptors are compliant, in binary-coded > > + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG > > + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be > > + 0x0200 or above. > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + > > + companion: > > + description: Phandle of a companion device > > + $ref: /schemas/types.yaml#/definitions/phandle > > + > > + hnp-disable: > > + description: | > > + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the > > + basic function of real OTG except you want it to be a srp-capable only B > > + device. > > + type: boolean > > + > > + srp-disable: > > + description: | > > + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG > > + device. > > + type: boolean > > + > > + adp-disable: > > + description: | > > + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG > > + device. > > + type: boolean > > + > > + usb-role-switch: > > + description: | > > + Indicates that the device is capable of assigning the USB data role > > + (USB host or USB device) for a given USB connector, such as Type-C, > > + Type-B(micro). See connector/usb-connector.yaml. > > + > > + role-switch-default-mode: > > + description: | > > + Indicates if usb-role-switch is enabled, the device default operation > > + mode of controller while usb role is USB_ROLE_NONE. > > + $ref: /schemas/types.yaml#/definitions/string > > + enum: ["host", "peripheral"] > > + default: "peripheral" > > + > > examples: > > - | > > usb { > > phys = <&usb2_phy1>, <&usb3_phy1>; > > phy-names = "usb"; > > }; > > + - | > > + usb@4a030000 { > > + compatible = "snps,dwc3"; > > + reg = <0x4a030000 0xcfff>; > > + interrupts = <0 92 4>; > > + usb-phy = <&usb2_phy>, <&usb3_phy>; > > + maximum-speed = "super-speed"; > > + dr_mode = "otg"; > > + phy_type = "utmi_wide"; > > + otg-rev = <0x0200>; > > + adp-disable; > > + }; > > -- > > 2.27.0 > >
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt deleted file mode 100644 index ba472e7aefc9..000000000000 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ /dev/null @@ -1,57 +0,0 @@ -Generic USB Properties - -Optional properties: - - maximum-speed: tells USB controllers we want to work up to a certain - speed. Valid arguments are "super-speed-plus", - "super-speed", "high-speed", "full-speed" and - "low-speed". In case this isn't passed via DT, USB - controllers should default to their maximum HW - capability. - - dr_mode: tells Dual-Role USB controllers that we want to work on a - particular mode. Valid arguments are "host", - "peripheral" and "otg". In case this attribute isn't - passed via DT, USB DRD controllers should default to - OTG. - - phy_type: tells USB controllers that we want to configure the core to support - a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is - selected. Valid arguments are "utmi" and "utmi_wide". - In case this isn't passed via DT, USB controllers should - default to HW capability. - - otg-rev: tells usb driver the release number of the OTG and EH supplement - with which the device and its descriptors are compliant, - in binary-coded decimal (i.e. 2.0 is 0200H). This - property is used if any real OTG features(HNP/SRP/ADP) - is enabled, if ADP is required, otg-rev should be - 0x0200 or above. - - companion: phandle of a companion - - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP - is the basic function of real OTG except you want it - to be a srp-capable only B device. - - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is - optional for OTG device. - - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is - optional for OTG device. - - usb-role-switch: boolean, indicates that the device is capable of assigning - the USB data role (USB host or USB device) for a given - USB connector, such as Type-C, Type-B(micro). - see connector/usb-connector.yaml. - - role-switch-default-mode: indicating if usb-role-switch is enabled, the - device default operation mode of controller while usb - role is USB_ROLE_NONE. Valid arguments are "host" and - "peripheral". Defaults to "peripheral" if not - specified. - - -This is an attribute to a USB controller such as: - -dwc3@4a030000 { - compatible = "synopsys,dwc3"; - reg = <0x4a030000 0xcfff>; - interrupts = <0 92 4> - usb-phy = <&usb2_phy>, <&usb3,phy>; - maximum-speed = "super-speed"; - dr_mode = "otg"; - phy_type = "utmi_wide"; - otg-rev = <0x0200>; - adp-disable; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..815de24127db 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,9 +22,93 @@ properties: description: Name specifier for the USB PHY + maximum-speed: + description: | + Tells USB controllers we want to work up to a certain speed. In case this + isn't passed via DT, USB controllers should default to their maximum HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: ["low-speed", "full-speed", "high-speed", "super-speed", + "super-speed-plus"] + + dr_mode: + description: | + Tells Dual-Role USB controllers that we want to work on a particular + mode. In case this attribute isn't passed via DT, USB DRD controllers + should default to OTG. + $ref: /schemas/types.yaml#/definitions/string + enum: ["host", "peripheral", "otg"] + + phy_type: + description: | + Tells USB controllers that we want to configure the core to support a + UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is selected. In case + this isn't passed via DT, USB controllers should default to HW + capability. + $ref: /schemas/types.yaml#/definitions/string + enum: ["utmi", "utmi_wide"] + + otg-rev: + description: | + Tells usb driver the release number of the OTG and EH supplement with + which the device and its descriptors are compliant, in binary-coded + decimal (i.e. 2.0 is 0200H). This property is used if any real OTG + features (HNP/SRP/ADP) is enabled. If ADP is required, otg-rev should be + 0x0200 or above. + $ref: /schemas/types.yaml#/definitions/uint32 + + companion: + description: Phandle of a companion device + $ref: /schemas/types.yaml#/definitions/phandle + + hnp-disable: + description: | + Tells OTG controllers we want to disable OTG HNP. Normally HNP is the + basic function of real OTG except you want it to be a srp-capable only B + device. + type: boolean + + srp-disable: + description: | + Tells OTG controllers we want to disable OTG SRP. SRP is optional for OTG + device. + type: boolean + + adp-disable: + description: | + Tells OTG controllers we want to disable OTG ADP. ADP is optional for OTG + device. + type: boolean + + usb-role-switch: + description: | + Indicates that the device is capable of assigning the USB data role + (USB host or USB device) for a given USB connector, such as Type-C, + Type-B(micro). See connector/usb-connector.yaml. + + role-switch-default-mode: + description: | + Indicates if usb-role-switch is enabled, the device default operation + mode of controller while usb role is USB_ROLE_NONE. + $ref: /schemas/types.yaml#/definitions/string + enum: ["host", "peripheral"] + default: "peripheral" + examples: - | usb { phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb"; }; + - | + usb@4a030000 { + compatible = "snps,dwc3"; + reg = <0x4a030000 0xcfff>; + interrupts = <0 92 4>; + usb-phy = <&usb2_phy>, <&usb3_phy>; + maximum-speed = "super-speed"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + otg-rev = <0x0200>; + adp-disable; + };
The generic USB HCD properties have been described in the legacy bindings text file: Documentation/devicetree/bindings/usb/generic.txt . Let's convert it' content into the USB HCD DT schema properties so all USB DT nodes would be validated to have them properly utilized. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- .../devicetree/bindings/usb/generic.txt | 57 ------------- .../devicetree/bindings/usb/usb-hcd.yaml | 84 +++++++++++++++++++ 2 files changed, 84 insertions(+), 57 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/generic.txt