| Message ID | 20210416124755.E47F3A005D@mailhost.synopsys.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On 4/16/2021 4:47 PM, Artur Petrosyan wrote: > This move is done to call hibernation exit handler in > "dwc2_port_resume()" function when core receives port resume. > Otherwise it could be confusing to exit hibernation in > "dwc2_hcd_hub_control()" function but other power saving modes > in "dwc2_port_resume()" function. > > Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> > --- > Changes in v2: > - None > > drivers/usb/dwc2/hcd.c | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c > index 43a2298b7d42..cc9ad6cf02d9 100644 > --- a/drivers/usb/dwc2/hcd.c > +++ b/drivers/usb/dwc2/hcd.c > @@ -3383,6 +3383,11 @@ int dwc2_port_resume(struct dwc2_hsotg *hsotg) > "exit partial_power_down failed.\n"); > break; > case DWC2_POWER_DOWN_PARAM_HIBERNATION: > + /* Exit host hibernation. */ > + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); > + if (ret) > + dev_err(hsotg->dev, "exit hibernation failed.\n"); > + break; > case DWC2_POWER_DOWN_PARAM_NONE: > /* > * If not hibernation nor partial power down are supported, > @@ -3446,12 +3451,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, > dev_dbg(hsotg->dev, > "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); > > - if (hsotg->bus_suspended) { > - if (hsotg->hibernated) > - dwc2_exit_hibernation(hsotg, 0, 0, 1); > - else > - dwc2_port_resume(hsotg); > - } > + if (hsotg->bus_suspended) > + retval = dwc2_port_resume(hsotg); > break; > > case USB_PORT_FEAT_POWER: >
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 43a2298b7d42..cc9ad6cf02d9 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3383,6 +3383,11 @@ int dwc2_port_resume(struct dwc2_hsotg *hsotg) "exit partial_power_down failed.\n"); break; case DWC2_POWER_DOWN_PARAM_HIBERNATION: + /* Exit host hibernation. */ + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); + if (ret) + dev_err(hsotg->dev, "exit hibernation failed.\n"); + break; case DWC2_POWER_DOWN_PARAM_NONE: /* * If not hibernation nor partial power down are supported, @@ -3446,12 +3451,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, dev_dbg(hsotg->dev, "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); - if (hsotg->bus_suspended) { - if (hsotg->hibernated) - dwc2_exit_hibernation(hsotg, 0, 0, 1); - else - dwc2_port_resume(hsotg); - } + if (hsotg->bus_suspended) + retval = dwc2_port_resume(hsotg); break; case USB_PORT_FEAT_POWER:
This move is done to call hibernation exit handler in "dwc2_port_resume()" function when core receives port resume. Otherwise it could be confusing to exit hibernation in "dwc2_hcd_hub_control()" function but other power saving modes in "dwc2_port_resume()" function. Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com> --- Changes in v2: - None drivers/usb/dwc2/hcd.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)