@@ -83,7 +83,8 @@ static int isp1760_init_core(struct isp1760_device *isp)
*
* TODO: Really support OTG. For now we configure port 1 in device mode
*/
- if ((isp->devflags & ISP1760_FLAG_ISP1761) &&
+ if (((isp->devflags & ISP1760_FLAG_ISP1761) ||
+ (isp->devflags & ISP1760_FLAG_ISP1763)) &&
(isp->devflags & ISP1760_FLAG_PERIPHERAL_EN)) {
isp1760_field_set(hcd->fields, HW_DM_PULLDOWN);
isp1760_field_set(hcd->fields, HW_DP_PULLDOWN);
@@ -470,13 +471,15 @@ static const struct regmap_config isp1763_dc_regmap_conf = {
int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
struct device *dev, unsigned int devflags)
{
- bool udc_disabled = !(devflags & ISP1760_FLAG_ISP1761);
const struct regmap_config *hc_regmap;
const struct reg_field *hc_reg_fields;
+ const struct regmap_config *dc_regmap;
+ const struct reg_field *dc_reg_fields;
struct isp1760_device *isp;
struct isp1760_hcd *hcd;
struct isp1760_udc *udc;
struct regmap_field *f;
+ bool udc_enabled;
int ret;
int i;
@@ -484,8 +487,11 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
* If neither the HCD not the UDC is enabled return an error, as no
* device would be registered.
*/
+ udc_enabled = ((devflags & ISP1760_FLAG_ISP1763) ||
+ (devflags & ISP1760_FLAG_ISP1761));
+
if ((!IS_ENABLED(CONFIG_USB_ISP1760_HCD) || usb_disabled()) &&
- (!IS_ENABLED(CONFIG_USB_ISP1761_UDC) || udc_disabled))
+ (!IS_ENABLED(CONFIG_USB_ISP1761_UDC) || !udc_enabled))
return -ENODEV;
isp = devm_kzalloc(dev, sizeof(*isp), GFP_KERNEL);
@@ -498,6 +504,7 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
udc = &isp->udc;
hcd->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
+ udc->is_isp1763 = !!(devflags & ISP1760_FLAG_ISP1763);
if (!hcd->is_isp1763 && (devflags & ISP1760_FLAG_BUS_WIDTH_8)) {
dev_err(dev, "isp1760/61 do not support data width 8\n");
@@ -507,9 +514,13 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
if (hcd->is_isp1763) {
hc_regmap = &isp1763_hc_regmap_conf;
hc_reg_fields = &isp1763_hc_reg_fields[0];
+ dc_regmap = &isp1763_dc_regmap_conf;
+ dc_reg_fields = &isp1763_dc_reg_fields[0];
} else {
hc_regmap = &isp1760_hc_regmap_conf;
hc_reg_fields = &isp1760_hc_reg_fields[0];
+ dc_regmap = &isp1761_dc_regmap_conf;
+ dc_reg_fields = &isp1761_dc_reg_fields[0];
}
isp->rst_gpio = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
@@ -532,14 +543,12 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
hcd->fields[i] = f;
}
- udc->regs = devm_regmap_init_mmio(dev, hcd->base,
- &isp1761_dc_regmap_conf);
+ udc->regs = devm_regmap_init_mmio(dev, hcd->base, dc_regmap);
if (IS_ERR(udc->regs))
return PTR_ERR(udc->regs);
for (i = 0; i < DC_FIELD_MAX; i++) {
- f = devm_regmap_field_alloc(dev, udc->regs,
- isp1761_dc_reg_fields[i]);
+ f = devm_regmap_field_alloc(dev, udc->regs, dc_reg_fields[i]);
if (IS_ERR(f))
return PTR_ERR(f);
@@ -562,7 +571,7 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
return ret;
}
- if (IS_ENABLED(CONFIG_USB_ISP1761_UDC) && !udc_disabled) {
+ if (IS_ENABLED(CONFIG_USB_ISP1761_UDC) && udc_enabled) {
ret = isp1760_udc_register(isp, irq, irqflags);
if (ret < 0) {
isp1760_hcd_unregister(hcd);
@@ -243,8 +243,50 @@ enum isp176x_device_controller_fields {
DC_EPENABLE, DC_ENDPTYP,
/* DC_FRAMENUM */
DC_FRAMENUM, DC_UFRAMENUM,
+ /* DC_CHIP_ID */
+ DC_CHIP_ID_HIGH, DC_CHIP_ID_LOW,
+ /* DC_SCRATCH */
+ DC_SCRATCH,
/* Last element */
DC_FIELD_MAX,
};
+/* ISP1763 */
+/* Initialization Registers */
+#define ISP1763_DC_ADDRESS 0x00
+#define ISP1763_DC_MODE 0x0c
+#define ISP1763_DC_INTCONF 0x10
+#define ISP1763_DC_INTENABLE 0x14
+
+/* Data Flow Registers */
+#define ISP1763_DC_EPMAXPKTSZ 0x04
+#define ISP1763_DC_EPTYPE 0x08
+
+#define ISP1763_DC_BUFLEN 0x1c
+#define ISP1763_DC_BUFSTAT 0x1e
+#define ISP1763_DC_DATAPORT 0x20
+
+#define ISP1763_DC_CTRLFUNC 0x28
+#define ISP1763_DC_EPINDEX 0x2c
+
+/* DMA Registers */
+#define ISP1763_DC_DMACMD 0x30
+#define ISP1763_DC_DMATXCOUNT 0x34
+#define ISP1763_DC_DMACONF 0x38
+#define ISP1763_DC_DMAHW 0x3c
+#define ISP1763_DC_DMAINTREASON 0x50
+#define ISP1763_DC_DMAINTEN 0x54
+#define ISP1763_DC_DMAEP 0x58
+#define ISP1763_DC_DMABURSTCOUNT 0x64
+
+/* General Registers */
+#define ISP1763_DC_INTERRUPT 0x18
+#define ISP1763_DC_CHIPID_LOW 0x70
+#define ISP1763_DC_CHIPID_HIGH 0x72
+#define ISP1763_DC_FRAMENUM 0x74
+#define ISP1763_DC_SCRATCH 0x78
+#define ISP1763_DC_UNLOCKDEV 0x7c
+#define ISP1763_DC_INTPULSEWIDTH 0x80
+#define ISP1763_DC_TESTMODE 0x84
+
#endif
@@ -1151,6 +1151,10 @@ static void isp1760_udc_disconnect(struct isp1760_udc *udc)
static void isp1760_udc_init_hw(struct isp1760_udc *udc)
{
+ u32 intconf = udc->is_isp1763 ? ISP1763_DC_INTCONF : ISP176x_DC_INTCONF;
+ u32 intena = udc->is_isp1763 ? ISP1763_DC_INTENABLE :
+ ISP176x_DC_INTENABLE;
+
/*
* The device controller currently shares its interrupt with the host
* controller, the DC_IRQ polarity and signaling mode are ignored. Set
@@ -1160,11 +1164,11 @@ static void isp1760_udc_init_hw(struct isp1760_udc *udc)
* ACK tokens only (and NYET for the out pipe). The default
* configuration also generates an interrupt on the first NACK token.
*/
- isp1760_reg_write(udc->regs, ISP176x_DC_INTCONF,
+ isp1760_reg_write(udc->regs, intconf,
ISP176x_DC_CDBGMOD_ACK | ISP176x_DC_DDBGMODIN_ACK |
ISP176x_DC_DDBGMODOUT_ACK);
- isp1760_reg_write(udc->regs, ISP176x_DC_INTENABLE, DC_IEPRXTX(7) |
+ isp1760_reg_write(udc->regs, intena, DC_IEPRXTX(7) |
DC_IEPRXTX(6) | DC_IEPRXTX(5) | DC_IEPRXTX(4) |
DC_IEPRXTX(3) | DC_IEPRXTX(2) | DC_IEPRXTX(1) |
DC_IEPRXTX(0) | ISP176x_DC_IEP0SETUP |
@@ -1304,13 +1308,14 @@ static int isp1760_udc_start(struct usb_gadget *gadget,
static int isp1760_udc_stop(struct usb_gadget *gadget)
{
struct isp1760_udc *udc = gadget_to_udc(gadget);
+ u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
unsigned long flags;
dev_dbg(udc->isp->dev, "%s\n", __func__);
del_timer_sync(&udc->vbus_timer);
- isp1760_reg_write(udc->regs, ISP176x_DC_MODE, 0);
+ isp1760_reg_write(udc->regs, mode_reg, 0);
spin_lock_irqsave(&udc->lock, flags);
udc->driver = NULL;
@@ -1332,15 +1337,30 @@ static const struct usb_gadget_ops isp1760_udc_ops = {
* Interrupt Handling
*/
+static u32 isp1760_udc_irq_get_status(struct isp1760_udc *udc)
+{
+ u32 status;
+
+ if (udc->is_isp1763) {
+ status = isp1760_reg_read(udc->regs, ISP1763_DC_INTERRUPT)
+ & isp1760_reg_read(udc->regs, ISP1763_DC_INTENABLE);
+ isp1760_reg_write(udc->regs, ISP1763_DC_INTERRUPT, status);
+ } else {
+ status = isp1760_reg_read(udc->regs, ISP176x_DC_INTERRUPT)
+ & isp1760_reg_read(udc->regs, ISP176x_DC_INTENABLE);
+ isp1760_reg_write(udc->regs, ISP176x_DC_INTERRUPT, status);
+ }
+
+ return status;
+}
+
static irqreturn_t isp1760_udc_irq(int irq, void *dev)
{
struct isp1760_udc *udc = dev;
unsigned int i;
u32 status;
- status = isp1760_reg_read(udc->regs, ISP176x_DC_INTERRUPT)
- & isp1760_reg_read(udc->regs, ISP176x_DC_INTENABLE);
- isp1760_reg_write(udc->regs, ISP176x_DC_INTERRUPT, status);
+ status = isp1760_udc_irq_get_status(udc);
if (status & DC_IEVBUS) {
dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
@@ -1475,6 +1495,7 @@ static void isp1760_udc_init_eps(struct isp1760_udc *udc)
static int isp1760_udc_init(struct isp1760_udc *udc)
{
+ u32 mode_reg = udc->is_isp1763 ? ISP1763_DC_MODE : ISP176x_DC_MODE;
u16 scratch;
u32 chipid;
@@ -1484,9 +1505,10 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
* register, and reading the scratch register value back. The chip ID
* and scratch register contents must match the expected values.
*/
- isp1760_reg_write(udc->regs, ISP176x_DC_SCRATCH, 0xbabe);
- chipid = isp1760_reg_read(udc->regs, ISP176x_DC_CHIPID);
- scratch = isp1760_reg_read(udc->regs, ISP176x_DC_SCRATCH);
+ isp1760_udc_write(udc, DC_SCRATCH, 0xbabe);
+ chipid = isp1760_udc_read(udc, DC_CHIP_ID_HIGH) << 16;
+ chipid |= isp1760_udc_read(udc, DC_CHIP_ID_LOW);
+ scratch = isp1760_udc_read(udc, DC_SCRATCH);
if (scratch != 0xbabe) {
dev_err(udc->isp->dev,
@@ -1495,7 +1517,8 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
return -ENODEV;
}
- if (chipid != 0x00011582 && chipid != 0x00158210) {
+ if (chipid != 0x00011582 && chipid != 0x00158210 &&
+ chipid != 0x00176320) {
dev_err(udc->isp->dev, "udc: invalid chip ID 0x%08x\n", chipid);
return -ENODEV;
}
@@ -1503,7 +1526,7 @@ static int isp1760_udc_init(struct isp1760_udc *udc)
/* Reset the device controller. */
isp1760_udc_set(udc, DC_SFRESET);
usleep_range(10000, 11000);
- isp1760_reg_write(udc->regs, ISP176x_DC_MODE, 0);
+ isp1760_reg_write(udc->regs, mode_reg, 0);
usleep_range(10000, 11000);
return 0;
@@ -84,6 +84,7 @@ struct isp1760_udc {
u16 ep0_length;
bool connected;
+ bool is_isp1763;
unsigned int devstatus;
};
Besides the already host mode support add peripheral mode support for the isp1763 IP from the isp1760 family. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- drivers/usb/isp1760/isp1760-core.c | 25 +++++++++++------ drivers/usb/isp1760/isp1760-regs.h | 42 ++++++++++++++++++++++++++++ drivers/usb/isp1760/isp1760-udc.c | 45 ++++++++++++++++++++++-------- drivers/usb/isp1760/isp1760-udc.h | 1 + 4 files changed, 94 insertions(+), 19 deletions(-)