| Message ID | 20210409113029.7144-8-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand |
On Fri 09 Apr 06:30 CDT 2021, Serge Semin wrote: > In accordance with the DWC USB3 bindings the corresponding node > name is suppose to comply with the Generic USB HCD DT schema, which > requires the USB nodes to have the name acceptable by the regexp: > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly > named. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> > Acked-by: Krzysztof Kozlowski <krzk@kernel.org> > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> As mentioned previously, I would like to merge this through the qcom soc tree to avoid conflicts with other activities, but need the driver code (patch 6) to land first. Regards, Bjorn > --- > arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +- > arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- > 9 files changed, 14 insertions(+), 14 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > index defcbd15edf9..34e97da98270 100644 > --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi > @@ -1064,7 +1064,7 @@ &usb2 { > status = "okay"; > extcon = <&usb2_id>; > > - dwc3@7600000 { > + usb@7600000 { > extcon = <&usb2_id>; > dr_mode = "otg"; > maximum-speed = "high-speed"; > @@ -1075,7 +1075,7 @@ &usb3 { > status = "okay"; > extcon = <&usb3_id>; > > - dwc3@6a00000 { > + usb@6a00000 { > extcon = <&usb3_id>; > dr_mode = "otg"; > }; > diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi > index a32e5e79ab0b..7df4eb710aae 100644 > --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi > @@ -427,7 +427,7 @@ usb_0: usb@8af8800 { > resets = <&gcc GCC_USB0_BCR>; > status = "disabled"; > > - dwc_0: dwc3@8a00000 { > + dwc_0: usb@8a00000 { > compatible = "snps,dwc3"; > reg = <0x8a00000 0xcd00>; > interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > @@ -468,7 +468,7 @@ usb_1: usb@8cf8800 { > resets = <&gcc GCC_USB1_BCR>; > status = "disabled"; > > - dwc_1: dwc3@8c00000 { > + dwc_1: usb@8c00000 { > compatible = "snps,dwc3"; > reg = <0x8c00000 0xcd00>; > interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index ce430ba9c118..9eb31b3e6ee7 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -1772,7 +1772,7 @@ usb3: usb@6af8800 { > power-domains = <&gcc USB30_GDSC>; > status = "disabled"; > > - dwc3@6a00000 { > + usb@6a00000 { > compatible = "snps,dwc3"; > reg = <0x06a00000 0xcc00>; > interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; > @@ -1983,7 +1983,7 @@ usb2: usb@76f8800 { > power-domains = <&gcc USB30_GDSC>; > status = "disabled"; > > - dwc3@7600000 { > + usb@7600000 { > compatible = "snps,dwc3"; > reg = <0x07600000 0xcc00>; > interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi > index 1f2e93aa6553..9141c5d09b59 100644 > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi > @@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 { > > resets = <&gcc GCC_USB_30_BCR>; > > - usb3_dwc3: dwc3@a800000 { > + usb3_dwc3: usb@a800000 { > compatible = "snps,dwc3"; > reg = <0x0a800000 0xcd00>; > interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > index a80c578484ba..f8a55307b855 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi > @@ -337,7 +337,7 @@ &usb2_phy_sec { > &usb3 { > status = "okay"; > > - dwc3@7580000 { > + usb@7580000 { > dr_mode = "host"; > }; > }; > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index 339790ba585d..9c4be020d568 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -544,7 +544,7 @@ usb3: usb@7678800 { > assigned-clock-rates = <19200000>, <200000000>; > status = "disabled"; > > - dwc3@7580000 { > + usb@7580000 { > compatible = "snps,dwc3"; > reg = <0x07580000 0xcd00>; > interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > @@ -573,7 +573,7 @@ usb2: usb@79b8800 { > assigned-clock-rates = <19200000>, <133333333>; > status = "disabled"; > > - dwc3@78c0000 { > + usb@78c0000 { > compatible = "snps,dwc3"; > reg = <0x078c0000 0xcc00>; > interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 1ea3344ab62c..8b83ffbb5b2a 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 { > <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; > interconnect-names = "usb-ddr", "apps-usb"; > > - usb_1_dwc3: dwc3@a600000 { > + usb_1_dwc3: usb@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xe000>; > interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 454f794af547..809be2c67d7a 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 { > <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; > interconnect-names = "usb-ddr", "apps-usb"; > > - usb_1_dwc3: dwc3@a600000 { > + usb_1_dwc3: usb@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xcd00>; > interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > @@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 { > <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; > interconnect-names = "usb-ddr", "apps-usb"; > > - usb_2_dwc3: dwc3@a800000 { > + usb_2_dwc3: usb@a800000 { > compatible = "snps,dwc3"; > reg = <0 0x0a800000 0 0xcd00>; > interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index e5bb17bc2f46..e4c3edc13676 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 { > > resets = <&gcc GCC_USB30_PRIM_BCR>; > > - usb_1_dwc3: dwc3@a600000 { > + usb_1_dwc3: usb@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xcd00>; > interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; > -- > 2.30.1 >
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index defcbd15edf9..34e97da98270 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -1064,7 +1064,7 @@ &usb2 { status = "okay"; extcon = <&usb2_id>; - dwc3@7600000 { + usb@7600000 { extcon = <&usb2_id>; dr_mode = "otg"; maximum-speed = "high-speed"; @@ -1075,7 +1075,7 @@ &usb3 { status = "okay"; extcon = <&usb3_id>; - dwc3@6a00000 { + usb@6a00000 { extcon = <&usb3_id>; dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index a32e5e79ab0b..7df4eb710aae 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -427,7 +427,7 @@ usb_0: usb@8af8800 { resets = <&gcc GCC_USB0_BCR>; status = "disabled"; - dwc_0: dwc3@8a00000 { + dwc_0: usb@8a00000 { compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; @@ -468,7 +468,7 @@ usb_1: usb@8cf8800 { resets = <&gcc GCC_USB1_BCR>; status = "disabled"; - dwc_1: dwc3@8c00000 { + dwc_1: usb@8c00000 { compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ce430ba9c118..9eb31b3e6ee7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1772,7 +1772,7 @@ usb3: usb@6af8800 { power-domains = <&gcc USB30_GDSC>; status = "disabled"; - dwc3@6a00000 { + usb@6a00000 { compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; @@ -1983,7 +1983,7 @@ usb2: usb@76f8800 { power-domains = <&gcc USB30_GDSC>; status = "disabled"; - dwc3@7600000 { + usb@7600000 { compatible = "snps,dwc3"; reg = <0x07600000 0xcc00>; interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 1f2e93aa6553..9141c5d09b59 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 { resets = <&gcc GCC_USB_30_BCR>; - usb3_dwc3: dwc3@a800000 { + usb3_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0x0a800000 0xcd00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index a80c578484ba..f8a55307b855 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -337,7 +337,7 @@ &usb2_phy_sec { &usb3 { status = "okay"; - dwc3@7580000 { + usb@7580000 { dr_mode = "host"; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 339790ba585d..9c4be020d568 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -544,7 +544,7 @@ usb3: usb@7678800 { assigned-clock-rates = <19200000>, <200000000>; status = "disabled"; - dwc3@7580000 { + usb@7580000 { compatible = "snps,dwc3"; reg = <0x07580000 0xcd00>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -573,7 +573,7 @@ usb2: usb@79b8800 { assigned-clock-rates = <19200000>, <133333333>; status = "disabled"; - dwc3@78c0000 { + usb@78c0000 { compatible = "snps,dwc3"; reg = <0x078c0000 0xcc00>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 1ea3344ab62c..8b83ffbb5b2a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 { <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 454f794af547..809be2c67d7a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 { <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; @@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 { <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; interconnect-names = "usb-ddr", "apps-usb"; - usb_2_dwc3: dwc3@a800000 { + usb_2_dwc3: usb@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index e5bb17bc2f46..e4c3edc13676 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 { resets = <&gcc GCC_USB30_PRIM_BCR>; - usb_1_dwc3: dwc3@a600000 { + usb_1_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;