| Message ID | 20210406013643.3280369-3-badhri@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Fixes for tcpm-source-psy- and pSnkStby | expand |
On Mon, Apr 05, 2021 at 06:36:39PM -0700, Badhri Jagan Sridharan wrote: > tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt, > port->pps_data.max_volt, port->pps_data.max_curr even before > port partner accepts the requests. This leaves incorrect values > in current_limit and supply_voltage that get exported by > "tcpm-source-psy-". Solving this problem by caching the request > values in req_min_volt, req_max_volt, req_max_curr, req_out_volt, > req_op_curr. min_volt, max_volt, max_curr gets updated once the > partner accepts the request. current_limit, supply_voltage gets updated > once local port's tcpm enters SNK_TRANSITION_SINK when the accepted > current_limit and supply_voltage is enforced. > > Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> > --- > drivers/usb/typec/tcpm/tcpm.c | 84 ++++++++++++++++++++--------------- > 1 file changed, 49 insertions(+), 35 deletions(-) > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > index 03eca5061132..d43774cc2ccf 100644 > --- a/drivers/usb/typec/tcpm/tcpm.c > +++ b/drivers/usb/typec/tcpm/tcpm.c > @@ -269,11 +269,22 @@ struct pd_mode_data { > }; > > struct pd_pps_data { > + /* Actual min voltage at the local port */ > u32 min_volt; > + /* Requested min voltage to the port partner */ > + u32 req_min_volt; > + /* Actual max voltage at the local port */ > u32 max_volt; > + /* Requested max voltage to the port partner */ > + u32 req_max_volt; > + /* Actual max current at the local port */ > u32 max_curr; > - u32 out_volt; > - u32 op_curr; > + /* Requested max current of the port partner */ > + u32 req_max_curr; > + /* Requested output voltage to the port partner */ > + u32 req_out_volt; > + /* Requested operating current to the port partner */ > + u32 req_op_curr; Shouldn't you just document this all properly in a kerneldoc header right above the structure? thanks, greg k-h
On 06 April 2021 02:37, Badhri Jagan Sridharan wrote: > tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt, > port->pps_data.max_volt, port->pps_data.max_curr even before > port partner accepts the requests. This leaves incorrect values > in current_limit and supply_voltage that get exported by > "tcpm-source-psy-". Solving this problem by caching the request > values in req_min_volt, req_max_volt, req_max_curr, req_out_volt, > req_op_curr. min_volt, max_volt, max_curr gets updated once the > partner accepts the request. current_limit, supply_voltage gets updated > once local port's tcpm enters SNK_TRANSITION_SINK when the accepted > current_limit and supply_voltage is enforced. > > Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through > power_supply") > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> > --- Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> > drivers/usb/typec/tcpm/tcpm.c | 84 ++++++++++++++++++++--------------- > 1 file changed, 49 insertions(+), 35 deletions(-) > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > index 03eca5061132..d43774cc2ccf 100644 > --- a/drivers/usb/typec/tcpm/tcpm.c > +++ b/drivers/usb/typec/tcpm/tcpm.c > @@ -269,11 +269,22 @@ struct pd_mode_data { > }; > > struct pd_pps_data { > + /* Actual min voltage at the local port */ > u32 min_volt; > + /* Requested min voltage to the port partner */ > + u32 req_min_volt; > + /* Actual max voltage at the local port */ > u32 max_volt; > + /* Requested max voltage to the port partner */ > + u32 req_max_volt; > + /* Actual max current at the local port */ > u32 max_curr; > - u32 out_volt; > - u32 op_curr; > + /* Requested max current of the port partner */ > + u32 req_max_curr; > + /* Requested output voltage to the port partner */ > + u32 req_out_volt; > + /* Requested operating current to the port partner */ > + u32 req_op_curr; > bool supported; > bool active; > }; > @@ -2498,8 +2509,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port > *port, > break; > case SNK_NEGOTIATE_PPS_CAPABILITIES: > /* Revert data back from any requested PPS updates */ > - port->pps_data.out_volt = port->supply_voltage; > - port->pps_data.op_curr = port->current_limit; > + port->pps_data.req_out_volt = port->supply_voltage; > + port->pps_data.req_op_curr = port->current_limit; > port->pps_status = (type == PD_CTRL_WAIT ? > -EAGAIN : -EOPNOTSUPP); > > @@ -2548,8 +2559,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port > *port, > break; > case SNK_NEGOTIATE_PPS_CAPABILITIES: > port->pps_data.active = true; > - port->req_supply_voltage = port->pps_data.out_volt; > - port->req_current_limit = port->pps_data.op_curr; > + port->pps_data.min_volt = port- > >pps_data.req_min_volt; > + port->pps_data.max_volt = port- > >pps_data.req_max_volt; > + port->pps_data.max_curr = port- > >pps_data.req_max_curr; > + port->req_supply_voltage = port- > >pps_data.req_out_volt; > + port->req_current_limit = port->pps_data.req_op_curr; > tcpm_set_state(port, SNK_TRANSITION_SINK, 0); > break; > case SOFT_RESET_SEND: > @@ -3108,16 +3122,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct > tcpm_port *port) > src = port->source_caps[src_pdo]; > snk = port->snk_pdo[snk_pdo]; > > - port->pps_data.min_volt = > max(pdo_pps_apdo_min_voltage(src), > - pdo_pps_apdo_min_voltage(snk)); > - port->pps_data.max_volt = > min(pdo_pps_apdo_max_voltage(src), > - pdo_pps_apdo_max_voltage(snk)); > - port->pps_data.max_curr = min_pps_apdo_current(src, snk); > - port->pps_data.out_volt = min(port->pps_data.max_volt, > - max(port->pps_data.min_volt, > - port->pps_data.out_volt)); > - port->pps_data.op_curr = min(port->pps_data.max_curr, > - port->pps_data.op_curr); > + port->pps_data.req_min_volt = > max(pdo_pps_apdo_min_voltage(src), > + > pdo_pps_apdo_min_voltage(snk)); > + port->pps_data.req_max_volt = > min(pdo_pps_apdo_max_voltage(src), > + > pdo_pps_apdo_max_voltage(snk)); > + port->pps_data.req_max_curr = min_pps_apdo_current(src, > snk); > + port->pps_data.req_out_volt = min(port->pps_data.max_volt, > + max(port->pps_data.min_volt, > + port- > >pps_data.req_out_volt)); > + port->pps_data.req_op_curr = min(port->pps_data.max_curr, > + port->pps_data.req_op_curr); > power_supply_changed(port->psy); > } > > @@ -3245,10 +3259,10 @@ static int tcpm_pd_build_pps_request(struct > tcpm_port *port, u32 *rdo) > tcpm_log(port, "Invalid APDO selected!"); > return -EINVAL; > } > - max_mv = port->pps_data.max_volt; > - max_ma = port->pps_data.max_curr; > - out_mv = port->pps_data.out_volt; > - op_ma = port->pps_data.op_curr; > + max_mv = port->pps_data.req_max_volt; > + max_ma = port->pps_data.req_max_curr; > + out_mv = port->pps_data.req_out_volt; > + op_ma = port->pps_data.req_op_curr; > break; > default: > tcpm_log(port, "Invalid PDO selected!"); > @@ -3295,8 +3309,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port > *port, u32 *rdo) > tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", > src_pdo_index, out_mv, op_ma); > > - port->pps_data.op_curr = op_ma; > - port->pps_data.out_volt = out_mv; > + port->pps_data.req_op_curr = op_ma; > + port->pps_data.req_out_volt = out_mv; > > return 0; > } > @@ -5429,7 +5443,7 @@ static int tcpm_try_role(struct typec_port *p, int role) > return ret; > } > > -static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) > +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr) > { > unsigned int target_mw; > int ret; > @@ -5447,12 +5461,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > *port, u16 op_curr) > goto port_unlock; > } > > - if (op_curr > port->pps_data.max_curr) { > + if (req_op_curr > port->pps_data.max_curr) { > ret = -EINVAL; > goto port_unlock; > } > > - target_mw = (op_curr * port->pps_data.out_volt) / 1000; > + target_mw = (req_op_curr * port->supply_voltage) / 1000; > if (target_mw < port->operating_snk_mw) { > ret = -EINVAL; > goto port_unlock; > @@ -5466,10 +5480,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > *port, u16 op_curr) > } > > /* Round down operating current to align with PPS valid steps */ > - op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP); > + req_op_curr = req_op_curr - (req_op_curr % > RDO_PROG_CURR_MA_STEP); > > reinit_completion(&port->pps_complete); > - port->pps_data.op_curr = op_curr; > + port->pps_data.req_op_curr = req_op_curr; > port->pps_status = 0; > port->pps_pending = true; > mutex_unlock(&port->lock); > @@ -5490,7 +5504,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > *port, u16 op_curr) > return ret; > } > > -static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) > +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt) > { > unsigned int target_mw; > int ret; > @@ -5508,13 +5522,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port > *port, u16 out_volt) > goto port_unlock; > } > > - if (out_volt < port->pps_data.min_volt || > - out_volt > port->pps_data.max_volt) { > + if (req_out_volt < port->pps_data.min_volt || > + req_out_volt > port->pps_data.max_volt) { > ret = -EINVAL; > goto port_unlock; > } > > - target_mw = (port->pps_data.op_curr * out_volt) / 1000; > + target_mw = (port->current_limit * req_out_volt) / 1000; > if (target_mw < port->operating_snk_mw) { > ret = -EINVAL; > goto port_unlock; > @@ -5528,10 +5542,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port > *port, u16 out_volt) > } > > /* Round down output voltage to align with PPS valid steps */ > - out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP); > + req_out_volt = req_out_volt - (req_out_volt % > RDO_PROG_VOLT_MV_STEP); > > reinit_completion(&port->pps_complete); > - port->pps_data.out_volt = out_volt; > + port->pps_data.req_out_volt = req_out_volt; > port->pps_status = 0; > port->pps_pending = true; > mutex_unlock(&port->lock); > @@ -5589,8 +5603,8 @@ static int tcpm_pps_activate(struct tcpm_port *port, > bool activate) > > /* Trigger PPS request or move back to standard PDO contract */ > if (activate) { > - port->pps_data.out_volt = port->supply_voltage; > - port->pps_data.op_curr = port->current_limit; > + port->pps_data.req_out_volt = port->supply_voltage; > + port->pps_data.req_op_curr = port->current_limit; > } > mutex_unlock(&port->lock); > > -- > 2.31.0.208.g409f899ff0-goog
Hi Greg, Moved to kerneldoc header in V2. Thanks, Badhri On Wed, Apr 7, 2021 at 9:07 AM Adam Thomson <Adam.Thomson.Opensource@diasemi.com> wrote: > > On 06 April 2021 02:37, Badhri Jagan Sridharan wrote: > > > tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt, > > port->pps_data.max_volt, port->pps_data.max_curr even before > > port partner accepts the requests. This leaves incorrect values > > in current_limit and supply_voltage that get exported by > > "tcpm-source-psy-". Solving this problem by caching the request > > values in req_min_volt, req_max_volt, req_max_curr, req_out_volt, > > req_op_curr. min_volt, max_volt, max_curr gets updated once the > > partner accepts the request. current_limit, supply_voltage gets updated > > once local port's tcpm enters SNK_TRANSITION_SINK when the accepted > > current_limit and supply_voltage is enforced. > > > > Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through > > power_supply") > > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> > > --- > > Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> > > > drivers/usb/typec/tcpm/tcpm.c | 84 ++++++++++++++++++++--------------- > > 1 file changed, 49 insertions(+), 35 deletions(-) > > > > diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c > > index 03eca5061132..d43774cc2ccf 100644 > > --- a/drivers/usb/typec/tcpm/tcpm.c > > +++ b/drivers/usb/typec/tcpm/tcpm.c > > @@ -269,11 +269,22 @@ struct pd_mode_data { > > }; > > > > struct pd_pps_data { > > + /* Actual min voltage at the local port */ > > u32 min_volt; > > + /* Requested min voltage to the port partner */ > > + u32 req_min_volt; > > + /* Actual max voltage at the local port */ > > u32 max_volt; > > + /* Requested max voltage to the port partner */ > > + u32 req_max_volt; > > + /* Actual max current at the local port */ > > u32 max_curr; > > - u32 out_volt; > > - u32 op_curr; > > + /* Requested max current of the port partner */ > > + u32 req_max_curr; > > + /* Requested output voltage to the port partner */ > > + u32 req_out_volt; > > + /* Requested operating current to the port partner */ > > + u32 req_op_curr; > > bool supported; > > bool active; > > }; > > @@ -2498,8 +2509,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port > > *port, > > break; > > case SNK_NEGOTIATE_PPS_CAPABILITIES: > > /* Revert data back from any requested PPS updates */ > > - port->pps_data.out_volt = port->supply_voltage; > > - port->pps_data.op_curr = port->current_limit; > > + port->pps_data.req_out_volt = port->supply_voltage; > > + port->pps_data.req_op_curr = port->current_limit; > > port->pps_status = (type == PD_CTRL_WAIT ? > > -EAGAIN : -EOPNOTSUPP); > > > > @@ -2548,8 +2559,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port > > *port, > > break; > > case SNK_NEGOTIATE_PPS_CAPABILITIES: > > port->pps_data.active = true; > > - port->req_supply_voltage = port->pps_data.out_volt; > > - port->req_current_limit = port->pps_data.op_curr; > > + port->pps_data.min_volt = port- > > >pps_data.req_min_volt; > > + port->pps_data.max_volt = port- > > >pps_data.req_max_volt; > > + port->pps_data.max_curr = port- > > >pps_data.req_max_curr; > > + port->req_supply_voltage = port- > > >pps_data.req_out_volt; > > + port->req_current_limit = port->pps_data.req_op_curr; > > tcpm_set_state(port, SNK_TRANSITION_SINK, 0); > > break; > > case SOFT_RESET_SEND: > > @@ -3108,16 +3122,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct > > tcpm_port *port) > > src = port->source_caps[src_pdo]; > > snk = port->snk_pdo[snk_pdo]; > > > > - port->pps_data.min_volt = > > max(pdo_pps_apdo_min_voltage(src), > > - pdo_pps_apdo_min_voltage(snk)); > > - port->pps_data.max_volt = > > min(pdo_pps_apdo_max_voltage(src), > > - pdo_pps_apdo_max_voltage(snk)); > > - port->pps_data.max_curr = min_pps_apdo_current(src, snk); > > - port->pps_data.out_volt = min(port->pps_data.max_volt, > > - max(port->pps_data.min_volt, > > - port->pps_data.out_volt)); > > - port->pps_data.op_curr = min(port->pps_data.max_curr, > > - port->pps_data.op_curr); > > + port->pps_data.req_min_volt = > > max(pdo_pps_apdo_min_voltage(src), > > + > > pdo_pps_apdo_min_voltage(snk)); > > + port->pps_data.req_max_volt = > > min(pdo_pps_apdo_max_voltage(src), > > + > > pdo_pps_apdo_max_voltage(snk)); > > + port->pps_data.req_max_curr = min_pps_apdo_current(src, > > snk); > > + port->pps_data.req_out_volt = min(port->pps_data.max_volt, > > + max(port->pps_data.min_volt, > > + port- > > >pps_data.req_out_volt)); > > + port->pps_data.req_op_curr = min(port->pps_data.max_curr, > > + port->pps_data.req_op_curr); > > power_supply_changed(port->psy); > > } > > > > @@ -3245,10 +3259,10 @@ static int tcpm_pd_build_pps_request(struct > > tcpm_port *port, u32 *rdo) > > tcpm_log(port, "Invalid APDO selected!"); > > return -EINVAL; > > } > > - max_mv = port->pps_data.max_volt; > > - max_ma = port->pps_data.max_curr; > > - out_mv = port->pps_data.out_volt; > > - op_ma = port->pps_data.op_curr; > > + max_mv = port->pps_data.req_max_volt; > > + max_ma = port->pps_data.req_max_curr; > > + out_mv = port->pps_data.req_out_volt; > > + op_ma = port->pps_data.req_op_curr; > > break; > > default: > > tcpm_log(port, "Invalid PDO selected!"); > > @@ -3295,8 +3309,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port > > *port, u32 *rdo) > > tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", > > src_pdo_index, out_mv, op_ma); > > > > - port->pps_data.op_curr = op_ma; > > - port->pps_data.out_volt = out_mv; > > + port->pps_data.req_op_curr = op_ma; > > + port->pps_data.req_out_volt = out_mv; > > > > return 0; > > } > > @@ -5429,7 +5443,7 @@ static int tcpm_try_role(struct typec_port *p, int role) > > return ret; > > } > > > > -static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) > > +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr) > > { > > unsigned int target_mw; > > int ret; > > @@ -5447,12 +5461,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > > *port, u16 op_curr) > > goto port_unlock; > > } > > > > - if (op_curr > port->pps_data.max_curr) { > > + if (req_op_curr > port->pps_data.max_curr) { > > ret = -EINVAL; > > goto port_unlock; > > } > > > > - target_mw = (op_curr * port->pps_data.out_volt) / 1000; > > + target_mw = (req_op_curr * port->supply_voltage) / 1000; > > if (target_mw < port->operating_snk_mw) { > > ret = -EINVAL; > > goto port_unlock; > > @@ -5466,10 +5480,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > > *port, u16 op_curr) > > } > > > > /* Round down operating current to align with PPS valid steps */ > > - op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP); > > + req_op_curr = req_op_curr - (req_op_curr % > > RDO_PROG_CURR_MA_STEP); > > > > reinit_completion(&port->pps_complete); > > - port->pps_data.op_curr = op_curr; > > + port->pps_data.req_op_curr = req_op_curr; > > port->pps_status = 0; > > port->pps_pending = true; > > mutex_unlock(&port->lock); > > @@ -5490,7 +5504,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port > > *port, u16 op_curr) > > return ret; > > } > > > > -static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) > > +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt) > > { > > unsigned int target_mw; > > int ret; > > @@ -5508,13 +5522,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port > > *port, u16 out_volt) > > goto port_unlock; > > } > > > > - if (out_volt < port->pps_data.min_volt || > > - out_volt > port->pps_data.max_volt) { > > + if (req_out_volt < port->pps_data.min_volt || > > + req_out_volt > port->pps_data.max_volt) { > > ret = -EINVAL; > > goto port_unlock; > > } > > > > - target_mw = (port->pps_data.op_curr * out_volt) / 1000; > > + target_mw = (port->current_limit * req_out_volt) / 1000; > > if (target_mw < port->operating_snk_mw) { > > ret = -EINVAL; > > goto port_unlock; > > @@ -5528,10 +5542,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port > > *port, u16 out_volt) > > } > > > > /* Round down output voltage to align with PPS valid steps */ > > - out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP); > > + req_out_volt = req_out_volt - (req_out_volt % > > RDO_PROG_VOLT_MV_STEP); > > > > reinit_completion(&port->pps_complete); > > - port->pps_data.out_volt = out_volt; > > + port->pps_data.req_out_volt = req_out_volt; > > port->pps_status = 0; > > port->pps_pending = true; > > mutex_unlock(&port->lock); > > @@ -5589,8 +5603,8 @@ static int tcpm_pps_activate(struct tcpm_port *port, > > bool activate) > > > > /* Trigger PPS request or move back to standard PDO contract */ > > if (activate) { > > - port->pps_data.out_volt = port->supply_voltage; > > - port->pps_data.op_curr = port->current_limit; > > + port->pps_data.req_out_volt = port->supply_voltage; > > + port->pps_data.req_op_curr = port->current_limit; > > } > > mutex_unlock(&port->lock); > > > > -- > > 2.31.0.208.g409f899ff0-goog >
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 03eca5061132..d43774cc2ccf 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -269,11 +269,22 @@ struct pd_mode_data { }; struct pd_pps_data { + /* Actual min voltage at the local port */ u32 min_volt; + /* Requested min voltage to the port partner */ + u32 req_min_volt; + /* Actual max voltage at the local port */ u32 max_volt; + /* Requested max voltage to the port partner */ + u32 req_max_volt; + /* Actual max current at the local port */ u32 max_curr; - u32 out_volt; - u32 op_curr; + /* Requested max current of the port partner */ + u32 req_max_curr; + /* Requested output voltage to the port partner */ + u32 req_out_volt; + /* Requested operating current to the port partner */ + u32 req_op_curr; bool supported; bool active; }; @@ -2498,8 +2509,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SNK_NEGOTIATE_PPS_CAPABILITIES: /* Revert data back from any requested PPS updates */ - port->pps_data.out_volt = port->supply_voltage; - port->pps_data.op_curr = port->current_limit; + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; port->pps_status = (type == PD_CTRL_WAIT ? -EAGAIN : -EOPNOTSUPP); @@ -2548,8 +2559,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SNK_NEGOTIATE_PPS_CAPABILITIES: port->pps_data.active = true; - port->req_supply_voltage = port->pps_data.out_volt; - port->req_current_limit = port->pps_data.op_curr; + port->pps_data.min_volt = port->pps_data.req_min_volt; + port->pps_data.max_volt = port->pps_data.req_max_volt; + port->pps_data.max_curr = port->pps_data.req_max_curr; + port->req_supply_voltage = port->pps_data.req_out_volt; + port->req_current_limit = port->pps_data.req_op_curr; tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -3108,16 +3122,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) src = port->source_caps[src_pdo]; snk = port->snk_pdo[snk_pdo]; - port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src), - pdo_pps_apdo_min_voltage(snk)); - port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src), - pdo_pps_apdo_max_voltage(snk)); - port->pps_data.max_curr = min_pps_apdo_current(src, snk); - port->pps_data.out_volt = min(port->pps_data.max_volt, - max(port->pps_data.min_volt, - port->pps_data.out_volt)); - port->pps_data.op_curr = min(port->pps_data.max_curr, - port->pps_data.op_curr); + port->pps_data.req_min_volt = max(pdo_pps_apdo_min_voltage(src), + pdo_pps_apdo_min_voltage(snk)); + port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src), + pdo_pps_apdo_max_voltage(snk)); + port->pps_data.req_max_curr = min_pps_apdo_current(src, snk); + port->pps_data.req_out_volt = min(port->pps_data.max_volt, + max(port->pps_data.min_volt, + port->pps_data.req_out_volt)); + port->pps_data.req_op_curr = min(port->pps_data.max_curr, + port->pps_data.req_op_curr); power_supply_changed(port->psy); } @@ -3245,10 +3259,10 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) tcpm_log(port, "Invalid APDO selected!"); return -EINVAL; } - max_mv = port->pps_data.max_volt; - max_ma = port->pps_data.max_curr; - out_mv = port->pps_data.out_volt; - op_ma = port->pps_data.op_curr; + max_mv = port->pps_data.req_max_volt; + max_ma = port->pps_data.req_max_curr; + out_mv = port->pps_data.req_out_volt; + op_ma = port->pps_data.req_op_curr; break; default: tcpm_log(port, "Invalid PDO selected!"); @@ -3295,8 +3309,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", src_pdo_index, out_mv, op_ma); - port->pps_data.op_curr = op_ma; - port->pps_data.out_volt = out_mv; + port->pps_data.req_op_curr = op_ma; + port->pps_data.req_out_volt = out_mv; return 0; } @@ -5429,7 +5443,7 @@ static int tcpm_try_role(struct typec_port *p, int role) return ret; } -static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr) { unsigned int target_mw; int ret; @@ -5447,12 +5461,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) goto port_unlock; } - if (op_curr > port->pps_data.max_curr) { + if (req_op_curr > port->pps_data.max_curr) { ret = -EINVAL; goto port_unlock; } - target_mw = (op_curr * port->pps_data.out_volt) / 1000; + target_mw = (req_op_curr * port->supply_voltage) / 1000; if (target_mw < port->operating_snk_mw) { ret = -EINVAL; goto port_unlock; @@ -5466,10 +5480,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) } /* Round down operating current to align with PPS valid steps */ - op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP); + req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP); reinit_completion(&port->pps_complete); - port->pps_data.op_curr = op_curr; + port->pps_data.req_op_curr = req_op_curr; port->pps_status = 0; port->pps_pending = true; mutex_unlock(&port->lock); @@ -5490,7 +5504,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) return ret; } -static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt) { unsigned int target_mw; int ret; @@ -5508,13 +5522,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) goto port_unlock; } - if (out_volt < port->pps_data.min_volt || - out_volt > port->pps_data.max_volt) { + if (req_out_volt < port->pps_data.min_volt || + req_out_volt > port->pps_data.max_volt) { ret = -EINVAL; goto port_unlock; } - target_mw = (port->pps_data.op_curr * out_volt) / 1000; + target_mw = (port->current_limit * req_out_volt) / 1000; if (target_mw < port->operating_snk_mw) { ret = -EINVAL; goto port_unlock; @@ -5528,10 +5542,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) } /* Round down output voltage to align with PPS valid steps */ - out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP); + req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP); reinit_completion(&port->pps_complete); - port->pps_data.out_volt = out_volt; + port->pps_data.req_out_volt = req_out_volt; port->pps_status = 0; port->pps_pending = true; mutex_unlock(&port->lock); @@ -5589,8 +5603,8 @@ static int tcpm_pps_activate(struct tcpm_port *port, bool activate) /* Trigger PPS request or move back to standard PDO contract */ if (activate) { - port->pps_data.out_volt = port->supply_voltage; - port->pps_data.op_curr = port->current_limit; + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; } mutex_unlock(&port->lock);
tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt, port->pps_data.max_volt, port->pps_data.max_curr even before port partner accepts the requests. This leaves incorrect values in current_limit and supply_voltage that get exported by "tcpm-source-psy-". Solving this problem by caching the request values in req_min_volt, req_max_volt, req_max_curr, req_out_volt, req_op_curr. min_volt, max_volt, max_curr gets updated once the partner accepts the request. current_limit, supply_voltage gets updated once local port's tcpm enters SNK_TRANSITION_SINK when the accepted current_limit and supply_voltage is enforced. Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> --- drivers/usb/typec/tcpm/tcpm.c | 84 ++++++++++++++++++++--------------- 1 file changed, 49 insertions(+), 35 deletions(-)