@@ -98,6 +98,42 @@ static const struct usb_device_id id_table_fake_xircom[] = {
};
#endif
+static int keyspan_pda_get_write_room(struct keyspan_pda_private *priv)
+{
+ struct usb_serial_port *port = priv->port;
+ struct usb_serial *serial = priv->serial;
+ u8 *room;
+ int rc;
+
+ room = kmalloc(1, GFP_KERNEL);
+ if (!room)
+ return -ENOMEM;
+
+ rc = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 6, /* write_room */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE
+ | USB_DIR_IN,
+ 0, /* value: 0 means "remaining room" */
+ 0, /* index */
+ room,
+ 1,
+ 2000);
+ if (rc != 1) {
+ if (rc >= 0)
+ rc = -EIO;
+ dev_dbg(&port->dev, "roomquery failed: %d\n", rc);
+ goto out_free;
+ }
+
+ dev_dbg(&port->dev, "roomquery says %d\n", *room);
+ rc = *room;
+out_free:
+ kfree(room);
+
+ return rc;
+}
+
static void keyspan_pda_request_unthrottle(struct work_struct *work)
{
struct keyspan_pda_private *priv =
@@ -436,7 +472,6 @@ static int keyspan_pda_tiocmset(struct tty_struct *tty,
static int keyspan_pda_write(struct tty_struct *tty,
struct usb_serial_port *port, const unsigned char *buf, int count)
{
- struct usb_serial *serial = port->serial;
int request_unthrottle = 0;
int rc = 0;
struct keyspan_pda_private *priv;
@@ -479,38 +514,11 @@ static int keyspan_pda_write(struct tty_struct *tty,
device how much room it really has. This is done only on
scheduler time, since usb_control_msg() sleeps. */
if (count > priv->tx_room && !in_interrupt()) {
- u8 *room;
-
- room = kmalloc(1, GFP_KERNEL);
- if (!room) {
- rc = -ENOMEM;
+ rc = keyspan_pda_get_write_room(priv);
+ if (rc < 0)
goto exit;
- }
- rc = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value: 0 means "remaining room" */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc > 0) {
- dev_dbg(&port->dev, "roomquery says %d\n", *room);
- priv->tx_room = *room;
- }
- kfree(room);
- if (rc < 0) {
- dev_dbg(&port->dev, "roomquery failed\n");
- goto exit;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "roomquery returned 0 bytes\n");
- rc = -EIO; /* device didn't return any data */
- goto exit;
- }
+ priv->tx_room = rc;
}
if (count >= priv->tx_room) {
@@ -614,48 +622,27 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
- struct usb_serial *serial = port->serial;
- u8 *room;
- int rc = 0;
- struct keyspan_pda_private *priv;
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+ int rc;
/* find out how much room is in the Tx ring */
- room = kmalloc(1, GFP_KERNEL);
- if (!room)
- return -ENOMEM;
+ rc = keyspan_pda_get_write_room(priv);
+ if (rc < 0)
+ return rc;
- rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc < 0) {
- dev_dbg(&port->dev, "%s - roomquery failed\n", __func__);
- goto error;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__);
- rc = -EIO;
- goto error;
- }
- priv = usb_get_serial_port_data(port);
- priv->tx_room = *room;
- priv->tx_throttled = *room ? 0 : 1;
+ priv->tx_room = rc;
+ priv->tx_throttled = rc ? 0 : 1;
/*Start reading from the device*/
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (rc) {
dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
- goto error;
+ return rc;
}
-error:
- kfree(room);
- return rc;
+
+ return 0;
}
+
static void keyspan_pda_close(struct usb_serial_port *port)
{
struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
Add helper to retrieve the available device transfer-buffer space. Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/keyspan_pda.c | 113 ++++++++++++++----------------- 1 file changed, 50 insertions(+), 63 deletions(-)