| Message ID | 20201106114300.1245-7-pawell@cadence.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduced new Cadence USBSSP DRD Driver. | expand |
On 20-11-06 12:42:56, Pawel Laszczak wrote: > Patch defines macros, registers and structures used by > Device side driver. > > Because the size of main patch is very big, I’ve decided to create > separate patch for cdnsp-gadget.h. It should simplify reviewing the code. > > Signed-off-by: Pawel Laszczak <pawell@cadence.com> > --- > drivers/usb/cdns3/cdnsp-gadget.h | 1463 ++++++++++++++++++++++++++++++ > 1 file changed, 1463 insertions(+) > create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h > > diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h > new file mode 100644 > index 000000000000..29d5e2d00879 > --- /dev/null > +++ b/drivers/usb/cdns3/cdnsp-gadget.h > @@ -0,0 +1,1463 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Cadence CDNSP DRD Driver. > + * > + * Copyright (C) 2020 Cadence. > + * > + * Author: Pawel Laszczak <pawell@cadence.com> > + * > + * Code based on Linux XHCI driver. > + * Origin: Copyright (C) 2008 Intel Corp. > + */ > +#ifndef __LINUX_CDNSP_GADGET_H > +#define __LINUX_CDNSP_GADGET_H > + > +#include <linux/io-64-nonatomic-lo-hi.h> > +#include <linux/usb/gadget.h> > +#include <linux/irq.h> > + > +/* Max number slots - only 1 is allowed. */ > +#define CDNSP_DEV_MAX_SLOTS 1 > + > +#define CDNSP_EP0_SETUP_SIZE 512 > + > +/*16 for in and 16 for out. */ > +#define CDNSP_ENDPOINTS_NUM 32 > + > +/* Best Effort Service Latency. */ > +#define CDNSP_DEFAULT_BESL 0 > + > +/* Device Controller command default timeout value in us */ > +#define CDNSP_CMD_TIMEOUT (15 * 1000) > + > +/* Up to 16 ms to halt an device controller */ > +#define CDNSP_MAX_HALT_USEC (16 * 1000) > + > +#define CDNSP_CTX_SIZE 2112 > + > +/* > + * Controller register interface. > + */ > + > +/** > + * struct cdnsp_cap_regs - CDNSP Registers. > + * @hc_capbase: Length of the capabilities register and controller > + * version number > + * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 > + * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 > + * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 > + * @hcc_params: HCCPARAMS - Capability Parameters > + * @db_off: DBOFF - Doorbell array offset > + * @run_regs_off: RTSOFF - Runtime register space offset > + * @hcc_params2: HCCPARAMS2 Capability Parameters 2, > + */ > +struct cdnsp_cap_regs { > + __le32 hc_capbase; > + __le32 hcs_params1; > + __le32 hcs_params2; > + __le32 hcs_params3; > + __le32 hcc_params; > + __le32 db_off; > + __le32 run_regs_off; > + __le32 hcc_params2; > + /* Reserved up to (CAPLENGTH - 0x1C) */ > +}; > + > +/* hc_capbase bitmasks. */ > +/* bits 7:0 - how long is the Capabilities register. */ > +#define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0)) > +/* bits 31:16 */ > +#define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1)) > + > +/* HCSPARAMS1 - hcs_params1 - bitmasks */ > +/* bits 0:7, Max Device Endpoints */ > +#define HCS_ENDPOINTS_MASK GENMASK(7, 0) > +#define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0) > + > +/* HCCPARAMS offset from PCI base address */ > +#define HCC_PARAMS_OFFSET 0x10 > + > +/* HCCPARAMS - hcc_params - bitmasks */ > +/* true: device controller can use 64-bit address pointers. */ What does "true" mean at above comment? > +#define HCC_64BIT_ADDR(p) ((p) & BIT(0)) > +/* true: device controller uses 64-byte Device Context structures. */ ditto > +#define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2)) > +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */ > +#define HCC_MAX_PSA(p) ((((p) >> 12) & 0xf) + 1) > +/* Extended Capabilities pointer from PCI base. */ > +#define HCC_EXT_CAPS(p) (((p) & GENMASK(31, 16)) >> 16) > + > +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) > + > +/* db_off bitmask - bits 0:1 reserved. */ > +#define DBOFF_MASK GENMASK(31, 2) > + > +/* run_regs_off bitmask - bits 0:4 reserved. */ > +#define RTSOFF_MASK GENMASK(31, 5) > + > +/** > + * struct cdnsp_op_regs - Device Controller Operational Registers. > + * @command: USBCMD - Controller command register. > + * @status: USBSTS - Controller status register. > + * @page_size: This indicates the page size that the device controller supports. > + * If bit n is set, the controller supports a page size of 2^(n+12), > + * up to a 128MB page size. 4K is the minimum page size. > + * @dnctrl: DNCTRL - Device notification control register. > + * @cmd_ring: CRP - 64-bit Command Ring Pointer. > + * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer. > + * @config_reg: CONFIG - Configure Register > + * @port_reg_base: PORTSCn - base address for Port Status and Control > + * Each port has a Port Status and Control register, > + * followed by a Port Power Management Status and Control > + * register, a Port Link Info register, and a reserved > + * register. > + */ > +struct cdnsp_op_regs { > + __le32 command; > + __le32 status; > + __le32 page_size; > + __le32 reserved1; > + __le32 reserved2; > + __le32 dnctrl; > + __le64 cmd_ring; > + /* rsvd: offset 0x20-2F. */ > + __le32 reserved3[4]; > + __le64 dcbaa_ptr; > + __le32 config_reg; > + /* rsvd: offset 0x3C-3FF. */ > + __le32 reserved4[241]; > + /* port 1 registers, which serve as a base address for other ports. */ > + __le32 port_reg_base; > +}; > + > +/* Number of registers per port. */ > +#define NUM_PORT_REGS 4 > + > +/** > + * struct cdnsp_port_regs - Port Registers. > + * @portsc: PORTSC - Port Status and Control Register. > + * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register. > + * @portli: PORTLI - Port Link Info register. > + */ > +struct cdnsp_port_regs { > + __le32 portsc; > + __le32 portpmsc; > + __le32 portli; > + __le32 reserved; > +}; > + > +/* > + * These bits are Read Only (RO) and should be saved and written to the > + * registers: 0 (connect status) and 10:13 (port speed). > + * These bits are also sticky - meaning they're in the AUX well and they aren't > + * changed by a hot and warm. > + */ > +#define CDNSP_PORT_RO (PORT_CONNECT | DEV_SPEED_MASK) > + > +/* > + * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit: > + * bits 5:8 (link state), 25:26 ("wake on" enable state) > + */ > +#define CDNSP_PORT_RWS (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E) > + > +/* > + * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect: > + * bits 1 (port enable/disable), 17 ( connect changed), > + * 21 (port reset changed) , 22 (Port Link State Change), > + */ > +#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC) > + > +/* USBCMD - USB command - bitmasks. */ > +/* Run/Stop, controller execution - do not write unless controller is halted.*/ > +#define CMD_R_S BIT(0) > +/* > + * Reset device controller - resets internal controller state machine and all > + * registers (except PCI config regs). > + */ > +#define CMD_RESET BIT(1) > +/* Event Interrupt Enable - a '1' allows interrupts from the controller. */ > +#define CMD_INTE BIT(2) > +/* > + * Device System Error Interrupt Enable - get out-of-band signal for > + * controller errors. > + */ > +#define CMD_DSEIE BIT(3) > +/* device controller save/restore state. */ > +#define CMD_CSS BIT(8) > +#define CMD_CRS BIT(9) > +/* > + * Enable Wrap Event - '1' means device controller generates an event > + * when MFINDEX wraps. > + */ > +#define CMD_EWE BIT(10) > +/*bit 13 CEM Enable (CME) */ Unless code? > +#define CMD_DEVEN BIT(17) > +/* bits 16:31 are reserved (and should be preserved on writes). */ > + > +/* Command register values to disable interrupts. */ > +#define CDNSP_IRQS (CMD_INTE | CMD_DSEIE | CMD_EWE) > + > +/* USBSTS - USB status - bitmasks */ > +/* controller not running - set to 1 when run/stop bit is cleared. */ > +#define STS_HALT BIT(0) > +/* > + * serious error, e.g. PCI parity error. The controller will clear > + * the run/stop bit. > + */ > +#define STS_FATAL BIT(2) > +/* event interrupt - clear this prior to clearing any IP flags in IR set.*/ > +#define STS_EINT BIT(3) > +/* port change detect */ > +#define STS_PCD BIT(4) > +/* save state status - '1' means device controller is saving state. */ > +#define STS_SSS BIT(8) > +/* restore state status - '1' means controllers is restoring state. */ > +#define STS_RSS BIT(9) > +/* true: save or restore error */ > +#define STS_SRE BIT(10) > +/* true: device Not Ready to accept doorbell or op reg writes after reset. */ > +#define STS_CNR BIT(11) > +/* true: internal Device Controller Error.*/ > +#define STS_HCE BIT(12) > + > +/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */ > +/* bit 0 is the command ring cycle state. */ > +#define CMD_RING_CS BIT(0) > +/* stop ring immediately - abort the currently executing command. */ > +#define CMD_RING_ABORT BIT(2) > +/* > + * Command Ring Busy. > + * Set when Doorbell register is written with DB for command and cleared when > + * the controller reached end of CR. > + */ > +#define CMD_RING_BUSY(p) ((p) & BIT(4)) > +/* true: command ring is running */ > +#define CMD_RING_RUNNING BIT(3) > +/* Command Ring pointer - bit mask for the lower 32 bits. */ > +#define CMD_RING_RSVD_BITS GENMASK(5, 0) > + > +/* CONFIG - Configure Register - config_reg bitmasks. */ > +/* bits 0:7 - maximum number of device slots enabled. */ > +#define MAX_DEVS GENMASK(7, 0) > +/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */ > +#define CONFIG_U3E BIT(8) > + > +/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */ > +/* true: device connected. */ > +#define PORT_CONNECT BIT(0) > +/* true: port enabled. */ > +#define PORT_PED BIT(1) > +/* true: port reset signaling asserted. */ > +#define PORT_RESET BIT(4) > +/* > + * Port Link State - bits 5:8 > + * A read gives the current link PM state of the port, > + * a write with Link State Write Strobe set sets the link state. Duplicate "set" > + */ > +#define PORT_PLS_MASK GENMASK(8, 5) > +#define XDEV_U0 (0x0 << 5) > +#define XDEV_U1 (0x1 << 5) > +#define XDEV_U2 (0x2 << 5) > +#define XDEV_U3 (0x3 << 5) > +#define XDEV_DISABLED (0x4 << 5) > +#define XDEV_RXDETECT (0x5 << 5) > +#define XDEV_INACTIVE (0x6 << 5) > +#define XDEV_POLLING (0x7 << 5) > +#define XDEV_RECOVERY (0x8 << 5) > +#define XDEV_HOT_RESET (0x9 << 5) > +#define XDEV_COMP_MODE (0xa << 5) > +#define XDEV_TEST_MODE (0xb << 5) > +#define XDEV_RESUME (0xf << 5) > +/* true: port has power. */ ditto > +#define PORT_POWER BIT(9) > +/* > + * bits 10:13 indicate device speed: > + * 0 - undefined speed - port hasn't be initialized by a reset yet > + * 1 - full speed > + * 2 - Reserved (Low Speed not supported > + * 3 - high speed > + * 4 - super speed > + * 5 - super speed > + * 6-15 reserved > + */ > +#define DEV_SPEED_MASK GENMASK(13, 10) > +#define XDEV_FS (0x1 << 10) > +#define XDEV_HS (0x3 << 10) > +#define XDEV_SS (0x4 << 10) > +#define XDEV_SSP (0x5 << 10) > +#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0 << 10)) > +#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) > +#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) > +#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) > +#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) > +#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) > +#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) > +/* Port Link State Write Strobe - set this when changing link state */ > +#define PORT_LINK_STROBE BIT(16) > +/* true: connect status change */ > +#define PORT_CSC BIT(17) > +/* true: warm reset for a USB 3.0 device is done. */ > +#define PORT_WRC BIT(19) > +/* true: reset change - 1 to 0 transition of PORT_RESET */ > +#define PORT_RC BIT(21) > +/* > + * port link status change - set on some port link state transitions: > + * Transition Reason > + * ---------------------------------------------------------------------------- > + * - U3 to Resume Wakeup signaling from a device > + * - Resume to Recovery to U0 USB 3.0 device resume > + * - Resume to U0 USB 2.0 device resume > + * - U3 to Recovery to U0 Software resume of USB 3.0 device complete > + * - U3 to U0 Software resume of USB 2.0 device complete > + * - U2 to U0 L1 resume of USB 2.1 device complete > + * - U0 to U0 L1 entry rejection by USB 2.1 device > + * - U0 to disabled L1 entry error with USB 2.1 device > + * - Any state to inactive Error on USB 3.0 port > + */ > +#define PORT_PLC BIT(22) > +/* Port configure error change - port failed to configure its link partner. */ > +#define PORT_CEC BIT(23) > +/* Wake on connect (enable). */ > +#define PORT_WKCONN_E BIT(25) > +/* Wake on disconnect (enable). */ > +#define PORT_WKDISC_E BIT(26) > +/* Indicates if Warm Reset is being received. */ > +#define PORT_WR BIT(31) > + > +#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC) > + > +/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */ > +/* Enables U1 entry. */ > +#define PORT_U1_TIMEOUT_MASK GENMASK(7, 0) > +#define PORT_U1_TIMEOUT(p) ((p) & PORT_U1_TIMEOUT_MASK) > +/* Enables U2 entry .*/ > +#define PORT_U2_TIMEOUT_MASK GENMASK(14, 8) > +#define PORT_U2_TIMEOUT(p) (((p) << 8) & PORT_U2_TIMEOUT_MASK) > + > +/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */ > +#define PORT_L1S_MASK GENMASK(2, 0) > +#define PORT_L1S(p) ((p) & PORT_L1S_MASK) > +#define PORT_L1S_ACK PORT_L1S(1) > +#define PORT_L1S_NYET PORT_L1S(2) > +#define PORT_L1S_STALL PORT_L1S(3) > +#define PORT_L1S_TIMEOUT PORT_L1S(4) > +/* Remote Wake Enable. */ > +#define PORT_RWE BIT(3) > +/* Best Effort Service Latency (BESL). */ > +#define PORT_BESL(p) (((p) << 4) & GENMASK(7, 4)) > +/* Hardware LPM Enable (HLE). */ > +#define PORT_HLE BIT(16) > +/* Received Best Effort Service Latency (BESL). */ > +#define PORT_RRBESL(p) (((p) & GENMASK(20, 17)) >> 17) > +/* Port Test Control. */ > +#define PORT_TEST_MODE_MASK GENMASK(31, 28) > +#define PORT_TEST_MODE(p) (((p) << 28) & PORT_TEST_MODE_MASK) > + > +/** > + * struct cdnsp_intr_reg - Interrupt Register Set. > + * @irq_pending: IMAN - Interrupt Management Register. Used to enable > + * interrupts and check for pending interrupts. > + * @irq_control: IMOD - Interrupt Moderation Register. > + * Used to throttle interrupts. > + * @erst_size: Number of segments in the Event Ring Segment Table (ERST). > + * @erst_base: ERST base address. > + * @erst_dequeue: Event ring dequeue pointer. > + * > + * Each interrupter (defined by a MSI-X vector) has an event ring and an Event > + * Ring Segment Table (ERST) associated with it. The event ring is comprised of > + * multiple segments of the same size. The controller places events on the ring > + * and "updates the Cycle bit in the TRBs to indicate to software the current > + * position of the Enqueue Pointer." The driver processes those events and > + * updates the dequeue pointer. > + */ > +struct cdnsp_intr_reg { > + __le32 irq_pending; > + __le32 irq_control; > + __le32 erst_size; > + __le32 rsvd; > + __le64 erst_base; > + __le64 erst_dequeue; > +}; > + > +/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */ > +#define IMAN_IE BIT(1) > +#define IMAN_IP BIT(0) > +/* bits 2:31 need to be preserved */ > +#define IMAN_IE_SET(p) (((p) & IMAN_IE) | 0x2) > +#define IMAN_IE_CLEAR(p) (((p) & IMAN_IE) & ~(0x2)) > + > +/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */ > +/* > + * Minimum interval between interrupts (in 250ns intervals). The interval > + * between interrupts will be longer if there are no events on the event ring. > + * Default is 4000 (1 ms). > + */ > +#define IMOD_INTERVAL_MASK GENMASK(15, 0) > +/* Counter used to count down the time to the next interrupt - HW use only */ > +#define IMOD_COUNTER_MASK GENMASK(31, 16) > +#define IMOD_DEFAULT_INTERVAL 0 > + > +/* erst_size bitmasks. */ > +/* Preserve bits 16:31 of erst_size. */ > +#define ERST_SIZE_MASK GENMASK(31, 16) > + > +/* erst_dequeue bitmasks. */ > +/* > + * Dequeue ERST Segment Index (DESI) - Segment number (or alias) > + * where the current dequeue pointer lies. This is an optional HW hint. > + */ > +#define ERST_DESI_MASK GENMASK(2, 0) > +/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */ > +#define ERST_EHB BIT(3) > +#define ERST_PTR_MASK GENMASK(3, 0) > + > +/** > + * struct cdnsp_run_regs > + * @microframe_index: MFINDEX - current microframe number. > + * @ir_set: Array of Interrupter registers. > + * > + * Device Controller Runtime Registers: > + * "Software should read and write these registers using only Dword (32 bit) > + * or larger accesses" > + */ > +struct cdnsp_run_regs { > + __le32 microframe_index; > + __le32 rsvd[7]; > + struct cdnsp_intr_reg ir_set[128]; > +}; > + > +/** > + * USB2.0 Port Peripheral Configuration Registers. > + * @ext_cap: Header register for Extended Capability. > + * @port_reg1: Timer Configuration Register. > + * @port_reg2: Timer Configuration Register. > + * @port_reg3: Timer Configuration Register. > + * @port_reg4: Timer Configuration Register. > + * @port_reg5: Timer Configuration Register. > + * @port_reg6: Chicken bits for USB20PPP. > + */ > +struct cdnsp_20port_cap { > + __le32 ext_cap; > + __le32 port_reg1; > + __le32 port_reg2; > + __le32 port_reg3; > + __le32 port_reg4; > + __le32 port_reg5; > + __le32 port_reg6; > +}; > + > +/* Extended capability register fields */ > +#define EXT_CAPS_ID(p) (((p) >> 0) & GENMASK(7, 0)) > +#define EXT_CAPS_NEXT(p) (((p) >> 8) & GENMASK(7, 0)) > +/* Extended capability IDs - ID 0 reserved */ > +#define EXT_CAPS_PROTOCOL 2 > + > +/* USB 2.0 Port Peripheral Configuration Extended Capability */ > +#define EXT_CAP_CFG_DEV_20PORT_CAP_ID 0xC1 > +/* > + * Setting this bit to '1' enables automatic wakeup from L1 state on transfer > + * TRB prepared when USBSSP operates in USB2.0 mode. > + */ > +#define PORT_REG6_L1_L0_HW_EN BIT(1) > +/* > + * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0 > + * mode (disables High Speed). > + */ > +#define PORT_REG6_FORCE_FS BIT(0) > + > +/** > + * USB3.x Port Peripheral Configuration Registers. > + * @ext_cap: Header register for Extended Capability. > + * @mode_addr: Miscellaneous 3xPORT operation mode configuration register. > + * @mode_2: 3x Port Control Register 2. > + */ > +struct cdnsp_3xport_cap { > + __le32 ext_cap; > + __le32 mode_addr; > + __le32 reserved[52]; > + __le32 mode_2; > +}; > + > +/* Extended Capability Header for 3XPort Configuration Registers. */ > +#define D_XEC_CFG_3XPORT_CAP 0xC0 > +#define CFG_3XPORT_SSP_SUPPORT BIT(31) > +#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN BIT(0) > + > +/* Revision Extended Capability ID */ > +#define RTL_REV_CAP 0xC4 > +#define RTL_REV_CAP_RX_BUFF_CMD_SIZE BITMASK(31, 24) > +#define RTL_REV_CAP_RX_BUFF_SIZE BITMASK(15, 0) > +#define RTL_REV_CAP_TX_BUFF_CMD_SIZE BITMASK(31, 24) > +#define RTL_REV_CAP_TX_BUFF_SIZE BITMASK(15, 0) > + > +#define CDNSP_VER_1 0x00000000 > +#define CDNSP_VER_2 0x10000000 > + > +#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) ((pdev)->rev_cap.ep_supported & \ > + (BIT(ep_num) << ((dir) ? 0 : 16))) > + > +/** > + * struct cdnsp_rev_cap - controller capabilities . > + * @ext_cap: Header for RTL Revision Extended Capability. > + * @rtl_revision: RTL revision. > + * @rx_buff_size: Rx buffer sizes. > + * @tx_buff_size: Tx buffer sizes. > + * @ep_supported: Supported endpoints. > + * @ctrl_revision: Controller revision ID. > + */ > +struct cdnsp_rev_cap { > + __le32 ext_cap; > + __le32 rtl_revision; > + __le32 rx_buff_size; > + __le32 tx_buff_size; > + __le32 ep_supported; > + __le32 ctrl_revision; > +}; > + > +/* USB2.0 Port Peripheral Configuration Registers. */ > +#define D_XEC_PRE_REGS_CAP 0xC8 > +#define REG_CHICKEN_BITS_2_OFFSET 0x48 > +#define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28) > + > +/* XBUF Extended Capability ID. */ > +#define XBUF_CAP_ID 0xCB > +#define XBUF_RX_TAG_MASK_0_OFFSET 0x1C > +#define XBUF_RX_TAG_MASK_1_OFFSET 0x24 > +#define XBUF_TX_CMD_OFFSET 0x2C > + > +/** > + * struct cdnsp_doorbell_array. > + * @cmd_db: Command ring doorbell register. > + * @ep_db: Endpoint ring doorbell register. > + * Bits 0 - 7: Endpoint target. > + * Bits 8 - 15: RsvdZ. > + * Bits 16 - 31: Stream ID. > + */ > +struct cdnsp_doorbell_array { > + __le32 cmd_db; > + __le32 ep_db; > +}; > + > +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) > +#define DB_VALUE_EP0_OUT(ep, stream) ((ep) & 0xff) > +#define DB_VALUE_CMD 0x00000000 > + > +/** > + * struct cdnsp_container_ctx. > + * @type: Type of context. Used to calculated offsets to contained contexts. > + * @size: Size of the context data. > + * @ctx_size: context data structure size - 64 or 32 bits. > + * @dma: dma address of the bytes. > + * @bytes: The raw context data given to HW. > + * > + * Represents either a Device or Input context. Holds a pointer to the raw > + * memory used for the context (bytes) and dma address of it (dma). > + */ > +struct cdnsp_container_ctx { > + unsigned int type; > +#define CDNSP_CTX_TYPE_DEVICE 0x1 > +#define CDNSP_CTX_TYPE_INPUT 0x2 > + int size; > + int ctx_size; > + dma_addr_t dma; > + u8 *bytes; > +}; > + > +/** > + * struct cdnsp_slot_ctx > + * @dev_info: Device speed, and last valid endpoint. > + * @dev_port: Device port number that is needed to access the USB device. > + * @int_target: Interrupter target number. > + * @dev_state: Slot state and device address. > + * > + * Slot Context - This assumes the controller uses 32-byte context > + * structures. If the controller uses 64-byte contexts, there is an additional > + * 32 bytes reserved at the end of the slot context for controller internal use. > + */ > +struct cdnsp_slot_ctx { > + __le32 dev_info; > + __le32 dev_port; > + __le32 int_target; > + __le32 dev_state; > + /* offset 0x10 to 0x1f reserved for controller internal use. */ > + __le32 reserved[4]; > +}; > + > +/* Bits 20:23 in the Slot Context are the speed for the device. */ > +#define SLOT_SPEED_FS (XDEV_FS << 10) > +#define SLOT_SPEED_HS (XDEV_HS << 10) > +#define SLOT_SPEED_SS (XDEV_SS << 10) > +#define SLOT_SPEED_SSP (XDEV_SSP << 10) > + > +/* dev_info bitmasks. */ > +/* Device speed - values defined by PORTSC Device Speed field - 20:23. */ > +#define DEV_SPEED GENMASK(23, 20) > +#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20) > +/* Index of the last valid endpoint context in this device context - 27:31. */ > +#define LAST_CTX_MASK GENMASK(31, 27) > +#define LAST_CTX(p) ((p) << 27) > +#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1) > +#define SLOT_FLAG BIT(0) > +#define EP0_FLAG BIT(1) > + > +/* dev_port bitmasks */ > +/* Device port number that is needed to access the USB device. */ > +#define DEV_PORT(p) (((p) & 0xff) << 16) > + > +/* dev_state bitmasks */ > +/* USB device address - assigned by the controller. */ > +#define DEV_ADDR_MASK GENMASK(7, 0) > +/* Slot state */ > +#define SLOT_STATE GENMASK(31, 27) > +#define GET_SLOT_STATE(p) (((p) & SLOT_STATE) >> 27) > + > +#define SLOT_STATE_DISABLED 0 > +#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED > +#define SLOT_STATE_DEFAULT 1 > +#define SLOT_STATE_ADDRESSED 2 > +#define SLOT_STATE_CONFIGURED 3 > + > +/** > + * struct cdnsp_ep_ctx. > + * @ep_info: Endpoint state, streams, mult, and interval information. > + * @ep_info2: Information on endpoint type, max packet size, max burst size, > + * error count, and whether the controller will force an event for > + * all transactions. > + * @deq: 64-bit ring dequeue pointer address. If the endpoint only > + * defines one stream, this points to the endpoint transfer ring. > + * Otherwise, it points to a stream context array, which has a > + * ring pointer for each flow. > + * @tx_info: Average TRB lengths for the endpoint ring and > + * max payload within an Endpoint Service Interval Time (ESIT). > + * > + * Endpoint Context - This assumes the controller uses 32-byte context > + * structures. If the controller uses 64-byte contexts, there is an additional > + * 32 bytes reserved at the end of the endpoint context for controller internal > + * use. > + */ > +struct cdnsp_ep_ctx { > + __le32 ep_info; > + __le32 ep_info2; > + __le64 deq; > + __le32 tx_info; > + /* offset 0x14 - 0x1f reserved for controller internal use. */ > + __le32 reserved[3]; > +}; > + > +/* ep_info bitmasks. */ > +/* > + * Endpoint State - bits 0:2: > + * 0 - disabled > + * 1 - running > + * 2 - halted due to halt condition > + * 3 - stopped > + * 4 - TRB error > + * 5-7 - reserved > + */ > +#define EP_STATE_MASK GENMASK(3, 0) > +#define EP_STATE_DISABLED 0 > +#define EP_STATE_RUNNING 1 > +#define EP_STATE_HALTED 2 > +#define EP_STATE_STOPPED 3 > +#define EP_STATE_ERROR 4 > +#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK) > + > +/* Mult - Max number of burst within an interval, in EP companion desc. */ > +#define EP_MULT(p) (((p) << 8) & GENMASK(9, 8)) > +#define CTX_TO_EP_MULT(p) (((p) & GENMASK(9, 8)) >> 8) > +/* bits 10:14 are Max Primary Streams. */ > +/* bit 15 is Linear Stream Array. */ > +/* Interval - period between requests to an endpoint - 125u increments. */ > +#define EP_INTERVAL(p) (((p) << 16) & GENMASK(23, 16)) > +#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) & GENMASK(23, 16)) >> 16)) > +#define CTX_TO_EP_INTERVAL(p) (((p) & GENMASK(23, 16)) >> 16) > +#define EP_MAXPSTREAMS_MASK GENMASK(14, 10) > +#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) > +#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10) > +/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ > +#define EP_HAS_LSA BIT(15) > + > +/* ep_info2 bitmasks */ > +#define ERROR_COUNT(p) (((p) & 0x3) << 1) > +#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) > +#define EP_TYPE(p) ((p) << 3) > +#define ISOC_OUT_EP 1 > +#define BULK_OUT_EP 2 > +#define INT_OUT_EP 3 > +#define CTRL_EP 4 > +#define ISOC_IN_EP 5 > +#define BULK_IN_EP 6 > +#define INT_IN_EP 7 > +/* bit 6 reserved. */ > +/* bit 7 is Device Initiate Disable - for disabling stream selection. */ > +#define MAX_BURST(p) (((p) << 8) & GENMASK(15, 8)) > +#define CTX_TO_MAX_BURST(p) (((p) & GENMASK(15, 8)) >> 8) > +#define MAX_PACKET(p) (((p) << 16) & GENMASK(31, 16)) > +#define MAX_PACKET_MASK GENMASK(31, 16) > +#define MAX_PACKET_DECODED(p) (((p) & GENMASK(31, 16)) >> 16) > + > +/* tx_info bitmasks. */ > +#define EP_AVG_TRB_LENGTH(p) ((p) & GENMASK(15, 0)) > +#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) << 16) & GENMASK(31, 16)) > +#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) & GENMASK(23, 16)) >> 16) << 24) > +#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p) (((p) & GENMASK(31, 16)) >> 16) > +#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) & GENMASK(31, 24)) >> 24) > + > +/* deq bitmasks. */ > +#define EP_CTX_CYCLE_MASK BIT(0) > +#define CTX_DEQ_MASK (~0xfL) > + > +/** > + * struct cdnsp_input_control_context > + * Input control context; > + * > + * @drop_context: Set the bit of the endpoint context you want to disable. > + * @add_context: Set the bit of the endpoint context you want to enable. > + */ > +struct cdnsp_input_control_ctx { > + __le32 drop_flags; > + __le32 add_flags; > + __le32 rsvd2[6]; > +}; > + > +/** > + * Represents everything that is needed to issue a command on the command ring. > + * > + * @in_ctx: Pointer to input context structure. > + * @status: Command Completion Code for last command. > + * @command_trb: Pointer to command TRB. > + */ > +struct cdnsp_command { > + /* Input context for changing device state. */ > + struct cdnsp_container_ctx *in_ctx; > + u32 status; > + union cdnsp_trb *command_trb; > +}; > + > +/** > + * Stream context structure. > + * > + * @stream_ring: 64-bit stream ring address, cycle state, and stream type. > + * @reserved: offset 0x14 - 0x1f reserved for controller internal use. > + */ > +struct cdnsp_stream_ctx { > + __le64 stream_ring; > + __le32 reserved[2]; > +}; > + > +/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */ > +#define SCT_FOR_CTX(p) (((p) << 1) & GENMASK(3, 1)) > +/* Secondary stream array type, dequeue pointer is to a transfer ring. */ > +#define SCT_SEC_TR 0 > +/* Primary stream array type, dequeue pointer is to a transfer ring. */ > +#define SCT_PRI_TR 1 > + > +/** > + * struct cdnsp_stream_info: Representing everything that is needed to > + * supports stream capable endpoints. > + * @stream_rings: Array of pointers containing Transfer rings for all > + * supported streams. > + * @num_streams: Number of streams, including stream 0. > + * @stream_ctx_array: The stream context array may be bigger than the number > + * of streams the driver asked for. > + * @num_stream_ctxs: Number of streams. > + * @ctx_array_dma: Dma address of Context Stream Array. > + * @trb_address_map: For mapping physical TRB addresses to segments in > + * stream rings. > + * @td_count: Number of TDs associated with endpoint. > + * @first_prime_det: First PRIME packet detected. > + * @drbls_count: Number of allowed doorbells. > + */ > +struct cdnsp_stream_info { > + struct cdnsp_ring **stream_rings; > + unsigned int num_streams; > + struct cdnsp_stream_ctx *stream_ctx_array; > + unsigned int num_stream_ctxs; > + dma_addr_t ctx_array_dma; > + struct radix_tree_root trb_address_map; > + int td_count; > + u8 first_prime_det; > +#define STREAM_DRBL_FIFO_DEPTH 2 > + u8 drbls_count; > +}; > + > +#define STREAM_LOG_STREAMS 4 > +#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS) > + > +#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1 > +#error "Not suupported stream value" > +#endif > + > +/** > + * struct cdnsp_ep - extended device side representation of USB endpoint. > + * @endpoint: usb endpoint > + * @pending_req_list: List of requests queuing on transfer ring. > + * @pdev: Device associated with this endpoint. > + * @number: Endpoint number (1 - 15). > + * idx: The device context index (DCI). > + * interval: Interval between packets used for ISOC endpoint. > + * @name: A human readable name e.g. ep1out. > + * @direction: Endpoint direction. > + * @buffering: Number of on-chip buffers related to endpoint. > + * @buffering_period; Number of on-chip buffers related to periodic endpoint. > + * @in_ctx: Pointer to input endpoint context structure. > + * @out_ctx: Pointer to output endpoint context structure. > + * @ring: Pointer to transfer ring. > + * @stream_info: Hold stream information. > + * @ep_state: Current state of endpoint. > + * skip: Sometimes the controller can not process isochronous endpoint ring add "@" Peter > + * quickly enough, and it will miss some isoc tds on the ring and > + * generate Missed Service Error Event. > + * Set skip flag when receive a Missed Service Error Event and > + * process the missed tds on the endpoint ring. > + */ > +struct cdnsp_ep { > + struct usb_ep endpoint; > + struct list_head pending_list; > + struct cdnsp_device *pdev; > + u8 number; > + u8 idx; > + u32 interval; > + char name[20]; > + u8 direction; > + u8 buffering; > + u8 buffering_period; > + struct cdnsp_ep_ctx *in_ctx; > + struct cdnsp_ep_ctx *out_ctx; > + struct cdnsp_ring *ring; > + struct cdnsp_stream_info stream_info; > + unsigned int ep_state; > +#define EP_ENABLED BIT(0) > +#define EP_DIS_IN_RROGRESS BIT(1) > +#define EP_HALTED BIT(2) > +#define EP_STOPPED BIT(3) > +#define EP_WEDGE BIT(4) > +#define EP0_HALTED_STATUS BIT(5) > +#define EP_HAS_STREAMS BIT(6) > + > + bool skip; > +}; > + > +/** > + * struct cdnsp_device_context_array > + * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts. > + * @dma: DMA address for device contexts structure. > + */ > +struct cdnsp_device_context_array { > + __le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1]; > + dma_addr_t dma; > +}; > + > +/** > + * struct cdnsp_transfer_event. > + * @buffer: 64-bit buffer address, or immediate data. > + * @transfer_len: Data length transferred. > + * @flags: Field is interpreted differently based on the type of TRB. > + */ > +struct cdnsp_transfer_event { > + __le64 buffer; > + __le32 transfer_len; > + __le32 flags; > +}; > + > +/* Invalidate event after disabling endpoint. */ > +#define TRB_EVENT_INVALIDATE 8 > + > +/* Transfer event TRB length bit mask. */ > +/* bits 0:23 */ > +#define EVENT_TRB_LEN(p) ((p) & GENMASK(23, 0)) > +/* Completion Code - only applicable for some types of TRBs */ > +#define COMP_CODE_MASK (0xff << 24) > +#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24) > +#define COMP_INVALID 0 > +#define COMP_SUCCESS 1 > +#define COMP_DATA_BUFFER_ERROR 2 > +#define COMP_BABBLE_DETECTED_ERROR 3 > +#define COMP_TRB_ERROR 5 > +#define COMP_RESOURCE_ERROR 7 > +#define COMP_NO_SLOTS_AVAILABLE_ERROR 9 > +#define COMP_INVALID_STREAM_TYPE_ERROR 10 > +#define COMP_SLOT_NOT_ENABLED_ERROR 11 > +#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12 > +#define COMP_SHORT_PACKET 13 > +#define COMP_RING_UNDERRUN 14 > +#define COMP_RING_OVERRUN 15 > +#define COMP_VF_EVENT_RING_FULL_ERROR 16 > +#define COMP_PARAMETER_ERROR 17 > +#define COMP_CONTEXT_STATE_ERROR 19 > +#define COMP_EVENT_RING_FULL_ERROR 21 > +#define COMP_INCOMPATIBLE_DEVICE_ERROR 22 > +#define COMP_MISSED_SERVICE_ERROR 23 > +#define COMP_COMMAND_RING_STOPPED 24 > +#define COMP_COMMAND_ABORTED 25 > +#define COMP_STOPPED 26 > +#define COMP_STOPPED_LENGTH_INVALID 27 > +#define COMP_STOPPED_SHORT_PACKET 28 > +#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29 > +#define COMP_ISOCH_BUFFER_OVERRUN 31 > +#define COMP_EVENT_LOST_ERROR 32 > +#define COMP_UNDEFINED_ERROR 33 > +#define COMP_INVALID_STREAM_ID_ERROR 34 > + > +/*Transfer Event NRDY bit fields */ > +#define TRB_TO_DEV_STREAM(p) ((p) & GENMASK(16, 0)) > +#define TRB_TO_HOST_STREAM(p) ((p) & GENMASK(16, 0)) > +#define STREAM_PRIME_ACK 0xFFFE > +#define STREAM_REJECTED 0xFFFF > + > +/** Transfer Event bit fields **/ > +#define TRB_TO_EP_ID(p) (((p) & GENMASK(20, 16)) >> 16) > + > +/** > + * struct cdnsp_link_trb > + * @segment_ptr: 64-bit segment pointer. > + * @intr_target: Interrupter target. > + * @control: Flags. > + */ > +struct cdnsp_link_trb { > + __le64 segment_ptr; > + __le32 intr_target; > + __le32 control; > +}; > + > +/* control bitfields */ > +#define LINK_TOGGLE BIT(1) > + > +/** > + * struct cdnsp_event_cmd - Command completion event TRB. > + * cmd_trb: Pointer to command TRB, or the value passed by the event data trb > + * status: Command completion parameters and error code. > + * flags: Flags. > + */ > +struct cdnsp_event_cmd { > + __le64 cmd_trb; > + __le32 status; > + __le32 flags; > +}; > + > +/* flags bitmasks */ > + > +/* Address device - disable SetAddress. */ > +#define TRB_BSR BIT(9) > + > +/* Configure Endpoint - Deconfigure. */ > +#define TRB_DC BIT(9) > + > +/* Force Header */ > +#define TRB_FH_TO_PACKET_TYPE(p) ((p) & GENMASK(4, 0)) > +#define TRB_FH_TR_PACKET 0x4 > +#define TRB_FH_TO_DEVICE_ADDRESS(p) (((p) << 25) & GENMASK(31, 25)) > +#define TRB_FH_TR_PACKET_DEV_NOT 0x6 > +#define TRB_FH_TO_NOT_TYPE(p) (((p) << 4) & GENMASK(7, 4)) > +#define TRB_FH_TR_PACKET_FUNCTION_WAKE 0x1 > +#define TRB_FH_TO_INTERFACE(p) (((p) << 8) & GENMASK(15, 8)) > + > +enum cdnsp_setup_dev { > + SETUP_CONTEXT_ONLY, > + SETUP_CONTEXT_ADDRESS, > +}; > + > +/* bits 24:31 are the slot ID. */ > +#define TRB_TO_SLOT_ID(p) (((p) & GENMASK(31, 24)) >> 24) > +#define SLOT_ID_FOR_TRB(p) (((p) << 24) & GENMASK(31, 24)) > + > +/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */ > +#define TRB_TO_EP_INDEX(p) (((p) >> 16) & 0x1f) > + > +#define EP_ID_FOR_TRB(p) ((((p) + 1) << 16) & GENMASK(20, 16)) > + > +#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) > +#define TRB_TO_SUSPEND_PORT(p) (((p) >> 23) & 0x1) > +#define LAST_EP_INDEX 30 > + > +/* Set TR Dequeue Pointer command TRB fields. */ > +#define TRB_TO_STREAM_ID(p) ((((p) & GENMASK(31, 16)) >> 16)) > +#define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16)) > +#define SCT_FOR_TRB(p) (((p) << 1) & 0x7) > + > +/* Link TRB specific fields. */ > +#define TRB_TC BIT(1) > + > +/* Port Status Change Event TRB fields. */ > +/* Port ID - bits 31:24. */ > +#define GET_PORT_ID(p) (((p) & GENMASK(31, 24)) >> 24) > +#define SET_PORT_ID(p) (((p) << 24) & GENMASK(31, 24)) > +#define EVENT_DATA BIT(2) > + > +/* Normal TRB fields. */ > +/* transfer_len bitmasks - bits 0:16. */ > +#define TRB_LEN(p) ((p) & GENMASK(16, 0)) > +/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */ > +#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17) > +#define GET_TD_SIZE(p) (((p) & GENMASK(21, 17)) >> 17) > +/* > + * Controller uses the TD_SIZE field for TBC if Extended TBC > + * is enabled (ETE). > + */ > +#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17) > +/* Interrupter Target - which MSI-X vector to target the completion event at. */ > +#define TRB_INTR_TARGET(p) (((p) << 22) & GENMASK(31, 22)) > +#define GET_INTR_TARGET(p) (((p) & GENMASK(31, 22)) >> 22) > +/* > + * Total burst count field, Rsvdz on controller with Extended TBC > + * enabled (ETE). > + */ > +#define TRB_TBC(p) (((p) & 0x3) << 7) > +#define TRB_TLBPC(p) (((p) & 0xf) << 16) > + > +/* Cycle bit - indicates TRB ownership by driver or driver.*/ > +#define TRB_CYCLE BIT(0) > +/* > + * Force next event data TRB to be evaluated before task switch. > + * Used to pass OS data back after a TD completes. > + */ > +#define TRB_ENT BIT(1) > +/* Interrupt on short packet. */ > +#define TRB_ISP BIT(2) > +/* Set PCIe no snoop attribute. */ > +#define TRB_NO_SNOOP BIT(3) > +/* Chain multiple TRBs into a TD. */ > +#define TRB_CHAIN BIT(4) > +/* Interrupt on completion. */ > +#define TRB_IOC BIT(5) > +/* The buffer pointer contains immediate data. */ > +#define TRB_IDT BIT(6) > +/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */ > +#define TRB_STAT BIT(7) > +/* Block Event Interrupt. */ > +#define TRB_BEI BIT(9) > + > +/* Control transfer TRB specific fields. */ > +#define TRB_DIR_IN BIT(16) > + > +/* TRB bit mask in Data Stage TRB */ > +#define TRB_SETUPID_BITMASK GENMASK(9, 8) > +#define TRB_SETUPID(p) ((p) << 8) > +#define TRB_SETUPID_TO_TYPE(p) (((p) & TRB_SETUPID_BITMASK) >> 8) > + > +#define TRB_SETUP_SPEEDID_USB3 0x1 > +#define TRB_SETUP_SPEEDID_USB2 0x0 > +#define TRB_SETUP_SPEEDID(p) ((p) & (1 << 7)) > + > +#define TRB_SETUPSTAT_ACK 0x1 > +#define TRB_SETUPSTAT_STALL 0x0 > +#define TRB_SETUPSTAT(p) ((p) << 6) > + > +/* Isochronous TRB specific fields */ > +#define TRB_SIA BIT(31) > +#define TRB_FRAME_ID(p) (((p) << 20) & GENMASK(30, 20)) > + > +struct cdnsp_generic_trb { > + __le32 field[4]; > +}; > + > +union cdnsp_trb { > + struct cdnsp_link_trb link; > + struct cdnsp_transfer_event trans_event; > + struct cdnsp_event_cmd event_cmd; > + struct cdnsp_generic_trb generic; > +}; > + > +/* TRB bit mask. */ > +#define TRB_TYPE_BITMASK GENMASK(15, 10) > +#define TRB_TYPE(p) ((p) << 10) > +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) > + > +/* TRB type IDs. */ > +/* bulk, interrupt, isoc scatter/gather, and control data stage. */ > +#define TRB_NORMAL 1 > +/* Setup Stage for control transfers. */ > +#define TRB_SETUP 2 > +/* Data Stage for control transfers. */ > +#define TRB_DATA 3 > +/* Status Stage for control transfers. */ > +#define TRB_STATUS 4 > +/* ISOC transfers. */ > +#define TRB_ISOC 5 > +/* TRB for linking ring segments. */ > +#define TRB_LINK 6 > +#define TRB_EVENT_DATA 7 > +/* Transfer Ring No-op (not for the command ring). */ > +#define TRB_TR_NOOP 8 > + > +/* Command TRBs */ > +/* Enable Slot Command. */ > +#define TRB_ENABLE_SLOT 9 > +/* Disable Slot Command. */ > +#define TRB_DISABLE_SLOT 10 > +/* Address Device Command. */ > +#define TRB_ADDR_DEV 11 > +/* Configure Endpoint Command. */ > +#define TRB_CONFIG_EP 12 > +/* Evaluate Context Command. */ > +#define TRB_EVAL_CONTEXT 13 > +/* Reset Endpoint Command. */ > +#define TRB_RESET_EP 14 > +/* Stop Transfer Ring Command. */ > +#define TRB_STOP_RING 15 > +/* Set Transfer Ring Dequeue Pointer Command. */ > +#define TRB_SET_DEQ 16 > +/* Reset Device Command. */ > +#define TRB_RESET_DEV 17 > +/* Force Event Command (opt). */ > +#define TRB_FORCE_EVENT 18 > +/* Force Header Command - generate a transaction or link management packet. */ > +#define TRB_FORCE_HEADER 22 > +/* No-op Command - not for transfer rings. */ > +#define TRB_CMD_NOOP 23 > +/* TRB IDs 24-31 reserved. */ > + > +/* Event TRBS. */ > +/* Transfer Event. */ > +#define TRB_TRANSFER 32 > +/* Command Completion Event. */ > +#define TRB_COMPLETION 33 > +/* Port Status Change Event. */ > +#define TRB_PORT_STATUS 34 > +/* Device Controller Event. */ > +#define TRB_HC_EVENT 37 > +/* MFINDEX Wrap Event - microframe counter wrapped. */ > +#define TRB_MFINDEX_WRAP 39 > +/* TRB IDs 40-47 reserved. */ > +/* Endpoint Not Ready Event. */ > +#define TRB_ENDPOINT_NRDY 48 > +/* TRB IDs 49-53 reserved. */ > +/* Halt Endpoint Command. */ > +#define TRB_HALT_ENDPOINT 54 > +/* Doorbell Overflow Event. */ > +#define TRB_DRB_OVERFLOW 57 > +/* Flush Endpoint Command. */ > +#define TRB_FLUSH_ENDPOINT 58 > + > +#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) > +#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ > + cpu_to_le32(TRB_TYPE(TRB_LINK))) > +#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ > + cpu_to_le32(TRB_TYPE(TRB_TR_NOOP))) > + > +/* > + * TRBS_PER_SEGMENT must be a multiple of 4. > + * The command ring is 64-byte aligned, so it must also be greater than 16. > + */ > +#define TRBS_PER_SEGMENT 256 > +#define TRBS_PER_EVENT_SEGMENT 256 > +#define TRBS_PER_EV_DEQ_UPDATE 100 > +#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16) > +#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) > +/* TRB buffer pointers can't cross 64KB boundaries. */ > +#define TRB_MAX_BUFF_SHIFT 16 > +#define TRB_MAX_BUFF_SIZE BIT(TRB_MAX_BUFF_SHIFT) > +/* How much data is left before the 64KB boundary? */ > +#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \ > + ((addr) & (TRB_MAX_BUFF_SIZE - 1))) > + > +/** > + * struct cdnsp_segment - segment related data. > + * @trbs: Array of Transfer Request Blocks. > + * @next: Pointer to the next segment. > + * @dma: DMA address of current segment. > + * @bounce_dma: Bounce buffer DMA address . > + * @bounce_buf: Bounce buffer virtual address. > + * bounce_offs: Bounce buffer offset. > + * bounce_len: Bounce buffer length. > + */ > +struct cdnsp_segment { > + union cdnsp_trb *trbs; > + struct cdnsp_segment *next; > + dma_addr_t dma; > + /* Max packet sized bounce buffer for td-fragmant alignment */ > + dma_addr_t bounce_dma; > + void *bounce_buf; > + unsigned int bounce_offs; > + unsigned int bounce_len; > +}; > + > +/** > + * struct cdnsp_td - Transfer Descriptor object. > + * @td_list: Used for binding TD with ep_ring->td_list. > + * @preq: Request associated with this TD > + * @start_seg: Segment containing the first_trb in TD. > + * @first_trb: First TRB for this TD. > + * @last_trb: Last TRB related with TD. > + * @bounce_seg: Bounce segment for this TD. > + * @request_length_set: actual_length of the request has already been set. > + * @drbl - TD has been added to HW scheduler - only for stream capable > + * endpoints. > + */ > +struct cdnsp_td { > + struct list_head td_list; > + struct cdnsp_request *preq; > + struct cdnsp_segment *start_seg; > + union cdnsp_trb *first_trb; > + union cdnsp_trb *last_trb; > + struct cdnsp_segment *bounce_seg; > + bool request_length_set; > + bool drbl; > +}; > + > +/** > + * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring. > + * @new_deq_seg: New dequeue segment. > + * @new_deq_ptr: New dequeue pointer. > + * @new_cycle_state: New cycle state. > + * @stream_id: stream id for which new dequeue pointer has been selected. > + */ > +struct cdnsp_dequeue_state { > + struct cdnsp_segment *new_deq_seg; > + union cdnsp_trb *new_deq_ptr; > + int new_cycle_state; > + unsigned int stream_id; > +}; > + > +enum cdnsp_ring_type { > + TYPE_CTRL = 0, > + TYPE_ISOC, > + TYPE_BULK, > + TYPE_INTR, > + TYPE_STREAM, > + TYPE_COMMAND, > + TYPE_EVENT, > +}; > + > +/** > + * struct cdnsp_ring - information describing transfer, command or event ring. > + * @first_seg: First segment on transfer ring. > + * @last_seg: Last segment on transfer ring. > + * @enqueue: SW enqueue pointer address. > + * @enq_seg: SW enqueue segment address. > + * @dequeue: SW dequeue pointer address. > + * @deq_seg: SW dequeue segment address. > + * @td_list: transfer descriptor list associated with this ring. > + * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle > + * field to give ownership of the TRB to the device controller > + * (if we are the producer) or to check if we own the TRB > + * (if we are the consumer). > + * @stream_id: Stream id > + * @stream_active: Stream is active - PRIME packet has been detected. > + * @stream_rejected: This ring has been rejected by host. > + * @num_tds: Number of TDs associated with ring. > + * @num_segs: Number of segments. > + * @num_trbs_free: Number of free TRBs on the ring. > + * @bounce_buf_len: Length of bounce buffer. > + * @type: Ring type - event, transfer, or command ring. > + * @last_td_was_short - TD is short TD. > + * @trb_address_map: For mapping physical TRB addresses to segments in > + * stream rings. > + */ > +struct cdnsp_ring { > + struct cdnsp_segment *first_seg; > + struct cdnsp_segment *last_seg; > + union cdnsp_trb *enqueue; > + struct cdnsp_segment *enq_seg; > + union cdnsp_trb *dequeue; > + struct cdnsp_segment *deq_seg; > + struct list_head td_list; > + u32 cycle_state; > + unsigned int stream_id; > + unsigned int stream_active; > + unsigned int stream_rejected; > + int num_tds; > + unsigned int num_segs; > + unsigned int num_trbs_free; > + unsigned int bounce_buf_len; > + enum cdnsp_ring_type type; > + bool last_td_was_short; > + struct radix_tree_root *trb_address_map; > +}; > + > +/** > + * struct cdnsp_erst_entry - even ring segment table entry object. > + * @seg_addr: 64-bit event ring segment address. > + * seg_size: Number of TRBs in segment.; > + */ > +struct cdnsp_erst_entry { > + __le64 seg_addr; > + __le32 seg_size; > + /* Set to zero */ > + __le32 rsvd; > +}; > + > +/** > + * struct cdnsp_erst - even ring segment table for event ring. > + * @entries: Array of event ring segments > + * @num_entries: Number of segments in entries array. > + * @erst_dma_addr: DMA address for entries array. > + */ > +struct cdnsp_erst { > + struct cdnsp_erst_entry *entries; > + unsigned int num_entries; > + dma_addr_t erst_dma_addr; > +}; > + > +/** > + * struct cdnsp_request - extended device side representation of usb_request > + * object . > + * @td: Transfer descriptor associated with this request. > + * @request: Generic usb_request object describing single I/O request. > + * @list: Used to adding request to endpoint pending_list. > + * @pep: Extended representation of usb_ep object > + * @epnum: Endpoint number associated with usb request. > + * @direction: Endpoint direction for usb request. > + */ > +struct cdnsp_request { > + struct cdnsp_td td; > + struct usb_request request; > + struct list_head list; > + struct cdnsp_ep *pep; > + u8 epnum; > + unsigned direction:1; > +}; > + > +#define ERST_NUM_SEGS 1 > + > +/* Stages used during enumeration process.*/ > +enum cdnsp_ep0_stage { > + CDNSP_SETUP_STAGE, > + CDNSP_DATA_STAGE, > + CDNSP_STATUS_STAGE, > +}; > + > +/** > + * struct cdnsp_port - holds information about detected ports. > + * @port_num: Port number. > + * @exist: Indicate if port exist. > + * maj_rev: Major revision. > + * min_rev: Minor revision. > + */ > +struct cdnsp_port { > + struct cdnsp_port_regs __iomem *regs; > + u8 port_num; > + u8 exist; > + u8 maj_rev; > + u8 min_rev; > +}; > + > +#define CDNSP_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) > +#define CDNSP_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) > +#define CDNSP_EXT_PORT_OFF(x) ((x) & 0xff) > +#define CDNSP_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) > + > +/** > + * struct cdnsp_device - represent USB device. > + * @dev: Pointer to device structure associated whit this controller. > + * @gadget: Device side representation of the peripheral controller. > + * @gadget_driver: Pointer to the gadget driver. > + * @irq: IRQ line number used by device side. > + * @regs:IO device memory. > + * @cap_regs: Capability registers. > + * @op_regs: Operational registers. > + * @run_regs: Runtime registers. > + * @dba: Device base address register. > + * @ir_set: Current interrupter register set. > + * @port20_regs: Port 2.0 Peripheral Configuration Registers. > + * @port3x_regs: USB3.x Port Peripheral Configuration Registers. > + * @hcs_params1: Cached register copies of read-only HCSPARAMS1 > + * @hcc_params: Cached register copies of read-only HCCPARAMS1 > + * @rev_cap: Controller capability. > + * @setup: Temporary buffer for setup packet. > + * @ep0_preq: Internal allocated request used during enumeration. > + * @ep0_stage: ep0 stage during enumeration process. > + * @three_stage_setup: Three state or two state setup. > + * @ep0_expect_in: Data IN expected for control transfer. > + * @setup_id: Setup identifier. > + * @setup_speed - Speed detected for current SETUP packet. > + * @setup_buf: Buffer for SETUP packet. > + * @device_address: Current device address. > + * @may_wakeup: remote wakeup enabled/disabled. > + * @lock: Lock used in interrupt thread context. > + * @hci_version: device controller version. > + * @dcbaa: Device context base address array. > + * @cmd_ring: Command ring. > + * @cmd: Represent all what is needed to issue command on Command Ring. > + * @event_ring: Event ring. > + * @erst: Event Ring Segment table > + * @slot_id: Current Slot ID. Should be 0 or 1. > + * @out_ctx: Output context. > + * @in_ctx: Input context. > + * @eps: array of endpoints object associated with device. > + * @usb2_hw_lpm_capable: hardware lpm is enabled; > + * @u1_allowed: Allow device transition to U1 state. > + * @u2_allowed: Allow device transition to U2 state > + * @device_pool: DMA pool for allocating input and output context. > + * @segment_pool: DMA pool for allocating new segments. > + * @cdnsp_state: Current state of controller. > + * @link_state: Current link state. > + * @usb2_port - Port USB 2.0. > + * @usb3_port - Port USB 3.0. > + * @active_port - Current selected Port. > + * @test_mode: selected Test Mode. > + */ > +struct cdnsp_device { > + struct device *dev; > + struct usb_gadget gadget; > + struct usb_gadget_driver *gadget_driver; > + unsigned int irq; > + void __iomem *regs; > + > + /* Registers map */ > + struct cdnsp_cap_regs __iomem *cap_regs; > + struct cdnsp_op_regs __iomem *op_regs; > + struct cdnsp_run_regs __iomem *run_regs; > + struct cdnsp_doorbell_array __iomem *dba; > + struct cdnsp_intr_reg __iomem *ir_set; > + struct cdnsp_20port_cap __iomem *port20_regs; > + struct cdnsp_3xport_cap __iomem *port3x_regs; > + > + /* Cached register copies of read-only CDNSP data */ > + __u32 hcs_params1; > + __u32 hcs_params3; > + __u32 hcc_params; > + struct cdnsp_rev_cap rev_cap; > + /* Lock used in interrupt thread context. */ > + spinlock_t lock; > + struct usb_ctrlrequest setup; > + struct cdnsp_request ep0_preq; > + enum cdnsp_ep0_stage ep0_stage; > + u8 three_stage_setup; > + u8 ep0_expect_in; > + u8 setup_id; > + u8 setup_speed; > + void *setup_buf; > + u8 device_address; > + int may_wakeup; > + u16 hci_version; > + > + /* data structures */ > + struct cdnsp_device_context_array *dcbaa; > + struct cdnsp_ring *cmd_ring; > + struct cdnsp_command cmd; > + struct cdnsp_ring *event_ring; > + struct cdnsp_erst erst; > + int slot_id; > + > + /* > + * Commands to the hardware are passed an "input context" that > + * tells the hardware what to change in its data structures. > + * The hardware will return changes in an "output context" that > + * software must allocate for the hardware. . > + */ > + struct cdnsp_container_ctx out_ctx; > + struct cdnsp_container_ctx in_ctx; > + struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM]; > + u8 usb2_hw_lpm_capable:1; > + u8 u1_allowed:1; > + u8 u2_allowed:1; > + > + /* DMA pools */ > + struct dma_pool *device_pool; > + struct dma_pool *segment_pool; > + > +#define CDNSP_STATE_HALTED BIT(1) > +#define CDNSP_STATE_DYING BIT(2) > +#define CDNSP_STATE_DISCONNECT_PENDING BIT(3) > +#define CDNSP_WAKEUP_PENDING BIT(4) > + unsigned int cdnsp_state; > + unsigned int link_state; > + > + struct cdnsp_port usb2_port; > + struct cdnsp_port usb3_port; > + struct cdnsp_port *active_port; > + u16 test_mode; > +}; > + > +#endif /* __LINUX_CDNSP_GADGET_H */ > -- > 2.17.1 >
Hi, >On 20-11-06 12:42:56, Pawel Laszczak wrote: >> Patch defines macros, registers and structures used by >> Device side driver. >> >> Because the size of main patch is very big, I’ve decided to create >> separate patch for cdnsp-gadget.h. It should simplify reviewing the code. >> >> Signed-off-by: Pawel Laszczak <pawell@cadence.com> >> --- >> drivers/usb/cdns3/cdnsp-gadget.h | 1463 ++++++++++++++++++++++++++++++ >> 1 file changed, 1463 insertions(+) >> create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h >> >> diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h >> new file mode 100644 >> index 000000000000..29d5e2d00879 >> --- /dev/null >> +++ b/drivers/usb/cdns3/cdnsp-gadget.h >> @@ -0,0 +1,1463 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Cadence CDNSP DRD Driver. >> + * >> + * Copyright (C) 2020 Cadence. >> + * >> + * Author: Pawel Laszczak <pawell@cadence.com> >> + * >> + * Code based on Linux XHCI driver. >> + * Origin: Copyright (C) 2008 Intel Corp. >> + */ >> +#ifndef __LINUX_CDNSP_GADGET_H >> +#define __LINUX_CDNSP_GADGET_H >> + >> +#include <linux/io-64-nonatomic-lo-hi.h> >> +#include <linux/usb/gadget.h> >> +#include <linux/irq.h> >> + >> +/* Max number slots - only 1 is allowed. */ >> +#define CDNSP_DEV_MAX_SLOTS 1 >> + >> +#define CDNSP_EP0_SETUP_SIZE 512 >> + >> +/*16 for in and 16 for out. */ >> +#define CDNSP_ENDPOINTS_NUM 32 >> + >> +/* Best Effort Service Latency. */ >> +#define CDNSP_DEFAULT_BESL 0 >> + >> +/* Device Controller command default timeout value in us */ >> +#define CDNSP_CMD_TIMEOUT (15 * 1000) >> + >> +/* Up to 16 ms to halt an device controller */ >> +#define CDNSP_MAX_HALT_USEC (16 * 1000) >> + >> +#define CDNSP_CTX_SIZE 2112 >> + >> +/* >> + * Controller register interface. >> + */ >> + >> +/** >> + * struct cdnsp_cap_regs - CDNSP Registers. >> + * @hc_capbase: Length of the capabilities register and controller >> + * version number >> + * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 >> + * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 >> + * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 >> + * @hcc_params: HCCPARAMS - Capability Parameters >> + * @db_off: DBOFF - Doorbell array offset >> + * @run_regs_off: RTSOFF - Runtime register space offset >> + * @hcc_params2: HCCPARAMS2 Capability Parameters 2, >> + */ >> +struct cdnsp_cap_regs { >> + __le32 hc_capbase; >> + __le32 hcs_params1; >> + __le32 hcs_params2; >> + __le32 hcs_params3; >> + __le32 hcc_params; >> + __le32 db_off; >> + __le32 run_regs_off; >> + __le32 hcc_params2; >> + /* Reserved up to (CAPLENGTH - 0x1C) */ >> +}; >> + >> +/* hc_capbase bitmasks. */ >> +/* bits 7:0 - how long is the Capabilities register. */ >> +#define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0)) >> +/* bits 31:16 */ >> +#define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1)) >> + >> +/* HCSPARAMS1 - hcs_params1 - bitmasks */ >> +/* bits 0:7, Max Device Endpoints */ >> +#define HCS_ENDPOINTS_MASK GENMASK(7, 0) >> +#define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0) >> + >> +/* HCCPARAMS offset from PCI base address */ >> +#define HCC_PARAMS_OFFSET 0x10 >> + >> +/* HCCPARAMS - hcc_params - bitmasks */ >> +/* true: device controller can use 64-bit address pointers. */ > >What does "true" mean at above comment? I understand that it's ambiguous. True is not always equal 1. I will replace it with 1. Thanks for review. <snip> -- Regards, Pawel
diff --git a/drivers/usb/cdns3/cdnsp-gadget.h b/drivers/usb/cdns3/cdnsp-gadget.h new file mode 100644 index 000000000000..29d5e2d00879 --- /dev/null +++ b/drivers/usb/cdns3/cdnsp-gadget.h @@ -0,0 +1,1463 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Cadence CDNSP DRD Driver. + * + * Copyright (C) 2020 Cadence. + * + * Author: Pawel Laszczak <pawell@cadence.com> + * + * Code based on Linux XHCI driver. + * Origin: Copyright (C) 2008 Intel Corp. + */ +#ifndef __LINUX_CDNSP_GADGET_H +#define __LINUX_CDNSP_GADGET_H + +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/usb/gadget.h> +#include <linux/irq.h> + +/* Max number slots - only 1 is allowed. */ +#define CDNSP_DEV_MAX_SLOTS 1 + +#define CDNSP_EP0_SETUP_SIZE 512 + +/*16 for in and 16 for out. */ +#define CDNSP_ENDPOINTS_NUM 32 + +/* Best Effort Service Latency. */ +#define CDNSP_DEFAULT_BESL 0 + +/* Device Controller command default timeout value in us */ +#define CDNSP_CMD_TIMEOUT (15 * 1000) + +/* Up to 16 ms to halt an device controller */ +#define CDNSP_MAX_HALT_USEC (16 * 1000) + +#define CDNSP_CTX_SIZE 2112 + +/* + * Controller register interface. + */ + +/** + * struct cdnsp_cap_regs - CDNSP Registers. + * @hc_capbase: Length of the capabilities register and controller + * version number + * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 + * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 + * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 + * @hcc_params: HCCPARAMS - Capability Parameters + * @db_off: DBOFF - Doorbell array offset + * @run_regs_off: RTSOFF - Runtime register space offset + * @hcc_params2: HCCPARAMS2 Capability Parameters 2, + */ +struct cdnsp_cap_regs { + __le32 hc_capbase; + __le32 hcs_params1; + __le32 hcs_params2; + __le32 hcs_params3; + __le32 hcc_params; + __le32 db_off; + __le32 run_regs_off; + __le32 hcc_params2; + /* Reserved up to (CAPLENGTH - 0x1C) */ +}; + +/* hc_capbase bitmasks. */ +/* bits 7:0 - how long is the Capabilities register. */ +#define HC_LENGTH(p) (((p) >> 00) & GENMASK(7, 0)) +/* bits 31:16 */ +#define HC_VERSION(p) (((p) >> 16) & GENMASK(15, 1)) + +/* HCSPARAMS1 - hcs_params1 - bitmasks */ +/* bits 0:7, Max Device Endpoints */ +#define HCS_ENDPOINTS_MASK GENMASK(7, 0) +#define HCS_ENDPOINTS(p) (((p) & HCS_ENDPOINTS_MASK) >> 0) + +/* HCCPARAMS offset from PCI base address */ +#define HCC_PARAMS_OFFSET 0x10 + +/* HCCPARAMS - hcc_params - bitmasks */ +/* true: device controller can use 64-bit address pointers. */ +#define HCC_64BIT_ADDR(p) ((p) & BIT(0)) +/* true: device controller uses 64-byte Device Context structures. */ +#define HCC_64BYTE_CONTEXT(p) ((p) & BIT(2)) +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15. */ +#define HCC_MAX_PSA(p) ((((p) >> 12) & 0xf) + 1) +/* Extended Capabilities pointer from PCI base. */ +#define HCC_EXT_CAPS(p) (((p) & GENMASK(31, 16)) >> 16) + +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) + +/* db_off bitmask - bits 0:1 reserved. */ +#define DBOFF_MASK GENMASK(31, 2) + +/* run_regs_off bitmask - bits 0:4 reserved. */ +#define RTSOFF_MASK GENMASK(31, 5) + +/** + * struct cdnsp_op_regs - Device Controller Operational Registers. + * @command: USBCMD - Controller command register. + * @status: USBSTS - Controller status register. + * @page_size: This indicates the page size that the device controller supports. + * If bit n is set, the controller supports a page size of 2^(n+12), + * up to a 128MB page size. 4K is the minimum page size. + * @dnctrl: DNCTRL - Device notification control register. + * @cmd_ring: CRP - 64-bit Command Ring Pointer. + * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer. + * @config_reg: CONFIG - Configure Register + * @port_reg_base: PORTSCn - base address for Port Status and Control + * Each port has a Port Status and Control register, + * followed by a Port Power Management Status and Control + * register, a Port Link Info register, and a reserved + * register. + */ +struct cdnsp_op_regs { + __le32 command; + __le32 status; + __le32 page_size; + __le32 reserved1; + __le32 reserved2; + __le32 dnctrl; + __le64 cmd_ring; + /* rsvd: offset 0x20-2F. */ + __le32 reserved3[4]; + __le64 dcbaa_ptr; + __le32 config_reg; + /* rsvd: offset 0x3C-3FF. */ + __le32 reserved4[241]; + /* port 1 registers, which serve as a base address for other ports. */ + __le32 port_reg_base; +}; + +/* Number of registers per port. */ +#define NUM_PORT_REGS 4 + +/** + * struct cdnsp_port_regs - Port Registers. + * @portsc: PORTSC - Port Status and Control Register. + * @portpmsc: PORTPMSC - Port Power Managements Status and Control Register. + * @portli: PORTLI - Port Link Info register. + */ +struct cdnsp_port_regs { + __le32 portsc; + __le32 portpmsc; + __le32 portli; + __le32 reserved; +}; + +/* + * These bits are Read Only (RO) and should be saved and written to the + * registers: 0 (connect status) and 10:13 (port speed). + * These bits are also sticky - meaning they're in the AUX well and they aren't + * changed by a hot and warm. + */ +#define CDNSP_PORT_RO (PORT_CONNECT | DEV_SPEED_MASK) + +/* + * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit: + * bits 5:8 (link state), 25:26 ("wake on" enable state) + */ +#define CDNSP_PORT_RWS (PORT_PLS_MASK | PORT_WKCONN_E | PORT_WKDISC_E) + +/* + * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect: + * bits 1 (port enable/disable), 17 ( connect changed), + * 21 (port reset changed) , 22 (Port Link State Change), + */ +#define CDNSP_PORT_RW1CS (PORT_PED | PORT_CSC | PORT_RC | PORT_PLC) + +/* USBCMD - USB command - bitmasks. */ +/* Run/Stop, controller execution - do not write unless controller is halted.*/ +#define CMD_R_S BIT(0) +/* + * Reset device controller - resets internal controller state machine and all + * registers (except PCI config regs). + */ +#define CMD_RESET BIT(1) +/* Event Interrupt Enable - a '1' allows interrupts from the controller. */ +#define CMD_INTE BIT(2) +/* + * Device System Error Interrupt Enable - get out-of-band signal for + * controller errors. + */ +#define CMD_DSEIE BIT(3) +/* device controller save/restore state. */ +#define CMD_CSS BIT(8) +#define CMD_CRS BIT(9) +/* + * Enable Wrap Event - '1' means device controller generates an event + * when MFINDEX wraps. + */ +#define CMD_EWE BIT(10) +/*bit 13 CEM Enable (CME) */ +#define CMD_DEVEN BIT(17) +/* bits 16:31 are reserved (and should be preserved on writes). */ + +/* Command register values to disable interrupts. */ +#define CDNSP_IRQS (CMD_INTE | CMD_DSEIE | CMD_EWE) + +/* USBSTS - USB status - bitmasks */ +/* controller not running - set to 1 when run/stop bit is cleared. */ +#define STS_HALT BIT(0) +/* + * serious error, e.g. PCI parity error. The controller will clear + * the run/stop bit. + */ +#define STS_FATAL BIT(2) +/* event interrupt - clear this prior to clearing any IP flags in IR set.*/ +#define STS_EINT BIT(3) +/* port change detect */ +#define STS_PCD BIT(4) +/* save state status - '1' means device controller is saving state. */ +#define STS_SSS BIT(8) +/* restore state status - '1' means controllers is restoring state. */ +#define STS_RSS BIT(9) +/* true: save or restore error */ +#define STS_SRE BIT(10) +/* true: device Not Ready to accept doorbell or op reg writes after reset. */ +#define STS_CNR BIT(11) +/* true: internal Device Controller Error.*/ +#define STS_HCE BIT(12) + +/* CRCR - Command Ring Control Register - cmd_ring bitmasks. */ +/* bit 0 is the command ring cycle state. */ +#define CMD_RING_CS BIT(0) +/* stop ring immediately - abort the currently executing command. */ +#define CMD_RING_ABORT BIT(2) +/* + * Command Ring Busy. + * Set when Doorbell register is written with DB for command and cleared when + * the controller reached end of CR. + */ +#define CMD_RING_BUSY(p) ((p) & BIT(4)) +/* true: command ring is running */ +#define CMD_RING_RUNNING BIT(3) +/* Command Ring pointer - bit mask for the lower 32 bits. */ +#define CMD_RING_RSVD_BITS GENMASK(5, 0) + +/* CONFIG - Configure Register - config_reg bitmasks. */ +/* bits 0:7 - maximum number of device slots enabled. */ +#define MAX_DEVS GENMASK(7, 0) +/* bit 8: U3 Entry Enabled, assert PLC when controller enters U3. */ +#define CONFIG_U3E BIT(8) + +/* PORTSC - Port Status and Control Register - port_reg_base bitmasks */ +/* true: device connected. */ +#define PORT_CONNECT BIT(0) +/* true: port enabled. */ +#define PORT_PED BIT(1) +/* true: port reset signaling asserted. */ +#define PORT_RESET BIT(4) +/* + * Port Link State - bits 5:8 + * A read gives the current link PM state of the port, + * a write with Link State Write Strobe set sets the link state. + */ +#define PORT_PLS_MASK GENMASK(8, 5) +#define XDEV_U0 (0x0 << 5) +#define XDEV_U1 (0x1 << 5) +#define XDEV_U2 (0x2 << 5) +#define XDEV_U3 (0x3 << 5) +#define XDEV_DISABLED (0x4 << 5) +#define XDEV_RXDETECT (0x5 << 5) +#define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_RECOVERY (0x8 << 5) +#define XDEV_HOT_RESET (0x9 << 5) +#define XDEV_COMP_MODE (0xa << 5) +#define XDEV_TEST_MODE (0xb << 5) +#define XDEV_RESUME (0xf << 5) +/* true: port has power. */ +#define PORT_POWER BIT(9) +/* + * bits 10:13 indicate device speed: + * 0 - undefined speed - port hasn't be initialized by a reset yet + * 1 - full speed + * 2 - Reserved (Low Speed not supported + * 3 - high speed + * 4 - super speed + * 5 - super speed + * 6-15 reserved + */ +#define DEV_SPEED_MASK GENMASK(13, 10) +#define XDEV_FS (0x1 << 10) +#define XDEV_HS (0x3 << 10) +#define XDEV_SS (0x4 << 10) +#define XDEV_SSP (0x5 << 10) +#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0 << 10)) +#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) +#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) +#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) +#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) +#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) +#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) +/* Port Link State Write Strobe - set this when changing link state */ +#define PORT_LINK_STROBE BIT(16) +/* true: connect status change */ +#define PORT_CSC BIT(17) +/* true: warm reset for a USB 3.0 device is done. */ +#define PORT_WRC BIT(19) +/* true: reset change - 1 to 0 transition of PORT_RESET */ +#define PORT_RC BIT(21) +/* + * port link status change - set on some port link state transitions: + * Transition Reason + * ---------------------------------------------------------------------------- + * - U3 to Resume Wakeup signaling from a device + * - Resume to Recovery to U0 USB 3.0 device resume + * - Resume to U0 USB 2.0 device resume + * - U3 to Recovery to U0 Software resume of USB 3.0 device complete + * - U3 to U0 Software resume of USB 2.0 device complete + * - U2 to U0 L1 resume of USB 2.1 device complete + * - U0 to U0 L1 entry rejection by USB 2.1 device + * - U0 to disabled L1 entry error with USB 2.1 device + * - Any state to inactive Error on USB 3.0 port + */ +#define PORT_PLC BIT(22) +/* Port configure error change - port failed to configure its link partner. */ +#define PORT_CEC BIT(23) +/* Wake on connect (enable). */ +#define PORT_WKCONN_E BIT(25) +/* Wake on disconnect (enable). */ +#define PORT_WKDISC_E BIT(26) +/* Indicates if Warm Reset is being received. */ +#define PORT_WR BIT(31) + +#define PORT_CHANGE_BITS (PORT_CSC | PORT_WRC | PORT_RC | PORT_PLC | PORT_CEC) + +/* PORTPMSCUSB3 - Port Power Management Status and Control - bitmasks. */ +/* Enables U1 entry. */ +#define PORT_U1_TIMEOUT_MASK GENMASK(7, 0) +#define PORT_U1_TIMEOUT(p) ((p) & PORT_U1_TIMEOUT_MASK) +/* Enables U2 entry .*/ +#define PORT_U2_TIMEOUT_MASK GENMASK(14, 8) +#define PORT_U2_TIMEOUT(p) (((p) << 8) & PORT_U2_TIMEOUT_MASK) + +/* PORTPMSCUSB2 - Port Power Management Status and Control - bitmasks. */ +#define PORT_L1S_MASK GENMASK(2, 0) +#define PORT_L1S(p) ((p) & PORT_L1S_MASK) +#define PORT_L1S_ACK PORT_L1S(1) +#define PORT_L1S_NYET PORT_L1S(2) +#define PORT_L1S_STALL PORT_L1S(3) +#define PORT_L1S_TIMEOUT PORT_L1S(4) +/* Remote Wake Enable. */ +#define PORT_RWE BIT(3) +/* Best Effort Service Latency (BESL). */ +#define PORT_BESL(p) (((p) << 4) & GENMASK(7, 4)) +/* Hardware LPM Enable (HLE). */ +#define PORT_HLE BIT(16) +/* Received Best Effort Service Latency (BESL). */ +#define PORT_RRBESL(p) (((p) & GENMASK(20, 17)) >> 17) +/* Port Test Control. */ +#define PORT_TEST_MODE_MASK GENMASK(31, 28) +#define PORT_TEST_MODE(p) (((p) << 28) & PORT_TEST_MODE_MASK) + +/** + * struct cdnsp_intr_reg - Interrupt Register Set. + * @irq_pending: IMAN - Interrupt Management Register. Used to enable + * interrupts and check for pending interrupts. + * @irq_control: IMOD - Interrupt Moderation Register. + * Used to throttle interrupts. + * @erst_size: Number of segments in the Event Ring Segment Table (ERST). + * @erst_base: ERST base address. + * @erst_dequeue: Event ring dequeue pointer. + * + * Each interrupter (defined by a MSI-X vector) has an event ring and an Event + * Ring Segment Table (ERST) associated with it. The event ring is comprised of + * multiple segments of the same size. The controller places events on the ring + * and "updates the Cycle bit in the TRBs to indicate to software the current + * position of the Enqueue Pointer." The driver processes those events and + * updates the dequeue pointer. + */ +struct cdnsp_intr_reg { + __le32 irq_pending; + __le32 irq_control; + __le32 erst_size; + __le32 rsvd; + __le64 erst_base; + __le64 erst_dequeue; +}; + +/* IMAN - Interrupt Management Register - irq_pending bitmasks l. */ +#define IMAN_IE BIT(1) +#define IMAN_IP BIT(0) +/* bits 2:31 need to be preserved */ +#define IMAN_IE_SET(p) (((p) & IMAN_IE) | 0x2) +#define IMAN_IE_CLEAR(p) (((p) & IMAN_IE) & ~(0x2)) + +/* IMOD - Interrupter Moderation Register - irq_control bitmasks. */ +/* + * Minimum interval between interrupts (in 250ns intervals). The interval + * between interrupts will be longer if there are no events on the event ring. + * Default is 4000 (1 ms). + */ +#define IMOD_INTERVAL_MASK GENMASK(15, 0) +/* Counter used to count down the time to the next interrupt - HW use only */ +#define IMOD_COUNTER_MASK GENMASK(31, 16) +#define IMOD_DEFAULT_INTERVAL 0 + +/* erst_size bitmasks. */ +/* Preserve bits 16:31 of erst_size. */ +#define ERST_SIZE_MASK GENMASK(31, 16) + +/* erst_dequeue bitmasks. */ +/* + * Dequeue ERST Segment Index (DESI) - Segment number (or alias) + * where the current dequeue pointer lies. This is an optional HW hint. + */ +#define ERST_DESI_MASK GENMASK(2, 0) +/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced. */ +#define ERST_EHB BIT(3) +#define ERST_PTR_MASK GENMASK(3, 0) + +/** + * struct cdnsp_run_regs + * @microframe_index: MFINDEX - current microframe number. + * @ir_set: Array of Interrupter registers. + * + * Device Controller Runtime Registers: + * "Software should read and write these registers using only Dword (32 bit) + * or larger accesses" + */ +struct cdnsp_run_regs { + __le32 microframe_index; + __le32 rsvd[7]; + struct cdnsp_intr_reg ir_set[128]; +}; + +/** + * USB2.0 Port Peripheral Configuration Registers. + * @ext_cap: Header register for Extended Capability. + * @port_reg1: Timer Configuration Register. + * @port_reg2: Timer Configuration Register. + * @port_reg3: Timer Configuration Register. + * @port_reg4: Timer Configuration Register. + * @port_reg5: Timer Configuration Register. + * @port_reg6: Chicken bits for USB20PPP. + */ +struct cdnsp_20port_cap { + __le32 ext_cap; + __le32 port_reg1; + __le32 port_reg2; + __le32 port_reg3; + __le32 port_reg4; + __le32 port_reg5; + __le32 port_reg6; +}; + +/* Extended capability register fields */ +#define EXT_CAPS_ID(p) (((p) >> 0) & GENMASK(7, 0)) +#define EXT_CAPS_NEXT(p) (((p) >> 8) & GENMASK(7, 0)) +/* Extended capability IDs - ID 0 reserved */ +#define EXT_CAPS_PROTOCOL 2 + +/* USB 2.0 Port Peripheral Configuration Extended Capability */ +#define EXT_CAP_CFG_DEV_20PORT_CAP_ID 0xC1 +/* + * Setting this bit to '1' enables automatic wakeup from L1 state on transfer + * TRB prepared when USBSSP operates in USB2.0 mode. + */ +#define PORT_REG6_L1_L0_HW_EN BIT(1) +/* + * Setting this bit to '1' forces Full Speed when USBSSP operates in USB2.0 + * mode (disables High Speed). + */ +#define PORT_REG6_FORCE_FS BIT(0) + +/** + * USB3.x Port Peripheral Configuration Registers. + * @ext_cap: Header register for Extended Capability. + * @mode_addr: Miscellaneous 3xPORT operation mode configuration register. + * @mode_2: 3x Port Control Register 2. + */ +struct cdnsp_3xport_cap { + __le32 ext_cap; + __le32 mode_addr; + __le32 reserved[52]; + __le32 mode_2; +}; + +/* Extended Capability Header for 3XPort Configuration Registers. */ +#define D_XEC_CFG_3XPORT_CAP 0xC0 +#define CFG_3XPORT_SSP_SUPPORT BIT(31) +#define CFG_3XPORT_U1_PIPE_CLK_GATE_EN BIT(0) + +/* Revision Extended Capability ID */ +#define RTL_REV_CAP 0xC4 +#define RTL_REV_CAP_RX_BUFF_CMD_SIZE BITMASK(31, 24) +#define RTL_REV_CAP_RX_BUFF_SIZE BITMASK(15, 0) +#define RTL_REV_CAP_TX_BUFF_CMD_SIZE BITMASK(31, 24) +#define RTL_REV_CAP_TX_BUFF_SIZE BITMASK(15, 0) + +#define CDNSP_VER_1 0x00000000 +#define CDNSP_VER_2 0x10000000 + +#define CDNSP_IF_EP_EXIST(pdev, ep_num, dir) ((pdev)->rev_cap.ep_supported & \ + (BIT(ep_num) << ((dir) ? 0 : 16))) + +/** + * struct cdnsp_rev_cap - controller capabilities . + * @ext_cap: Header for RTL Revision Extended Capability. + * @rtl_revision: RTL revision. + * @rx_buff_size: Rx buffer sizes. + * @tx_buff_size: Tx buffer sizes. + * @ep_supported: Supported endpoints. + * @ctrl_revision: Controller revision ID. + */ +struct cdnsp_rev_cap { + __le32 ext_cap; + __le32 rtl_revision; + __le32 rx_buff_size; + __le32 tx_buff_size; + __le32 ep_supported; + __le32 ctrl_revision; +}; + +/* USB2.0 Port Peripheral Configuration Registers. */ +#define D_XEC_PRE_REGS_CAP 0xC8 +#define REG_CHICKEN_BITS_2_OFFSET 0x48 +#define CHICKEN_XDMA_2_TP_CACHE_DIS BIT(28) + +/* XBUF Extended Capability ID. */ +#define XBUF_CAP_ID 0xCB +#define XBUF_RX_TAG_MASK_0_OFFSET 0x1C +#define XBUF_RX_TAG_MASK_1_OFFSET 0x24 +#define XBUF_TX_CMD_OFFSET 0x2C + +/** + * struct cdnsp_doorbell_array. + * @cmd_db: Command ring doorbell register. + * @ep_db: Endpoint ring doorbell register. + * Bits 0 - 7: Endpoint target. + * Bits 8 - 15: RsvdZ. + * Bits 16 - 31: Stream ID. + */ +struct cdnsp_doorbell_array { + __le32 cmd_db; + __le32 ep_db; +}; + +#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) +#define DB_VALUE_EP0_OUT(ep, stream) ((ep) & 0xff) +#define DB_VALUE_CMD 0x00000000 + +/** + * struct cdnsp_container_ctx. + * @type: Type of context. Used to calculated offsets to contained contexts. + * @size: Size of the context data. + * @ctx_size: context data structure size - 64 or 32 bits. + * @dma: dma address of the bytes. + * @bytes: The raw context data given to HW. + * + * Represents either a Device or Input context. Holds a pointer to the raw + * memory used for the context (bytes) and dma address of it (dma). + */ +struct cdnsp_container_ctx { + unsigned int type; +#define CDNSP_CTX_TYPE_DEVICE 0x1 +#define CDNSP_CTX_TYPE_INPUT 0x2 + int size; + int ctx_size; + dma_addr_t dma; + u8 *bytes; +}; + +/** + * struct cdnsp_slot_ctx + * @dev_info: Device speed, and last valid endpoint. + * @dev_port: Device port number that is needed to access the USB device. + * @int_target: Interrupter target number. + * @dev_state: Slot state and device address. + * + * Slot Context - This assumes the controller uses 32-byte context + * structures. If the controller uses 64-byte contexts, there is an additional + * 32 bytes reserved at the end of the slot context for controller internal use. + */ +struct cdnsp_slot_ctx { + __le32 dev_info; + __le32 dev_port; + __le32 int_target; + __le32 dev_state; + /* offset 0x10 to 0x1f reserved for controller internal use. */ + __le32 reserved[4]; +}; + +/* Bits 20:23 in the Slot Context are the speed for the device. */ +#define SLOT_SPEED_FS (XDEV_FS << 10) +#define SLOT_SPEED_HS (XDEV_HS << 10) +#define SLOT_SPEED_SS (XDEV_SS << 10) +#define SLOT_SPEED_SSP (XDEV_SSP << 10) + +/* dev_info bitmasks. */ +/* Device speed - values defined by PORTSC Device Speed field - 20:23. */ +#define DEV_SPEED GENMASK(23, 20) +#define GET_DEV_SPEED(n) (((n) & DEV_SPEED) >> 20) +/* Index of the last valid endpoint context in this device context - 27:31. */ +#define LAST_CTX_MASK GENMASK(31, 27) +#define LAST_CTX(p) ((p) << 27) +#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1) +#define SLOT_FLAG BIT(0) +#define EP0_FLAG BIT(1) + +/* dev_port bitmasks */ +/* Device port number that is needed to access the USB device. */ +#define DEV_PORT(p) (((p) & 0xff) << 16) + +/* dev_state bitmasks */ +/* USB device address - assigned by the controller. */ +#define DEV_ADDR_MASK GENMASK(7, 0) +/* Slot state */ +#define SLOT_STATE GENMASK(31, 27) +#define GET_SLOT_STATE(p) (((p) & SLOT_STATE) >> 27) + +#define SLOT_STATE_DISABLED 0 +#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED +#define SLOT_STATE_DEFAULT 1 +#define SLOT_STATE_ADDRESSED 2 +#define SLOT_STATE_CONFIGURED 3 + +/** + * struct cdnsp_ep_ctx. + * @ep_info: Endpoint state, streams, mult, and interval information. + * @ep_info2: Information on endpoint type, max packet size, max burst size, + * error count, and whether the controller will force an event for + * all transactions. + * @deq: 64-bit ring dequeue pointer address. If the endpoint only + * defines one stream, this points to the endpoint transfer ring. + * Otherwise, it points to a stream context array, which has a + * ring pointer for each flow. + * @tx_info: Average TRB lengths for the endpoint ring and + * max payload within an Endpoint Service Interval Time (ESIT). + * + * Endpoint Context - This assumes the controller uses 32-byte context + * structures. If the controller uses 64-byte contexts, there is an additional + * 32 bytes reserved at the end of the endpoint context for controller internal + * use. + */ +struct cdnsp_ep_ctx { + __le32 ep_info; + __le32 ep_info2; + __le64 deq; + __le32 tx_info; + /* offset 0x14 - 0x1f reserved for controller internal use. */ + __le32 reserved[3]; +}; + +/* ep_info bitmasks. */ +/* + * Endpoint State - bits 0:2: + * 0 - disabled + * 1 - running + * 2 - halted due to halt condition + * 3 - stopped + * 4 - TRB error + * 5-7 - reserved + */ +#define EP_STATE_MASK GENMASK(3, 0) +#define EP_STATE_DISABLED 0 +#define EP_STATE_RUNNING 1 +#define EP_STATE_HALTED 2 +#define EP_STATE_STOPPED 3 +#define EP_STATE_ERROR 4 +#define GET_EP_CTX_STATE(ctx) (le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK) + +/* Mult - Max number of burst within an interval, in EP companion desc. */ +#define EP_MULT(p) (((p) << 8) & GENMASK(9, 8)) +#define CTX_TO_EP_MULT(p) (((p) & GENMASK(9, 8)) >> 8) +/* bits 10:14 are Max Primary Streams. */ +/* bit 15 is Linear Stream Array. */ +/* Interval - period between requests to an endpoint - 125u increments. */ +#define EP_INTERVAL(p) (((p) << 16) & GENMASK(23, 16)) +#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) & GENMASK(23, 16)) >> 16)) +#define CTX_TO_EP_INTERVAL(p) (((p) & GENMASK(23, 16)) >> 16) +#define EP_MAXPSTREAMS_MASK GENMASK(14, 10) +#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) +#define CTX_TO_EP_MAXPSTREAMS(p) (((p) & EP_MAXPSTREAMS_MASK) >> 10) +/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ +#define EP_HAS_LSA BIT(15) + +/* ep_info2 bitmasks */ +#define ERROR_COUNT(p) (((p) & 0x3) << 1) +#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) +#define EP_TYPE(p) ((p) << 3) +#define ISOC_OUT_EP 1 +#define BULK_OUT_EP 2 +#define INT_OUT_EP 3 +#define CTRL_EP 4 +#define ISOC_IN_EP 5 +#define BULK_IN_EP 6 +#define INT_IN_EP 7 +/* bit 6 reserved. */ +/* bit 7 is Device Initiate Disable - for disabling stream selection. */ +#define MAX_BURST(p) (((p) << 8) & GENMASK(15, 8)) +#define CTX_TO_MAX_BURST(p) (((p) & GENMASK(15, 8)) >> 8) +#define MAX_PACKET(p) (((p) << 16) & GENMASK(31, 16)) +#define MAX_PACKET_MASK GENMASK(31, 16) +#define MAX_PACKET_DECODED(p) (((p) & GENMASK(31, 16)) >> 16) + +/* tx_info bitmasks. */ +#define EP_AVG_TRB_LENGTH(p) ((p) & GENMASK(15, 0)) +#define EP_MAX_ESIT_PAYLOAD_LO(p) (((p) << 16) & GENMASK(31, 16)) +#define EP_MAX_ESIT_PAYLOAD_HI(p) ((((p) & GENMASK(23, 16)) >> 16) << 24) +#define CTX_TO_MAX_ESIT_PAYLOAD_LO(p) (((p) & GENMASK(31, 16)) >> 16) +#define CTX_TO_MAX_ESIT_PAYLOAD_HI(p) (((p) & GENMASK(31, 24)) >> 24) + +/* deq bitmasks. */ +#define EP_CTX_CYCLE_MASK BIT(0) +#define CTX_DEQ_MASK (~0xfL) + +/** + * struct cdnsp_input_control_context + * Input control context; + * + * @drop_context: Set the bit of the endpoint context you want to disable. + * @add_context: Set the bit of the endpoint context you want to enable. + */ +struct cdnsp_input_control_ctx { + __le32 drop_flags; + __le32 add_flags; + __le32 rsvd2[6]; +}; + +/** + * Represents everything that is needed to issue a command on the command ring. + * + * @in_ctx: Pointer to input context structure. + * @status: Command Completion Code for last command. + * @command_trb: Pointer to command TRB. + */ +struct cdnsp_command { + /* Input context for changing device state. */ + struct cdnsp_container_ctx *in_ctx; + u32 status; + union cdnsp_trb *command_trb; +}; + +/** + * Stream context structure. + * + * @stream_ring: 64-bit stream ring address, cycle state, and stream type. + * @reserved: offset 0x14 - 0x1f reserved for controller internal use. + */ +struct cdnsp_stream_ctx { + __le64 stream_ring; + __le32 reserved[2]; +}; + +/* Stream Context Types - bits 3:1 of stream ctx deq ptr. */ +#define SCT_FOR_CTX(p) (((p) << 1) & GENMASK(3, 1)) +/* Secondary stream array type, dequeue pointer is to a transfer ring. */ +#define SCT_SEC_TR 0 +/* Primary stream array type, dequeue pointer is to a transfer ring. */ +#define SCT_PRI_TR 1 + +/** + * struct cdnsp_stream_info: Representing everything that is needed to + * supports stream capable endpoints. + * @stream_rings: Array of pointers containing Transfer rings for all + * supported streams. + * @num_streams: Number of streams, including stream 0. + * @stream_ctx_array: The stream context array may be bigger than the number + * of streams the driver asked for. + * @num_stream_ctxs: Number of streams. + * @ctx_array_dma: Dma address of Context Stream Array. + * @trb_address_map: For mapping physical TRB addresses to segments in + * stream rings. + * @td_count: Number of TDs associated with endpoint. + * @first_prime_det: First PRIME packet detected. + * @drbls_count: Number of allowed doorbells. + */ +struct cdnsp_stream_info { + struct cdnsp_ring **stream_rings; + unsigned int num_streams; + struct cdnsp_stream_ctx *stream_ctx_array; + unsigned int num_stream_ctxs; + dma_addr_t ctx_array_dma; + struct radix_tree_root trb_address_map; + int td_count; + u8 first_prime_det; +#define STREAM_DRBL_FIFO_DEPTH 2 + u8 drbls_count; +}; + +#define STREAM_LOG_STREAMS 4 +#define STREAM_NUM_STREAMS BIT(STREAM_LOG_STREAMS) + +#if STREAM_LOG_STREAMS > 16 && STREAM_LOG_STREAMS < 1 +#error "Not suupported stream value" +#endif + +/** + * struct cdnsp_ep - extended device side representation of USB endpoint. + * @endpoint: usb endpoint + * @pending_req_list: List of requests queuing on transfer ring. + * @pdev: Device associated with this endpoint. + * @number: Endpoint number (1 - 15). + * idx: The device context index (DCI). + * interval: Interval between packets used for ISOC endpoint. + * @name: A human readable name e.g. ep1out. + * @direction: Endpoint direction. + * @buffering: Number of on-chip buffers related to endpoint. + * @buffering_period; Number of on-chip buffers related to periodic endpoint. + * @in_ctx: Pointer to input endpoint context structure. + * @out_ctx: Pointer to output endpoint context structure. + * @ring: Pointer to transfer ring. + * @stream_info: Hold stream information. + * @ep_state: Current state of endpoint. + * skip: Sometimes the controller can not process isochronous endpoint ring + * quickly enough, and it will miss some isoc tds on the ring and + * generate Missed Service Error Event. + * Set skip flag when receive a Missed Service Error Event and + * process the missed tds on the endpoint ring. + */ +struct cdnsp_ep { + struct usb_ep endpoint; + struct list_head pending_list; + struct cdnsp_device *pdev; + u8 number; + u8 idx; + u32 interval; + char name[20]; + u8 direction; + u8 buffering; + u8 buffering_period; + struct cdnsp_ep_ctx *in_ctx; + struct cdnsp_ep_ctx *out_ctx; + struct cdnsp_ring *ring; + struct cdnsp_stream_info stream_info; + unsigned int ep_state; +#define EP_ENABLED BIT(0) +#define EP_DIS_IN_RROGRESS BIT(1) +#define EP_HALTED BIT(2) +#define EP_STOPPED BIT(3) +#define EP_WEDGE BIT(4) +#define EP0_HALTED_STATUS BIT(5) +#define EP_HAS_STREAMS BIT(6) + + bool skip; +}; + +/** + * struct cdnsp_device_context_array + * @dev_context_ptr: Array of 64-bit DMA addresses for device contexts. + * @dma: DMA address for device contexts structure. + */ +struct cdnsp_device_context_array { + __le64 dev_context_ptrs[CDNSP_DEV_MAX_SLOTS + 1]; + dma_addr_t dma; +}; + +/** + * struct cdnsp_transfer_event. + * @buffer: 64-bit buffer address, or immediate data. + * @transfer_len: Data length transferred. + * @flags: Field is interpreted differently based on the type of TRB. + */ +struct cdnsp_transfer_event { + __le64 buffer; + __le32 transfer_len; + __le32 flags; +}; + +/* Invalidate event after disabling endpoint. */ +#define TRB_EVENT_INVALIDATE 8 + +/* Transfer event TRB length bit mask. */ +/* bits 0:23 */ +#define EVENT_TRB_LEN(p) ((p) & GENMASK(23, 0)) +/* Completion Code - only applicable for some types of TRBs */ +#define COMP_CODE_MASK (0xff << 24) +#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24) +#define COMP_INVALID 0 +#define COMP_SUCCESS 1 +#define COMP_DATA_BUFFER_ERROR 2 +#define COMP_BABBLE_DETECTED_ERROR 3 +#define COMP_TRB_ERROR 5 +#define COMP_RESOURCE_ERROR 7 +#define COMP_NO_SLOTS_AVAILABLE_ERROR 9 +#define COMP_INVALID_STREAM_TYPE_ERROR 10 +#define COMP_SLOT_NOT_ENABLED_ERROR 11 +#define COMP_ENDPOINT_NOT_ENABLED_ERROR 12 +#define COMP_SHORT_PACKET 13 +#define COMP_RING_UNDERRUN 14 +#define COMP_RING_OVERRUN 15 +#define COMP_VF_EVENT_RING_FULL_ERROR 16 +#define COMP_PARAMETER_ERROR 17 +#define COMP_CONTEXT_STATE_ERROR 19 +#define COMP_EVENT_RING_FULL_ERROR 21 +#define COMP_INCOMPATIBLE_DEVICE_ERROR 22 +#define COMP_MISSED_SERVICE_ERROR 23 +#define COMP_COMMAND_RING_STOPPED 24 +#define COMP_COMMAND_ABORTED 25 +#define COMP_STOPPED 26 +#define COMP_STOPPED_LENGTH_INVALID 27 +#define COMP_STOPPED_SHORT_PACKET 28 +#define COMP_MAX_EXIT_LATENCY_TOO_LARGE_ERROR 29 +#define COMP_ISOCH_BUFFER_OVERRUN 31 +#define COMP_EVENT_LOST_ERROR 32 +#define COMP_UNDEFINED_ERROR 33 +#define COMP_INVALID_STREAM_ID_ERROR 34 + +/*Transfer Event NRDY bit fields */ +#define TRB_TO_DEV_STREAM(p) ((p) & GENMASK(16, 0)) +#define TRB_TO_HOST_STREAM(p) ((p) & GENMASK(16, 0)) +#define STREAM_PRIME_ACK 0xFFFE +#define STREAM_REJECTED 0xFFFF + +/** Transfer Event bit fields **/ +#define TRB_TO_EP_ID(p) (((p) & GENMASK(20, 16)) >> 16) + +/** + * struct cdnsp_link_trb + * @segment_ptr: 64-bit segment pointer. + * @intr_target: Interrupter target. + * @control: Flags. + */ +struct cdnsp_link_trb { + __le64 segment_ptr; + __le32 intr_target; + __le32 control; +}; + +/* control bitfields */ +#define LINK_TOGGLE BIT(1) + +/** + * struct cdnsp_event_cmd - Command completion event TRB. + * cmd_trb: Pointer to command TRB, or the value passed by the event data trb + * status: Command completion parameters and error code. + * flags: Flags. + */ +struct cdnsp_event_cmd { + __le64 cmd_trb; + __le32 status; + __le32 flags; +}; + +/* flags bitmasks */ + +/* Address device - disable SetAddress. */ +#define TRB_BSR BIT(9) + +/* Configure Endpoint - Deconfigure. */ +#define TRB_DC BIT(9) + +/* Force Header */ +#define TRB_FH_TO_PACKET_TYPE(p) ((p) & GENMASK(4, 0)) +#define TRB_FH_TR_PACKET 0x4 +#define TRB_FH_TO_DEVICE_ADDRESS(p) (((p) << 25) & GENMASK(31, 25)) +#define TRB_FH_TR_PACKET_DEV_NOT 0x6 +#define TRB_FH_TO_NOT_TYPE(p) (((p) << 4) & GENMASK(7, 4)) +#define TRB_FH_TR_PACKET_FUNCTION_WAKE 0x1 +#define TRB_FH_TO_INTERFACE(p) (((p) << 8) & GENMASK(15, 8)) + +enum cdnsp_setup_dev { + SETUP_CONTEXT_ONLY, + SETUP_CONTEXT_ADDRESS, +}; + +/* bits 24:31 are the slot ID. */ +#define TRB_TO_SLOT_ID(p) (((p) & GENMASK(31, 24)) >> 24) +#define SLOT_ID_FOR_TRB(p) (((p) << 24) & GENMASK(31, 24)) + +/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB. */ +#define TRB_TO_EP_INDEX(p) (((p) >> 16) & 0x1f) + +#define EP_ID_FOR_TRB(p) ((((p) + 1) << 16) & GENMASK(20, 16)) + +#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) +#define TRB_TO_SUSPEND_PORT(p) (((p) >> 23) & 0x1) +#define LAST_EP_INDEX 30 + +/* Set TR Dequeue Pointer command TRB fields. */ +#define TRB_TO_STREAM_ID(p) ((((p) & GENMASK(31, 16)) >> 16)) +#define STREAM_ID_FOR_TRB(p) ((((p)) << 16) & GENMASK(31, 16)) +#define SCT_FOR_TRB(p) (((p) << 1) & 0x7) + +/* Link TRB specific fields. */ +#define TRB_TC BIT(1) + +/* Port Status Change Event TRB fields. */ +/* Port ID - bits 31:24. */ +#define GET_PORT_ID(p) (((p) & GENMASK(31, 24)) >> 24) +#define SET_PORT_ID(p) (((p) << 24) & GENMASK(31, 24)) +#define EVENT_DATA BIT(2) + +/* Normal TRB fields. */ +/* transfer_len bitmasks - bits 0:16. */ +#define TRB_LEN(p) ((p) & GENMASK(16, 0)) +/* TD Size, packets remaining in this TD, bits 21:17 (5 bits, so max 31). */ +#define TRB_TD_SIZE(p) (min((p), (u32)31) << 17) +#define GET_TD_SIZE(p) (((p) & GENMASK(21, 17)) >> 17) +/* + * Controller uses the TD_SIZE field for TBC if Extended TBC + * is enabled (ETE). + */ +#define TRB_TD_SIZE_TBC(p) (min((p), (u32)31) << 17) +/* Interrupter Target - which MSI-X vector to target the completion event at. */ +#define TRB_INTR_TARGET(p) (((p) << 22) & GENMASK(31, 22)) +#define GET_INTR_TARGET(p) (((p) & GENMASK(31, 22)) >> 22) +/* + * Total burst count field, Rsvdz on controller with Extended TBC + * enabled (ETE). + */ +#define TRB_TBC(p) (((p) & 0x3) << 7) +#define TRB_TLBPC(p) (((p) & 0xf) << 16) + +/* Cycle bit - indicates TRB ownership by driver or driver.*/ +#define TRB_CYCLE BIT(0) +/* + * Force next event data TRB to be evaluated before task switch. + * Used to pass OS data back after a TD completes. + */ +#define TRB_ENT BIT(1) +/* Interrupt on short packet. */ +#define TRB_ISP BIT(2) +/* Set PCIe no snoop attribute. */ +#define TRB_NO_SNOOP BIT(3) +/* Chain multiple TRBs into a TD. */ +#define TRB_CHAIN BIT(4) +/* Interrupt on completion. */ +#define TRB_IOC BIT(5) +/* The buffer pointer contains immediate data. */ +#define TRB_IDT BIT(6) +/* 0 - NRDY during data stage, 1 - NRDY during status stage (only control). */ +#define TRB_STAT BIT(7) +/* Block Event Interrupt. */ +#define TRB_BEI BIT(9) + +/* Control transfer TRB specific fields. */ +#define TRB_DIR_IN BIT(16) + +/* TRB bit mask in Data Stage TRB */ +#define TRB_SETUPID_BITMASK GENMASK(9, 8) +#define TRB_SETUPID(p) ((p) << 8) +#define TRB_SETUPID_TO_TYPE(p) (((p) & TRB_SETUPID_BITMASK) >> 8) + +#define TRB_SETUP_SPEEDID_USB3 0x1 +#define TRB_SETUP_SPEEDID_USB2 0x0 +#define TRB_SETUP_SPEEDID(p) ((p) & (1 << 7)) + +#define TRB_SETUPSTAT_ACK 0x1 +#define TRB_SETUPSTAT_STALL 0x0 +#define TRB_SETUPSTAT(p) ((p) << 6) + +/* Isochronous TRB specific fields */ +#define TRB_SIA BIT(31) +#define TRB_FRAME_ID(p) (((p) << 20) & GENMASK(30, 20)) + +struct cdnsp_generic_trb { + __le32 field[4]; +}; + +union cdnsp_trb { + struct cdnsp_link_trb link; + struct cdnsp_transfer_event trans_event; + struct cdnsp_event_cmd event_cmd; + struct cdnsp_generic_trb generic; +}; + +/* TRB bit mask. */ +#define TRB_TYPE_BITMASK GENMASK(15, 10) +#define TRB_TYPE(p) ((p) << 10) +#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) + +/* TRB type IDs. */ +/* bulk, interrupt, isoc scatter/gather, and control data stage. */ +#define TRB_NORMAL 1 +/* Setup Stage for control transfers. */ +#define TRB_SETUP 2 +/* Data Stage for control transfers. */ +#define TRB_DATA 3 +/* Status Stage for control transfers. */ +#define TRB_STATUS 4 +/* ISOC transfers. */ +#define TRB_ISOC 5 +/* TRB for linking ring segments. */ +#define TRB_LINK 6 +#define TRB_EVENT_DATA 7 +/* Transfer Ring No-op (not for the command ring). */ +#define TRB_TR_NOOP 8 + +/* Command TRBs */ +/* Enable Slot Command. */ +#define TRB_ENABLE_SLOT 9 +/* Disable Slot Command. */ +#define TRB_DISABLE_SLOT 10 +/* Address Device Command. */ +#define TRB_ADDR_DEV 11 +/* Configure Endpoint Command. */ +#define TRB_CONFIG_EP 12 +/* Evaluate Context Command. */ +#define TRB_EVAL_CONTEXT 13 +/* Reset Endpoint Command. */ +#define TRB_RESET_EP 14 +/* Stop Transfer Ring Command. */ +#define TRB_STOP_RING 15 +/* Set Transfer Ring Dequeue Pointer Command. */ +#define TRB_SET_DEQ 16 +/* Reset Device Command. */ +#define TRB_RESET_DEV 17 +/* Force Event Command (opt). */ +#define TRB_FORCE_EVENT 18 +/* Force Header Command - generate a transaction or link management packet. */ +#define TRB_FORCE_HEADER 22 +/* No-op Command - not for transfer rings. */ +#define TRB_CMD_NOOP 23 +/* TRB IDs 24-31 reserved. */ + +/* Event TRBS. */ +/* Transfer Event. */ +#define TRB_TRANSFER 32 +/* Command Completion Event. */ +#define TRB_COMPLETION 33 +/* Port Status Change Event. */ +#define TRB_PORT_STATUS 34 +/* Device Controller Event. */ +#define TRB_HC_EVENT 37 +/* MFINDEX Wrap Event - microframe counter wrapped. */ +#define TRB_MFINDEX_WRAP 39 +/* TRB IDs 40-47 reserved. */ +/* Endpoint Not Ready Event. */ +#define TRB_ENDPOINT_NRDY 48 +/* TRB IDs 49-53 reserved. */ +/* Halt Endpoint Command. */ +#define TRB_HALT_ENDPOINT 54 +/* Doorbell Overflow Event. */ +#define TRB_DRB_OVERFLOW 57 +/* Flush Endpoint Command. */ +#define TRB_FLUSH_ENDPOINT 58 + +#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) +#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ + cpu_to_le32(TRB_TYPE(TRB_LINK))) +#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ + cpu_to_le32(TRB_TYPE(TRB_TR_NOOP))) + +/* + * TRBS_PER_SEGMENT must be a multiple of 4. + * The command ring is 64-byte aligned, so it must also be greater than 16. + */ +#define TRBS_PER_SEGMENT 256 +#define TRBS_PER_EVENT_SEGMENT 256 +#define TRBS_PER_EV_DEQ_UPDATE 100 +#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT * 16) +#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE)) +/* TRB buffer pointers can't cross 64KB boundaries. */ +#define TRB_MAX_BUFF_SHIFT 16 +#define TRB_MAX_BUFF_SIZE BIT(TRB_MAX_BUFF_SHIFT) +/* How much data is left before the 64KB boundary? */ +#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_BUFF_SIZE - \ + ((addr) & (TRB_MAX_BUFF_SIZE - 1))) + +/** + * struct cdnsp_segment - segment related data. + * @trbs: Array of Transfer Request Blocks. + * @next: Pointer to the next segment. + * @dma: DMA address of current segment. + * @bounce_dma: Bounce buffer DMA address . + * @bounce_buf: Bounce buffer virtual address. + * bounce_offs: Bounce buffer offset. + * bounce_len: Bounce buffer length. + */ +struct cdnsp_segment { + union cdnsp_trb *trbs; + struct cdnsp_segment *next; + dma_addr_t dma; + /* Max packet sized bounce buffer for td-fragmant alignment */ + dma_addr_t bounce_dma; + void *bounce_buf; + unsigned int bounce_offs; + unsigned int bounce_len; +}; + +/** + * struct cdnsp_td - Transfer Descriptor object. + * @td_list: Used for binding TD with ep_ring->td_list. + * @preq: Request associated with this TD + * @start_seg: Segment containing the first_trb in TD. + * @first_trb: First TRB for this TD. + * @last_trb: Last TRB related with TD. + * @bounce_seg: Bounce segment for this TD. + * @request_length_set: actual_length of the request has already been set. + * @drbl - TD has been added to HW scheduler - only for stream capable + * endpoints. + */ +struct cdnsp_td { + struct list_head td_list; + struct cdnsp_request *preq; + struct cdnsp_segment *start_seg; + union cdnsp_trb *first_trb; + union cdnsp_trb *last_trb; + struct cdnsp_segment *bounce_seg; + bool request_length_set; + bool drbl; +}; + +/** + * struct cdnsp_dequeue_state - New dequeue pointer for Transfer Ring. + * @new_deq_seg: New dequeue segment. + * @new_deq_ptr: New dequeue pointer. + * @new_cycle_state: New cycle state. + * @stream_id: stream id for which new dequeue pointer has been selected. + */ +struct cdnsp_dequeue_state { + struct cdnsp_segment *new_deq_seg; + union cdnsp_trb *new_deq_ptr; + int new_cycle_state; + unsigned int stream_id; +}; + +enum cdnsp_ring_type { + TYPE_CTRL = 0, + TYPE_ISOC, + TYPE_BULK, + TYPE_INTR, + TYPE_STREAM, + TYPE_COMMAND, + TYPE_EVENT, +}; + +/** + * struct cdnsp_ring - information describing transfer, command or event ring. + * @first_seg: First segment on transfer ring. + * @last_seg: Last segment on transfer ring. + * @enqueue: SW enqueue pointer address. + * @enq_seg: SW enqueue segment address. + * @dequeue: SW dequeue pointer address. + * @deq_seg: SW dequeue segment address. + * @td_list: transfer descriptor list associated with this ring. + * @cycle_state: Current cycle bit. Write the cycle state into the TRB cycle + * field to give ownership of the TRB to the device controller + * (if we are the producer) or to check if we own the TRB + * (if we are the consumer). + * @stream_id: Stream id + * @stream_active: Stream is active - PRIME packet has been detected. + * @stream_rejected: This ring has been rejected by host. + * @num_tds: Number of TDs associated with ring. + * @num_segs: Number of segments. + * @num_trbs_free: Number of free TRBs on the ring. + * @bounce_buf_len: Length of bounce buffer. + * @type: Ring type - event, transfer, or command ring. + * @last_td_was_short - TD is short TD. + * @trb_address_map: For mapping physical TRB addresses to segments in + * stream rings. + */ +struct cdnsp_ring { + struct cdnsp_segment *first_seg; + struct cdnsp_segment *last_seg; + union cdnsp_trb *enqueue; + struct cdnsp_segment *enq_seg; + union cdnsp_trb *dequeue; + struct cdnsp_segment *deq_seg; + struct list_head td_list; + u32 cycle_state; + unsigned int stream_id; + unsigned int stream_active; + unsigned int stream_rejected; + int num_tds; + unsigned int num_segs; + unsigned int num_trbs_free; + unsigned int bounce_buf_len; + enum cdnsp_ring_type type; + bool last_td_was_short; + struct radix_tree_root *trb_address_map; +}; + +/** + * struct cdnsp_erst_entry - even ring segment table entry object. + * @seg_addr: 64-bit event ring segment address. + * seg_size: Number of TRBs in segment.; + */ +struct cdnsp_erst_entry { + __le64 seg_addr; + __le32 seg_size; + /* Set to zero */ + __le32 rsvd; +}; + +/** + * struct cdnsp_erst - even ring segment table for event ring. + * @entries: Array of event ring segments + * @num_entries: Number of segments in entries array. + * @erst_dma_addr: DMA address for entries array. + */ +struct cdnsp_erst { + struct cdnsp_erst_entry *entries; + unsigned int num_entries; + dma_addr_t erst_dma_addr; +}; + +/** + * struct cdnsp_request - extended device side representation of usb_request + * object . + * @td: Transfer descriptor associated with this request. + * @request: Generic usb_request object describing single I/O request. + * @list: Used to adding request to endpoint pending_list. + * @pep: Extended representation of usb_ep object + * @epnum: Endpoint number associated with usb request. + * @direction: Endpoint direction for usb request. + */ +struct cdnsp_request { + struct cdnsp_td td; + struct usb_request request; + struct list_head list; + struct cdnsp_ep *pep; + u8 epnum; + unsigned direction:1; +}; + +#define ERST_NUM_SEGS 1 + +/* Stages used during enumeration process.*/ +enum cdnsp_ep0_stage { + CDNSP_SETUP_STAGE, + CDNSP_DATA_STAGE, + CDNSP_STATUS_STAGE, +}; + +/** + * struct cdnsp_port - holds information about detected ports. + * @port_num: Port number. + * @exist: Indicate if port exist. + * maj_rev: Major revision. + * min_rev: Minor revision. + */ +struct cdnsp_port { + struct cdnsp_port_regs __iomem *regs; + u8 port_num; + u8 exist; + u8 maj_rev; + u8 min_rev; +}; + +#define CDNSP_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define CDNSP_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) +#define CDNSP_EXT_PORT_OFF(x) ((x) & 0xff) +#define CDNSP_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + +/** + * struct cdnsp_device - represent USB device. + * @dev: Pointer to device structure associated whit this controller. + * @gadget: Device side representation of the peripheral controller. + * @gadget_driver: Pointer to the gadget driver. + * @irq: IRQ line number used by device side. + * @regs:IO device memory. + * @cap_regs: Capability registers. + * @op_regs: Operational registers. + * @run_regs: Runtime registers. + * @dba: Device base address register. + * @ir_set: Current interrupter register set. + * @port20_regs: Port 2.0 Peripheral Configuration Registers. + * @port3x_regs: USB3.x Port Peripheral Configuration Registers. + * @hcs_params1: Cached register copies of read-only HCSPARAMS1 + * @hcc_params: Cached register copies of read-only HCCPARAMS1 + * @rev_cap: Controller capability. + * @setup: Temporary buffer for setup packet. + * @ep0_preq: Internal allocated request used during enumeration. + * @ep0_stage: ep0 stage during enumeration process. + * @three_stage_setup: Three state or two state setup. + * @ep0_expect_in: Data IN expected for control transfer. + * @setup_id: Setup identifier. + * @setup_speed - Speed detected for current SETUP packet. + * @setup_buf: Buffer for SETUP packet. + * @device_address: Current device address. + * @may_wakeup: remote wakeup enabled/disabled. + * @lock: Lock used in interrupt thread context. + * @hci_version: device controller version. + * @dcbaa: Device context base address array. + * @cmd_ring: Command ring. + * @cmd: Represent all what is needed to issue command on Command Ring. + * @event_ring: Event ring. + * @erst: Event Ring Segment table + * @slot_id: Current Slot ID. Should be 0 or 1. + * @out_ctx: Output context. + * @in_ctx: Input context. + * @eps: array of endpoints object associated with device. + * @usb2_hw_lpm_capable: hardware lpm is enabled; + * @u1_allowed: Allow device transition to U1 state. + * @u2_allowed: Allow device transition to U2 state + * @device_pool: DMA pool for allocating input and output context. + * @segment_pool: DMA pool for allocating new segments. + * @cdnsp_state: Current state of controller. + * @link_state: Current link state. + * @usb2_port - Port USB 2.0. + * @usb3_port - Port USB 3.0. + * @active_port - Current selected Port. + * @test_mode: selected Test Mode. + */ +struct cdnsp_device { + struct device *dev; + struct usb_gadget gadget; + struct usb_gadget_driver *gadget_driver; + unsigned int irq; + void __iomem *regs; + + /* Registers map */ + struct cdnsp_cap_regs __iomem *cap_regs; + struct cdnsp_op_regs __iomem *op_regs; + struct cdnsp_run_regs __iomem *run_regs; + struct cdnsp_doorbell_array __iomem *dba; + struct cdnsp_intr_reg __iomem *ir_set; + struct cdnsp_20port_cap __iomem *port20_regs; + struct cdnsp_3xport_cap __iomem *port3x_regs; + + /* Cached register copies of read-only CDNSP data */ + __u32 hcs_params1; + __u32 hcs_params3; + __u32 hcc_params; + struct cdnsp_rev_cap rev_cap; + /* Lock used in interrupt thread context. */ + spinlock_t lock; + struct usb_ctrlrequest setup; + struct cdnsp_request ep0_preq; + enum cdnsp_ep0_stage ep0_stage; + u8 three_stage_setup; + u8 ep0_expect_in; + u8 setup_id; + u8 setup_speed; + void *setup_buf; + u8 device_address; + int may_wakeup; + u16 hci_version; + + /* data structures */ + struct cdnsp_device_context_array *dcbaa; + struct cdnsp_ring *cmd_ring; + struct cdnsp_command cmd; + struct cdnsp_ring *event_ring; + struct cdnsp_erst erst; + int slot_id; + + /* + * Commands to the hardware are passed an "input context" that + * tells the hardware what to change in its data structures. + * The hardware will return changes in an "output context" that + * software must allocate for the hardware. . + */ + struct cdnsp_container_ctx out_ctx; + struct cdnsp_container_ctx in_ctx; + struct cdnsp_ep eps[CDNSP_ENDPOINTS_NUM]; + u8 usb2_hw_lpm_capable:1; + u8 u1_allowed:1; + u8 u2_allowed:1; + + /* DMA pools */ + struct dma_pool *device_pool; + struct dma_pool *segment_pool; + +#define CDNSP_STATE_HALTED BIT(1) +#define CDNSP_STATE_DYING BIT(2) +#define CDNSP_STATE_DISCONNECT_PENDING BIT(3) +#define CDNSP_WAKEUP_PENDING BIT(4) + unsigned int cdnsp_state; + unsigned int link_state; + + struct cdnsp_port usb2_port; + struct cdnsp_port usb3_port; + struct cdnsp_port *active_port; + u16 test_mode; +}; + +#endif /* __LINUX_CDNSP_GADGET_H */
Patch defines macros, registers and structures used by Device side driver. Because the size of main patch is very big, I’ve decided to create separate patch for cdnsp-gadget.h. It should simplify reviewing the code. Signed-off-by: Pawel Laszczak <pawell@cadence.com> --- drivers/usb/cdns3/cdnsp-gadget.h | 1463 ++++++++++++++++++++++++++++++ 1 file changed, 1463 insertions(+) create mode 100644 drivers/usb/cdns3/cdnsp-gadget.h