@@ -217,7 +217,7 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
goto bad_desc;
}
skip:
- /* Communcation class functions with bmCapabilities are not
+ /* Communication class functions with bmCapabilities are not
* RNDIS. But some Wireless class RNDIS functions use
* bmCapabilities for their own purpose. The failsafe is
* therefore applied only to Communication class RNDIS
@@ -300,8 +300,8 @@ static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb
return NULL;
}
-/* Some devices are known to send Neigbor Solicitation messages and
- * require Neigbor Advertisement replies. The IPv6 core will not
+/* Some devices are known to send Neighbor Solicitation messages and
+ * require Neighbor Advertisement replies. The IPv6 core will not
* respond since IFF_NOARP is set, so we must handle them ourselves.
*/
static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
@@ -588,7 +588,7 @@ static const struct driver_info cdc_mbim_info_zlp = {
*
* Note: The current implementation of this feature restricts each NTB
* to a single NDP, implying that multiplexed sessions cannot share an
- * NTB. This might affect performace for multiplexed sessions.
+ * NTB. This might affect performance for multiplexed sessions.
*/
static const struct driver_info cdc_mbim_info_ndp_to_end = {
.description = "CDC MBIM",
@@ -628,7 +628,7 @@ static void cdc_ncm_set_dgram_size(struct usbnet *dev, int new_size)
/* set MTU to max supported by the device if necessary */
dev->net->mtu = min_t(int, dev->net->mtu, ctx->max_datagram_size - cdc_ncm_eth_hlen(dev));
- /* do not exceed operater preferred MTU */
+ /* do not exceed operator preferred MTU */
if (ctx->mbim_extended_desc) {
mbim_mtu = le16_to_cpu(ctx->mbim_extended_desc->wMTU);
if (mbim_mtu != 0 && mbim_mtu < dev->net->mtu)
@@ -685,7 +685,7 @@ static int cdc_ncm_setup(struct usbnet *dev)
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
u32 def_rx, def_tx;
- /* be conservative when selecting intial buffer size to
+ /* be conservative when selecting initial buffer size to
* increase the number of hosts this will work for
*/
def_rx = min_t(u32, CDC_NCM_NTB_DEF_SIZE_RX,
@@ -61,7 +61,7 @@ static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
int need_tail = 0;
__le16 *len;
- /* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */
+ /* if packet and our header is smaller than 64 pad to 64 (+ ZLP) */
if ((pack_with_header_len) < dev->maxpacket)
need_tail = dev->maxpacket - pack_with_header_len + 1;
/*
@@ -298,7 +298,7 @@ struct lan78xx_net;
struct lan78xx_priv {
struct lan78xx_net *dev;
u32 rfe_ctl;
- u32 mchash_table[DP_SEL_VHF_HASH_LEN]; /* multicat hash table */
+ u32 mchash_table[DP_SEL_VHF_HASH_LEN]; /* multicast hash table */
u32 pfilter_table[NUM_OF_MAF][2]; /* perfect filter table */
u32 vlan_table[DP_SEL_VHF_VLAN_LEN];
struct mutex dataport_mutex; /* for dataport access */
@@ -31,7 +31,7 @@
* Windows/Mac drivers do send a couple of such frames to the device
* during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
* seems to be) a flag in the .dummy_flags. This doesn't seem necessary
- * for modem operation but can possibly be used for GPS or other funcitons.
+ * for modem operation but can possibly be used for GPS or other functions.
*/
struct vl600_frame_hdr {
@@ -72,7 +72,7 @@ static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
/* ARP packets don't go through, but they're also of no use. The
* subnet has only two hosts anyway: us and the gateway / DHCP
* server (probably simulated by modem firmware or network operator)
- * whose address changes everytime we connect to the intarwebz and
+ * whose address changes every time we connect to the intarwebz and
* who doesn't bother answering ARP requests either. So hardware
* addresses have no meaning, the destination and the source of every
* packet depend only on whether it is on the IN or OUT endpoint. */
@@ -2445,7 +2445,7 @@ static int rx_bottom(struct r8152 *tp, int budget)
unsigned int pkt_len, rx_frag_head_sz;
struct sk_buff *skb;
- /* limite the skb numbers for rx_queue */
+ /* limit the skb numbers for rx_queue */
if (unlikely(skb_queue_len(&tp->rx_queue) >= 1000))
break;
@@ -8211,7 +8211,7 @@ static int rtl8152_post_reset(struct usb_interface *intf)
if (!tp)
return 0;
- /* reset the MAC adddress in case of policy change */
+ /* reset the MAC address in case of policy change */
if (determine_ethernet_addr(tp, &sa) >= 0) {
rtnl_lock();
dev_set_mac_address (tp->netdev, &sa, NULL);
@@ -324,7 +324,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
* For RX we handle drivers that zero-pad to end-of-packet.
* Don't let userspace change these settings.
*
- * NOTE: there still seems to be wierdness here, as if we need
+ * NOTE: there still seems to be weirdness here, as if we need
* to do some more things to make sure WinCE targets accept this.
* They default to jumbograms of 8KB or 16KB, which is absurd
* for such low data rates and which is also more than Linux
wierdness ==> weirdness multicat ==> multicast limite ==> limit adddress ==> address operater ==> operator intial ==> initial smaler ==> smaller Communcation ==> Communication funcitons ==> functions everytime ==> every time Neigbor ==> Neighbor performace ==> performance Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> --- drivers/net/usb/cdc_ether.c | 2 +- drivers/net/usb/cdc_mbim.c | 6 +++--- drivers/net/usb/cdc_ncm.c | 4 ++-- drivers/net/usb/int51x1.c | 2 +- drivers/net/usb/lan78xx.c | 2 +- drivers/net/usb/lg-vl600.c | 4 ++-- drivers/net/usb/r8152.c | 4 ++-- drivers/net/usb/rndis_host.c | 2 +- 8 files changed, 13 insertions(+), 13 deletions(-)