| Message ID | 20210223155005.21712-2-noltari@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | usb: host: ehci-platform: add ignore-oc DT support | expand |
On Tue, Feb 23, 2021 at 04:50:04PM +0100, Álvaro Fernández Rojas wrote: > Over-current reporting isn't supported on some platforms such as bcm63xx. > These devices will incorrectly report over-current if this flag isn't properly > activated. > > Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> > --- > Documentation/devicetree/bindings/usb/generic-ehci.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml > index cf83f2d9afac..294bbf02399e 100644 > --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml > +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml > @@ -117,6 +117,11 @@ properties: > Set this flag if EHCI has a Transaction Translator built into > the root hub. > > + ignore-oc: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + Set this flag for HCDs without over-current reporting support. This is not a good description of a device property. DT entries are supposed to described the hardware, not talk about how to use it. When you say that the bcm63xx doesn't support over-current reporting, what exactly do you mean? Do you mean that sometimes the hardware turns on the over-current bit when an over-current isn't actually present? Or do you mean something else? Alan Stern > + > needs-reset-on-resume: > $ref: /schemas/types.yaml#/definitions/flag > description: > -- > 2.20.1 >
Hi Alan, > El 23 feb 2021, a las 16:54, Alan Stern <stern@rowland.harvard.edu> escribió: > > On Tue, Feb 23, 2021 at 04:50:04PM +0100, Álvaro Fernández Rojas wrote: >> Over-current reporting isn't supported on some platforms such as bcm63xx. >> These devices will incorrectly report over-current if this flag isn't properly >> activated. >> >> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> >> --- >> Documentation/devicetree/bindings/usb/generic-ehci.yaml | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml >> index cf83f2d9afac..294bbf02399e 100644 >> --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml >> +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml >> @@ -117,6 +117,11 @@ properties: >> Set this flag if EHCI has a Transaction Translator built into >> the root hub. >> >> + ignore-oc: >> + $ref: /schemas/types.yaml#/definitions/flag >> + description: >> + Set this flag for HCDs without over-current reporting support. > > This is not a good description of a device property. DT entries are > supposed to described the hardware, not talk about how to use it. Any suggestions on a proper description? > > When you say that the bcm63xx doesn't support over-current reporting, > what exactly do you mean? Do you mean that sometimes the hardware turns > on the over-current bit when an over-current isn't actually present? Or > do you mean something else? Yes, the hardware turns on the over-current bit with no over-current present. > > Alan Stern > >> + >> needs-reset-on-resume: >> $ref: /schemas/types.yaml#/definitions/flag >> description: >> -- >> 2.20.1 Best regards, Álvaro.
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index cf83f2d9afac..294bbf02399e 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -117,6 +117,11 @@ properties: Set this flag if EHCI has a Transaction Translator built into the root hub. + ignore-oc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set this flag for HCDs without over-current reporting support. + needs-reset-on-resume: $ref: /schemas/types.yaml#/definitions/flag description:
Over-current reporting isn't supported on some platforms such as bcm63xx. These devices will incorrectly report over-current if this flag isn't properly activated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> --- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 5 +++++ 1 file changed, 5 insertions(+)