diff mbox series

[12/12] USB: cdc-acm: add more Maxlinear/Exar models to ignore list

Message ID 20210412095557.1213-13-johan@kernel.org (mailing list archive)
State Accepted
Commit 039b81d50a4822edfc07a7c2e6963823e993b2f0
Headers show
Series USB: serial: xr: add support for more device types | expand

Commit Message

Johan Hovold April 12, 2021, 9:55 a.m. UTC 
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Now that the xr_serial got support for other models, add their USB IDs
as well.

The Maxlinear/Exar USB UARTs can be used in either ACM mode using the
cdc-acm driver or in "custom driver" mode in which further features such
as hardware and software flow control, GPIO control and in-band
line-status reporting are available.

In ACM mode the device always enables RTS/CTS flow control, something
which could prevent transmission in case the CTS input isn't wired up
correctly.

Ensure that cdc_acm will not bind to these devices if the custom
USB-serial driver is enabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+huawei@kernel.org
[ johan: rewrite commit message, clean up entries ]
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/class/cdc-acm.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Comments

Greg Kroah-Hartman April 12, 2021, 11 a.m. UTC | #1 
On Mon, Apr 12, 2021 at 11:55:57AM +0200, Johan Hovold wrote:
> From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> 
> Now that the xr_serial got support for other models, add their USB IDs
> as well.
> 
> The Maxlinear/Exar USB UARTs can be used in either ACM mode using the
> cdc-acm driver or in "custom driver" mode in which further features such
> as hardware and software flow control, GPIO control and in-band
> line-status reporting are available.
> 
> In ACM mode the device always enables RTS/CTS flow control, something
> which could prevent transmission in case the CTS input isn't wired up
> correctly.
> 
> Ensure that cdc_acm will not bind to these devices if the custom
> USB-serial driver is enabled.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+huawei@kernel.org
> [ johan: rewrite commit message, clean up entries ]
> Cc: Oliver Neukum <oneukum@suse.com>
> Signed-off-by: Johan Hovold <johan@kernel.org>

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff mbox series

Patch

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 337ffced9c40..434539b13a70 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1903,9 +1903,17 @@  static const struct usb_device_id acm_ids[] = {
 #endif
 
 #if IS_ENABLED(CONFIG_USB_SERIAL_XR)
-	{ USB_DEVICE(0x04e2, 0x1410),   /* Ignore XR21V141X USB to Serial converter */
-	.driver_info = IGNORE_DEVICE,
-	},
+	{ USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE },
 #endif
 
 	/*Samsung phone in firmware update mode */