diff mbox series

[01/24] USB: serial: ark3116: fix TIOCGSERIAL implementation

Message ID 20210407103925.829-2-johan@kernel.org (mailing list archive)
State Accepted
Commit 9d76b10ac643f1115121d2054f0d47f2e295f743
Headers show
Series USB: serial: TIOCSSERIAL fixes and generic support | expand

Commit Message

Johan Hovold April 7, 2021, 10:39 a.m. UTC 
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The baud_base parameter could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).

Fixes: 2f430b4bbae7 ("USB: ark3116: Add TIOCGSERIAL and TIOCSSERIAL ioctl calls.")
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ark3116.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index b9bedfe9bd09..957cdd694b1f 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -392,8 +392,9 @@  static int ark3116_get_serial_info(struct tty_struct *tty,
 
 	ss->type = PORT_16654;
 	ss->line = port->minor;
-	ss->port = port->port_number;
-	ss->baud_base = 460800;
+	ss->close_delay = 50;
+	ss->closing_wait = 3000;
+
 	return 0;
 }