| Message ID | 20201031101144.45164-1-zhangqilong3@huawei.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property | expand |
On Sat, Oct 31, 2020 at 06:11:44PM +0800, Zhang Qilong wrote: > pm_runtime_get_sync() will increment pm usage at first and it > will resume the device later. If runtime of the device is > active or has error(else....), resume operation will fail. If > we do not call put operation to decrease the reference, the > result is that this device cannot enter the idle state and > always stay busy or other non-idle state. > > Fixes: 249fa8217b846 ("USB: Add driver to control USB fast charge for iOS devices") > Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> > --- > drivers/usb/misc/apple-mfi-fastcharge.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) What changed from v1? Always put that below the --- line. Can you fix that up and send a v3? thanks, greg k-h
On Sat, Oct 31, 2020 at 06:11:44PM +0800, Zhang Qilong wrote: > pm_runtime_get_sync() will increment pm usage at first and it > will resume the device later. If runtime of the device is > active or has error(else....), resume operation will fail. That's not a correct description; pm_runtime_get_sync() returns positive if the device was already active and that's not a failure (there's nothing to resume). Please fix up when resending. > If > we do not call put operation to decrease the reference, the > result is that this device cannot enter the idle state and > always stay busy or other non-idle state. > > Fixes: 249fa8217b846 ("USB: Add driver to control USB fast charge for iOS devices") > Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> > --- > drivers/usb/misc/apple-mfi-fastcharge.c | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/misc/apple-mfi-fastcharge.c b/drivers/usb/misc/apple-mfi-fastcharge.c > index b403094a6b3a..9e1ad4536e36 100644 > --- a/drivers/usb/misc/apple-mfi-fastcharge.c > +++ b/drivers/usb/misc/apple-mfi-fastcharge.c > @@ -120,8 +120,10 @@ static int apple_mfi_fc_set_property(struct power_supply *psy, > dev_dbg(&mfi->udev->dev, "prop: %d\n", psp); > > ret = pm_runtime_get_sync(&mfi->udev->dev); > - if (ret < 0) > + if (ret < 0) { > + pm_runtime_put_noidle(&mfi->udev->dev); > return ret; > + } > > switch (psp) { > case POWER_SUPPLY_PROP_CHARGE_TYPE: Johan
diff --git a/drivers/usb/misc/apple-mfi-fastcharge.c b/drivers/usb/misc/apple-mfi-fastcharge.c index b403094a6b3a..9e1ad4536e36 100644 --- a/drivers/usb/misc/apple-mfi-fastcharge.c +++ b/drivers/usb/misc/apple-mfi-fastcharge.c @@ -120,8 +120,10 @@ static int apple_mfi_fc_set_property(struct power_supply *psy, dev_dbg(&mfi->udev->dev, "prop: %d\n", psp); ret = pm_runtime_get_sync(&mfi->udev->dev); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_noidle(&mfi->udev->dev); return ret; + } switch (psp) { case POWER_SUPPLY_PROP_CHARGE_TYPE:
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device is active or has error(else....), resume operation will fail. If we do not call put operation to decrease the reference, the result is that this device cannot enter the idle state and always stay busy or other non-idle state. Fixes: 249fa8217b846 ("USB: Add driver to control USB fast charge for iOS devices") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> --- drivers/usb/misc/apple-mfi-fastcharge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)