| Message ID | 20201023131503.759671-1-Sandeep.Singh@amd.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 2a632815683d2d34df52b701a36fe5ac6654e719 |
| Headers | show |
| Series | [v2] usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC | expand |
On 23.10.2020 16.15, Sandeep Singh wrote: > From: Sandeep Singh <sandeep.singh@amd.com> > > On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, > need to disable a bit which is enable in sparse controller. > > Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> > Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> > --- > Changes since v1:(https://lkml.org/lkml/2020/10/23/368) > -> Add xhci.h changes > Added to queue. This looks like it should go to stable as well. -Mathias
On 10/26/2020 8:16 PM, Mathias Nyman wrote: > [CAUTION: External Email] > > On 23.10.2020 16.15, Sandeep Singh wrote: >> From: Sandeep Singh <sandeep.singh@amd.com> >> >> On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, >> need to disable a bit which is enable in sparse controller. >> >> Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> >> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> >> --- >> Changes since v1:(https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2Flkml%2F2020%2F10%2F23%2F368&data=04%7C01%7CSandeep.Singh%40amd.com%7Ca8900bc99ca441507cc408d879bdc5e9%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637393203258053573%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=GM7TXOawh6nLZaX1ABZLlptYeyoUSMHnwhCxbY6zFZI%3D&reserved=0) >> -> Add xhci.h changes >> > Added to queue. > This looks like it should go to stable as well. Thanks Mathias , please help to queue this up from 4.19+. Regards Sandeep > > -Mathias
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c26c06e5c88c..bf89172c43ca 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -23,6 +23,8 @@ #define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) +#define SPARSE_DISABLE_BIT 17 +#define SPARSE_CNTL_ENABLE 0xC12C /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 @@ -161,6 +163,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == 0x15e0 || pdev->device == 0x15e1)) xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; + if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) + xhci->quirks |= XHCI_DISABLE_SPARSE; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH; @@ -498,6 +503,15 @@ static void xhci_pme_quirk(struct usb_hcd *hcd) readl(reg); } +static void xhci_sparse_control_quirk(struct usb_hcd *hcd) +{ + u32 reg; + + reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); + reg &= ~BIT(SPARSE_DISABLE_BIT); + writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); +} + static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -517,6 +531,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, true); + if (xhci->quirks & XHCI_DISABLE_SPARSE) + xhci_sparse_control_quirk(hcd); + ret = xhci_suspend(xhci, do_wakeup); if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) xhci_ssic_port_unused_quirk(hcd, false); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8be88379c0fb..ebb359ebb261 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1877,6 +1877,7 @@ struct xhci_hcd { #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) #define XHCI_RENESAS_FW_QUIRK BIT_ULL(36) #define XHCI_SKIP_PHY_INIT BIT_ULL(37) +#define XHCI_DISABLE_SPARSE BIT_ULL(38) unsigned int num_active_eps; unsigned int limit_active_eps;