diff mbox series

[v11,2/5] USB: misc: Add onboard_usb_hub driver

Message ID 20210604144027.v11.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid (mailing list archive)
State Superseded
Headers show
Series USB: misc: Add onboard_usb_hub driver | expand

Commit Message

Matthias Kaehlcke June 4, 2021, 9:40 p.m. UTC 
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.

Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.

Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).

Note: the current series only supports hubs connected directly to
a root hub (through xhci-plat), support for other configurations
could be added if needed.

Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---

Changes in v11:
- added onboard_hub_create/destroy_pdevs() helpers, to support multiple onboard
  hubs connected to the same parent hub
- don't include ‘onboard_hub.h’ from the onboard hub driver
- updated commit message
- added ‘Acked-by' from Alan

Changes in v10:
- always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m

Changes in v9:
- none

Changes in v8:
- none

Changes in v7:
- don't declare stub for of_is_onboard_usb_hub() when
  CONFIG_COMPILE_TEST is defined

Changes in v6:
- use 'companion-hub' to locate the platform device, instead of
  scanning through the nodes of the parent
- added ABI documentation for 'always_powered_in_suspend'
- sysfs_emit() instead of sprintf() in always_powered_in_suspend_show()
- register sysfs attribute through driver.dev_groups
- evaluate return value of driver_attach() in _probe()
- use dev_warn() instead of WARN_ON() in _probe()
- include 'onboard_hub.h'

Changes in v5:
- the platform device is now instantiated from the same DT node
  as the 'primary' USB hub device
  - use the USB compatible strings for the platform device
  - refactored _find_onboard_hub() to search the parents child
    nodes for a platform device with a matching compatible string
  - added exported function of_is_onboard_usb_hub() to allow other
    drivers (like xhci_plat) to check if one of their child DT nodes
    is a supported hub
- use late suspend to make sure info about wakeup enabled descendants
  is updated
- call driver_attach() for the USB driver in onboard_hub_probe() to
  make sure the driver is re-attached after the device_release_driver()
  calls in onboard_hub_remove()
- renamed sysfs attribute 'power_off_in_suspend' to
  'always_powered_in_suspend'
- added sysfs symlinks between platform device and USB devices
- marked 'onboard_hub_pm_ops' as __maybe_unused
- removed 'realtek' compatible string which is not needed at this
  point
- fix log for regulator_disable() failure

Changes in v4:
- updated Kconfig documentation
- changed the loop in onboard_hub_remove() to release the hub lock
  before unbinding the USB device and make self deadlock prevention
  less clunky
- fixed return value in onboard_hub_usbdev_probe()
- added entry to MAINTAINERS file

Changes in v3:
- updated the commit message
- updated description in Kconfig
- remove include of 'core/usb.h'
- use 'is_powered_on' flag instead of 'has_wakeup_capable_descendants'
- added 'going_away' flag to struct onboard_hub
  - don't allow adding new USB devices when the platform device is going away
  - don't bother with deleting the list item in onboard_hub_remove_usbdev()
    when the platform device is going away
- don't assume in onboard_hub_suspend() that all USB hub devices are
  connected to the same controller
- removed unnecessary devm_kfree() from onboard_hub_remove_usbdev()
- fixed error handling in onboard_hub_remove_usbdev()
- use kstrtobool() instead of strtobool() in power_off_in_suspend_store()
- unbind USB devices in onboard_hub_remove() to avoid dangling references
  to the platform device
- moved put_device() for platform device to _find_onboard_hub()
- changed return value of onboard_hub_remove_usbdev() to void
- evaluate return value of onboard_hub_add_usbdev()
- register 'power_off_in_suspend' as managed device attribute
- use USB_DEVICE macro instead manual initialization
- add unwinding to onboard_hub_init()
- updated MODULE_DESCRIPTION
- use module_init() instead of device_initcall()

Changes in v2:
- check wakeup enabled state of the USB controller instead of
  using 'wakeup-source' property
- use sysfs attribute instead of DT property to determine if
  the hub should be powered off at all during system suspend
- added missing brace in onboard_hub_suspend()
- updated commit message
- use pm_ptr for pm_ops as suggested by Alan

Changes in v1:
- renamed the driver to 'onboard_usb_hub'
- single file for platform and USB driver
- USB hub devices register with the platform device
  - the DT includes a phandle of the platform device
- the platform device now controls when power is turned off
- the USB driver became a very thin subclass of the generic USB
  driver
- enabled autosuspend support

 .../sysfs-bus-platform-onboard-usb-hub        |   8 +
 MAINTAINERS                                   |   7 +
 drivers/usb/misc/Kconfig                      |  17 +
 drivers/usb/misc/Makefile                     |   1 +
 drivers/usb/misc/onboard_usb_hub.c            | 496 ++++++++++++++++++
 include/linux/usb/onboard_hub.h               |  18 +
 6 files changed, 547 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
 create mode 100644 drivers/usb/misc/onboard_usb_hub.c
 create mode 100644 include/linux/usb/onboard_hub.h

Comments

kernel test robot June 4, 2021, 11:18 p.m. UTC | #1 
Hi Matthias,

I love your patch! Perhaps something to improve:

[auto build test WARNING on next-20210604]
[also build test WARNING on v5.13-rc4]
[cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
config: arc-allyesconfig (attached as .config)
compiler: arceb-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
        git checkout 7107f99a12058b7147342c6f763d026102bd6606
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
     400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
     458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
         |      ^~~~~~~~~~~~~~~~~~~~~~~~~


vim +/onboard_hub_create_pdevs +400 drivers/usb/misc/onboard_usb_hub.c

   394	
   395	/*
   396	 * Creates a platform device for each supported onboard hub that is connected to
   397	 * the given parent hub. To keep track of the platform devices they are added to
   398	 * a list that is owned by the parent hub.
   399	 */
 > 400	void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
   401	{
   402		int i;
   403		phandle ph;
   404		struct device_node *np, *npc;
   405		struct platform_device *pdev;
   406		struct pdev_list_entry *pdle;
   407	
   408		for (i = 1; i <= parent_hub->maxchild; i++) {
   409			np = usb_of_get_device_node(parent_hub, i);
   410			if (!np)
   411				continue;
   412	
   413			if (!of_is_onboard_usb_hub(np))
   414				goto node_put;
   415	
   416			if (of_property_read_u32(np, "companion-hub", &ph))
   417				goto node_put;
   418	
   419			npc = of_find_node_by_phandle(ph);
   420			if (!npc)
   421				goto node_put;
   422	
   423			pdev = of_find_device_by_node(npc);
   424			of_node_put(npc);
   425	
   426			if (pdev) {
   427				/* the companion hub already has a platform device, nothing to do here */
   428				put_device(&pdev->dev);
   429				goto node_put;
   430			}
   431	
   432			pdev = of_platform_device_create(np, NULL, &parent_hub->dev);
   433			if (pdev) {
   434				pdle = kzalloc(sizeof(*pdle), GFP_KERNEL);
   435				if (!pdle)
   436					goto node_put;
   437	
   438				INIT_LIST_HEAD(&pdle->node);
   439	
   440				pdle->pdev = pdev;
   441				list_add(&pdle->node, pdev_list);
   442			} else {
   443				dev_err(&parent_hub->dev,
   444					"failed to create platform device for onboard hub '%s'\n",
   445					of_node_full_name(np));
   446			}
   447	
   448		node_put:
   449			of_node_put(np);
   450		}
   451	}
   452	EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs);
   453	
   454	/*
   455	 * Destroys the platform devices in the given list and frees the memory associated
   456	 * with the list entry.
   457	 */
 > 458	void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
   459	{
   460		struct pdev_list_entry *pdle, *tmp;
   461	
   462		list_for_each_entry_safe(pdle, tmp, pdev_list, node) {
   463			of_platform_device_destroy(&pdle->pdev->dev, NULL);
   464			kfree(pdle);
   465		}
   466	}
   467	EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs);
   468	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Matthias Kaehlcke June 7, 2021, 5:51 p.m. UTC | #2 
On Sat, Jun 05, 2021 at 07:18:38AM +0800, kernel test robot wrote:
> Hi Matthias,
> 
> I love your patch! Perhaps something to improve:
> 
> [auto build test WARNING on next-20210604]
> [also build test WARNING on v5.13-rc4]
> [cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
> 
> url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
> config: arc-allyesconfig (attached as .config)
> compiler: arceb-elf-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
>         git checkout 7107f99a12058b7147342c6f763d026102bd6606
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All warnings (new ones prefixed by >>):
> 
> >> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
>      400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
>          |      ^~~~~~~~~~~~~~~~~~~~~~~~
> >> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
>      458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
>          |      ^~~~~~~~~~~~~~~~~~~~~~~~~

Oh, I wasn't aware that prototypes are required for public functions.

To avoid too much version churn I'll wait a bit for further comments before
sending a v12 with the prototypes.
Greg KH June 7, 2021, 6:23 p.m. UTC | #3 
On Mon, Jun 07, 2021 at 10:51:57AM -0700, Matthias Kaehlcke wrote:
> On Sat, Jun 05, 2021 at 07:18:38AM +0800, kernel test robot wrote:
> > Hi Matthias,
> > 
> > I love your patch! Perhaps something to improve:
> > 
> > [auto build test WARNING on next-20210604]
> > [also build test WARNING on v5.13-rc4]
> > [cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
> > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > And when submitting patch, we suggest to use '--base' as documented in
> > https://git-scm.com/docs/git-format-patch]
> > 
> > url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
> > config: arc-allyesconfig (attached as .config)
> > compiler: arceb-elf-gcc (GCC) 9.3.0
> > reproduce (this is a W=1 build):
> >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> >         chmod +x ~/bin/make.cross
> >         # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
> >         git remote add linux-review https://github.com/0day-ci/linux
> >         git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> >         git checkout 7107f99a12058b7147342c6f763d026102bd6606
> >         # save the attached .config to linux build tree
> >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> > 
> > If you fix the issue, kindly add following tag as appropriate
> > Reported-by: kernel test robot <lkp@intel.com>
> > 
> > All warnings (new ones prefixed by >>):
> > 
> > >> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
> >      400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
> >          |      ^~~~~~~~~~~~~~~~~~~~~~~~
> > >> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
> >      458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
> >          |      ^~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Oh, I wasn't aware that prototypes are required for public functions.

How else can they be called?
Matthias Kaehlcke June 7, 2021, 6:32 p.m. UTC | #4 
On Mon, Jun 07, 2021 at 08:23:43PM +0200, Greg Kroah-Hartman wrote:
> On Mon, Jun 07, 2021 at 10:51:57AM -0700, Matthias Kaehlcke wrote:
> > On Sat, Jun 05, 2021 at 07:18:38AM +0800, kernel test robot wrote:
> > > Hi Matthias,
> > > 
> > > I love your patch! Perhaps something to improve:
> > > 
> > > [auto build test WARNING on next-20210604]
> > > [also build test WARNING on v5.13-rc4]
> > > [cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
> > > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > > And when submitting patch, we suggest to use '--base' as documented in
> > > https://git-scm.com/docs/git-format-patch]
> > > 
> > > url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > > base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
> > > config: arc-allyesconfig (attached as .config)
> > > compiler: arceb-elf-gcc (GCC) 9.3.0
> > > reproduce (this is a W=1 build):
> > >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > >         chmod +x ~/bin/make.cross
> > >         # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
> > >         git remote add linux-review https://github.com/0day-ci/linux
> > >         git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > >         git checkout 7107f99a12058b7147342c6f763d026102bd6606
> > >         # save the attached .config to linux build tree
> > >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> > > 
> > > If you fix the issue, kindly add following tag as appropriate
> > > Reported-by: kernel test robot <lkp@intel.com>
> > > 
> > > All warnings (new ones prefixed by >>):
> > > 
> > > >> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
> > >      400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
> > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~
> > > >> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
> > >      458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
> > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~~
> > 
> > Oh, I wasn't aware that prototypes are required for public functions.
> 
> How else can they be called?

Well, there are prototypes in include/linux/usb/onboard_hub.h, however this
header isn't included (anymore) by the driver itself to avoid conflicts
when COMPILE_TEST=y (see https://lkml.org/lkml/2021/5/25/975).
Greg KH June 8, 2021, 8:56 a.m. UTC | #5 
On Mon, Jun 07, 2021 at 11:32:31AM -0700, Matthias Kaehlcke wrote:
> On Mon, Jun 07, 2021 at 08:23:43PM +0200, Greg Kroah-Hartman wrote:
> > On Mon, Jun 07, 2021 at 10:51:57AM -0700, Matthias Kaehlcke wrote:
> > > On Sat, Jun 05, 2021 at 07:18:38AM +0800, kernel test robot wrote:
> > > > Hi Matthias,
> > > > 
> > > > I love your patch! Perhaps something to improve:
> > > > 
> > > > [auto build test WARNING on next-20210604]
> > > > [also build test WARNING on v5.13-rc4]
> > > > [cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
> > > > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > > > And when submitting patch, we suggest to use '--base' as documented in
> > > > https://git-scm.com/docs/git-format-patch]
> > > > 
> > > > url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > > > base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
> > > > config: arc-allyesconfig (attached as .config)
> > > > compiler: arceb-elf-gcc (GCC) 9.3.0
> > > > reproduce (this is a W=1 build):
> > > >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > >         chmod +x ~/bin/make.cross
> > > >         # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
> > > >         git remote add linux-review https://github.com/0day-ci/linux
> > > >         git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > > >         git checkout 7107f99a12058b7147342c6f763d026102bd6606
> > > >         # save the attached .config to linux build tree
> > > >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> > > > 
> > > > If you fix the issue, kindly add following tag as appropriate
> > > > Reported-by: kernel test robot <lkp@intel.com>
> > > > 
> > > > All warnings (new ones prefixed by >>):
> > > > 
> > > > >> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
> > > >      400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
> > > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~
> > > > >> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
> > > >      458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
> > > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~~
> > > 
> > > Oh, I wasn't aware that prototypes are required for public functions.
> > 
> > How else can they be called?
> 
> Well, there are prototypes in include/linux/usb/onboard_hub.h, however this
> header isn't included (anymore) by the driver itself to avoid conflicts
> when COMPILE_TEST=y (see https://lkml.org/lkml/2021/5/25/975).

Then that needs to be resolved please.

thanks,

greg k-h
Matthias Kaehlcke June 8, 2021, 8:54 p.m. UTC | #6 
On Tue, Jun 08, 2021 at 10:56:08AM +0200, Greg Kroah-Hartman wrote:
> On Mon, Jun 07, 2021 at 11:32:31AM -0700, Matthias Kaehlcke wrote:
> > On Mon, Jun 07, 2021 at 08:23:43PM +0200, Greg Kroah-Hartman wrote:
> > > On Mon, Jun 07, 2021 at 10:51:57AM -0700, Matthias Kaehlcke wrote:
> > > > On Sat, Jun 05, 2021 at 07:18:38AM +0800, kernel test robot wrote:
> > > > > Hi Matthias,
> > > > > 
> > > > > I love your patch! Perhaps something to improve:
> > > > > 
> > > > > [auto build test WARNING on next-20210604]
> > > > > [also build test WARNING on v5.13-rc4]
> > > > > [cannot apply to usb/usb-testing robh/for-next char-misc/char-misc-testing driver-core/driver-core-testing linus/master v5.13-rc4 v5.13-rc3 v5.13-rc2]
> > > > > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > > > > And when submitting patch, we suggest to use '--base' as documented in
> > > > > https://git-scm.com/docs/git-format-patch]
> > > > > 
> > > > > url:    https://github.com/0day-ci/linux/commits/Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > > > > base:    ccc252d2e818f6a479441119ad453c3ce7c7c461
> > > > > config: arc-allyesconfig (attached as .config)
> > > > > compiler: arceb-elf-gcc (GCC) 9.3.0
> > > > > reproduce (this is a W=1 build):
> > > > >         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> > > > >         chmod +x ~/bin/make.cross
> > > > >         # https://github.com/0day-ci/linux/commit/7107f99a12058b7147342c6f763d026102bd6606
> > > > >         git remote add linux-review https://github.com/0day-ci/linux
> > > > >         git fetch --no-tags linux-review Matthias-Kaehlcke/USB-misc-Add-onboard_usb_hub-driver/20210605-054213
> > > > >         git checkout 7107f99a12058b7147342c6f763d026102bd6606
> > > > >         # save the attached .config to linux build tree
> > > > >         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc 
> > > > > 
> > > > > If you fix the issue, kindly add following tag as appropriate
> > > > > Reported-by: kernel test robot <lkp@intel.com>
> > > > > 
> > > > > All warnings (new ones prefixed by >>):
> > > > > 
> > > > > >> drivers/usb/misc/onboard_usb_hub.c:400:6: warning: no previous prototype for 'onboard_hub_create_pdevs' [-Wmissing-prototypes]
> > > > >      400 | void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
> > > > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~
> > > > > >> drivers/usb/misc/onboard_usb_hub.c:458:6: warning: no previous prototype for 'onboard_hub_destroy_pdevs' [-Wmissing-prototypes]
> > > > >      458 | void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
> > > > >          |      ^~~~~~~~~~~~~~~~~~~~~~~~~
> > > > 
> > > > Oh, I wasn't aware that prototypes are required for public functions.
> > > 
> > > How else can they be called?
> > 
> > Well, there are prototypes in include/linux/usb/onboard_hub.h, however this
> > header isn't included (anymore) by the driver itself to avoid conflicts
> > when COMPILE_TEST=y (see https://lkml.org/lkml/2021/5/25/975).
> 
> Then that needs to be resolved please.

I already sent at least two versions exclusively to deal with related
issues, but there are still configurations that cause trouble, I
would appreciate some guidance here.

The latest issue was:

> I get a build error when I apply this series to my tree:
> 
> drivers/usb/misc/onboard_usb_hub.c:273:6: error: redefinition of ‘of_is_onboard_usb_hub’
>   273 | bool of_is_onboard_usb_hub(const struct device_node *np)
>       |      ^~~~~~~~~~~~~~~~~~~~~
> In file included from drivers/usb/misc/onboard_usb_hub.c:21:
> ./include/linux/usb/onboard_hub.h:9:20: note: previous definition of ‘of_is_onboard_usb_hub’ with type ‘bool(const struct device_node *)’ {aka ‘_Bool(const struct device_node *)’}
>     9 | static inline bool of_is_onboard_usb_hub(const struct device_node *np)
>       |                    ^~~~~~~~~~~~~~~~~~~~~

This was with the following declaration in the header:

  #ifdef CONFIG_USB_ONBOARD_HUB
  bool of_is_onboard_usb_hub(const struct device_node *np);
  #else
  static inline bool of_is_onboard_usb_hub(const struct device_node *np)
  {
    return false;
  }
  #endif

My initial assumption was that in this case the configuration was
COMPILE_TEST=y and USB_ONBOARD_HUB=n, however should onboard_usb_hub.c
even be compiled with USB_ONBOARD_HUB=n? IIUC COMPILE_TEST=y allows
to compile certain drivers even when they couldn't actually run/be
loaded on the target platform, but the config option would still need
to be enabled.

Then again, there was apparently an attempt to compile onboard_usb_hub.c,
however the static inline from the header was picked, which suggests
CONFIG_USB_ONBOARD_HUB=n.

Also please let me know if you have other comments besides the prototype
question, I'd prefer to avoid version churn if possible, this series
already had a bit of that primarily due to the prototype issue.

Thanks

Matthias
Greg KH June 9, 2021, 4:47 a.m. UTC | #7 
On Tue, Jun 08, 2021 at 01:54:55PM -0700, Matthias Kaehlcke wrote:
> Also please let me know if you have other comments besides the prototype
> question, I'd prefer to avoid version churn if possible, this series
> already had a bit of that primarily due to the prototype issue.

When the kernel test robot finds issues, I drop the patches from my
review queue as I don't have time to review stuff with obvious issues,
so I do not even have the changes around to review at the moment.  I
have plenty of patches that do not have build problems to review :)

Fix them up and resend, there's nothing wrong with sending lots of
versions if you have to resolve problems.

thanks,

greg k-h
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
new file mode 100644
index 000000000000..e981d83648e6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
@@ -0,0 +1,8 @@ 
+What:		/sys/bus/platform/devices/<dev>/always_powered_in_suspend
+Date:		March 2021
+KernelVersion:	5.13
+Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
+		linux-usb@vger.kernel.org
+Description:
+		(RW) Controls whether the USB hub remains always powered
+		during system suspend or not.
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index bd7aff0c120f..32220210345d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13613,6 +13613,13 @@  S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/ov9734.c
 
+ONBOARD USB HUB DRIVER
+M:	Matthias Kaehlcke <mka@chromium.org>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/onboard_usb_hub.yaml
+F:	drivers/usb/misc/onboard_usb_hub.c
+
 ONENAND FLASH DRIVER
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-mtd@lists.infradead.org
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 8f1144359012..f534269fbb20 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -284,3 +284,20 @@  config BRCM_USB_PINMAP
 	  This option enables support for remapping some USB external
 	  signals, which are typically on dedicated pins on the chip,
 	  to any gpio.
+
+config USB_ONBOARD_HUB
+	tristate "Onboard USB hub support"
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here if you want to support discrete onboard USB hubs that
+	  don't require an additional control bus for initialization, but
+	  need some nontrivial form of initialization, such as enabling a
+	  power regulator. An example for such a hub is the Realtek
+	  RTS5411.
+
+	  The driver can be configured to turn off the power of the hub
+	  during system suspend. This may reduce power consumption while
+	  the system is suspended.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called onboard_usb_hub.
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 5f4e598573ab..2c5aec6f1b26 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -32,3 +32,4 @@  obj-$(CONFIG_USB_CHAOSKEY)		+= chaoskey.o
 obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/
 obj-$(CONFIG_USB_LINK_LAYER_TEST)	+= lvstest.o
 obj-$(CONFIG_BRCM_USB_PINMAP)		+= brcmstb-usb-pinmap.o
+obj-$(CONFIG_USB_ONBOARD_HUB)		+= onboard_usb_hub.o
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
new file mode 100644
index 000000000000..a074d1bbfa8f
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -0,0 +1,496 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Driver for onboard USB hubs
+ *
+ * Copyright (c) 2020, Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+#include <linux/sysfs.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/of.h>
+
+static struct usb_device_driver onboard_hub_usbdev_driver;
+
+/************************** Platform driver **************************/
+
+struct udev_node {
+	struct usb_device *udev;
+	struct list_head list;
+};
+
+struct onboard_hub {
+	struct regulator *vdd;
+	struct device *dev;
+	bool always_powered_in_suspend;
+	bool is_powered_on;
+	bool going_away;
+	struct list_head udev_list;
+	struct mutex lock;
+};
+
+static int onboard_hub_power_on(struct onboard_hub *hub)
+{
+	int err;
+
+	err = regulator_enable(hub->vdd);
+	if (err) {
+		dev_err(hub->dev, "failed to enable regulator: %d\n", err);
+		return err;
+	}
+
+	hub->is_powered_on = true;
+
+	return 0;
+}
+
+static int onboard_hub_power_off(struct onboard_hub *hub)
+{
+	int err;
+
+	err = regulator_disable(hub->vdd);
+	if (err) {
+		dev_err(hub->dev, "failed to disable regulator: %d\n", err);
+		return err;
+	}
+
+	hub->is_powered_on = false;
+
+	return 0;
+}
+
+static int __maybe_unused onboard_hub_suspend(struct device *dev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+	struct udev_node *node;
+	bool power_off;
+	int rc = 0;
+
+	if (hub->always_powered_in_suspend)
+		return 0;
+
+	power_off = true;
+
+	mutex_lock(&hub->lock);
+
+	list_for_each_entry(node, &hub->udev_list, list) {
+		if (!device_may_wakeup(node->udev->bus->controller))
+			continue;
+
+		if (usb_wakeup_enabled_descendants(node->udev)) {
+			power_off = false;
+			break;
+		}
+	}
+
+	mutex_unlock(&hub->lock);
+
+	if (power_off)
+		rc = onboard_hub_power_off(hub);
+
+	return rc;
+}
+
+static int __maybe_unused onboard_hub_resume(struct device *dev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+	int rc = 0;
+
+	if (!hub->is_powered_on)
+		rc = onboard_hub_power_on(hub);
+
+	return rc;
+}
+
+static int onboard_hub_add_usbdev(struct onboard_hub *hub, struct usb_device *udev)
+{
+	struct udev_node *node;
+	char link_name[64];
+	int ret = 0;
+
+	mutex_lock(&hub->lock);
+
+	if (hub->going_away) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	node = devm_kzalloc(hub->dev, sizeof(*node), GFP_KERNEL);
+	if (!node) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	node->udev = udev;
+
+	list_add(&node->list, &hub->udev_list);
+
+	snprintf(link_name, sizeof(link_name), "usb_dev.%s", dev_name(&udev->dev));
+	WARN_ON(sysfs_create_link(&hub->dev->kobj, &udev->dev.kobj, link_name));
+
+unlock:
+	mutex_unlock(&hub->lock);
+
+	return ret;
+}
+
+static void onboard_hub_remove_usbdev(struct onboard_hub *hub, struct usb_device *udev)
+{
+	struct udev_node *node;
+	char link_name[64];
+
+	snprintf(link_name, sizeof(link_name), "usb_dev.%s", dev_name(&udev->dev));
+	sysfs_remove_link(&hub->dev->kobj, link_name);
+
+	mutex_lock(&hub->lock);
+
+	list_for_each_entry(node, &hub->udev_list, list) {
+		if (node->udev == udev) {
+			list_del(&node->list);
+			break;
+		}
+	}
+
+	mutex_unlock(&hub->lock);
+}
+
+static ssize_t always_powered_in_suspend_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%d\n", hub->always_powered_in_suspend);
+}
+
+static ssize_t always_powered_in_suspend_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct onboard_hub *hub = dev_get_drvdata(dev);
+	bool val;
+	int ret;
+
+	ret = kstrtobool(buf, &val);
+	if (ret < 0)
+		return ret;
+
+	hub->always_powered_in_suspend = val;
+
+	return count;
+}
+static DEVICE_ATTR_RW(always_powered_in_suspend);
+
+static struct attribute *onboard_hub_attrs[] = {
+	&dev_attr_always_powered_in_suspend.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(onboard_hub);
+
+static int onboard_hub_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct onboard_hub *hub;
+	int err;
+
+	hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	hub->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(hub->vdd))
+		return PTR_ERR(hub->vdd);
+
+	hub->dev = dev;
+	mutex_init(&hub->lock);
+	INIT_LIST_HEAD(&hub->udev_list);
+
+	dev_set_drvdata(dev, hub);
+
+	err = onboard_hub_power_on(hub);
+	if (err)
+		return err;
+
+	/*
+	 * The USB driver might have been detached from the USB devices by
+	 * onboard_hub_remove(), make sure to re-attach it if needed.
+	 */
+	err = driver_attach(&onboard_hub_usbdev_driver.drvwrap.driver);
+	if (err) {
+		onboard_hub_power_off(hub);
+		return err;
+	}
+
+	return 0;
+}
+
+static int onboard_hub_remove(struct platform_device *pdev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(&pdev->dev);
+	struct udev_node *node;
+	struct usb_device *udev;
+
+	hub->going_away = true;
+
+	mutex_lock(&hub->lock);
+
+	/* unbind the USB devices to avoid dangling references to this device */
+	while (!list_empty(&hub->udev_list)) {
+		node = list_first_entry(&hub->udev_list, struct udev_node, list);
+		udev = node->udev;
+
+		/*
+		 * Unbinding the driver will call onboard_hub_remove_usbdev(),
+		 * which acquires hub->lock.  We must release the lock first.
+		 */
+		get_device(&udev->dev);
+		mutex_unlock(&hub->lock);
+		device_release_driver(&udev->dev);
+		put_device(&udev->dev);
+		mutex_lock(&hub->lock);
+	}
+
+	mutex_unlock(&hub->lock);
+
+	return onboard_hub_power_off(hub);
+}
+
+static const struct of_device_id onboard_hub_match[] = {
+	{ .compatible = "usbbda,411" },
+	{ .compatible = "usbbda,5411" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, onboard_hub_match);
+
+static bool of_is_onboard_usb_hub(const struct device_node *np)
+{
+	return !!of_match_node(onboard_hub_match, np);
+}
+
+static const struct dev_pm_ops __maybe_unused onboard_hub_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(onboard_hub_suspend, onboard_hub_resume)
+};
+
+static struct platform_driver onboard_hub_driver = {
+	.probe = onboard_hub_probe,
+	.remove = onboard_hub_remove,
+
+	.driver = {
+		.name = "onboard-usb-hub",
+		.of_match_table = onboard_hub_match,
+		.pm = pm_ptr(&onboard_hub_pm_ops),
+		.dev_groups = onboard_hub_groups,
+	},
+};
+
+/************************** USB driver **************************/
+
+#define VENDOR_ID_REALTEK	0x0bda
+
+/*
+ * Returns the onboard_hub platform device that is associated with the USB
+ * device passed as parameter.
+ */
+static struct onboard_hub *_find_onboard_hub(struct device *dev)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	phandle ph;
+
+	pdev = of_find_device_by_node(dev->of_node);
+	if (!pdev) {
+		if (of_property_read_u32(dev->of_node, "companion-hub", &ph)) {
+			dev_err(dev, "failed to read 'companion-hub' property\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		np = of_find_node_by_phandle(ph);
+		if (!np) {
+			dev_err(dev, "failed to find device node for companion hub\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		pdev = of_find_device_by_node(np);
+		of_node_put(np);
+
+		if (!pdev)
+			return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	put_device(&pdev->dev);
+
+	return dev_get_drvdata(&pdev->dev);
+}
+
+static int onboard_hub_usbdev_probe(struct usb_device *udev)
+{
+	struct device *dev = &udev->dev;
+	struct onboard_hub *hub;
+	int err;
+
+	/* ignore supported hubs without device tree node */
+	if (!dev->of_node)
+		return -ENODEV;
+
+	hub = _find_onboard_hub(dev);
+	if (IS_ERR(hub))
+		return PTR_ERR(hub);
+
+	dev_set_drvdata(dev, hub);
+
+	err = onboard_hub_add_usbdev(hub, udev);
+	if (err)
+		return err;
+
+	err = sysfs_create_link(&udev->dev.kobj, &hub->dev->kobj, "onboard_hub_dev");
+	if (err)
+		dev_warn(&udev->dev, "failed to create symlink to platform device: %d\n", err);
+
+	return 0;
+}
+
+static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
+{
+	struct onboard_hub *hub = dev_get_drvdata(&udev->dev);
+
+	sysfs_remove_link(&udev->dev.kobj, "onboard_hub_dev");
+
+	onboard_hub_remove_usbdev(hub, udev);
+}
+
+static const struct usb_device_id onboard_hub_id_table[] = {
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.0 */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.0 */
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, onboard_hub_id_table);
+
+static struct usb_device_driver onboard_hub_usbdev_driver = {
+
+	.name = "onboard-usb-hub",
+	.probe = onboard_hub_usbdev_probe,
+	.disconnect = onboard_hub_usbdev_disconnect,
+	.generic_subclass = 1,
+	.supports_autosuspend =	1,
+	.id_table = onboard_hub_id_table,
+};
+
+/*** Helpers for creating/destroying platform devices for onboard hubs ***/
+
+struct pdev_list_entry {
+	struct platform_device *pdev;
+	struct list_head node;
+};
+
+/*
+ * Creates a platform device for each supported onboard hub that is connected to
+ * the given parent hub. To keep track of the platform devices they are added to
+ * a list that is owned by the parent hub.
+ */
+void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
+{
+	int i;
+	phandle ph;
+	struct device_node *np, *npc;
+	struct platform_device *pdev;
+	struct pdev_list_entry *pdle;
+
+	for (i = 1; i <= parent_hub->maxchild; i++) {
+		np = usb_of_get_device_node(parent_hub, i);
+		if (!np)
+			continue;
+
+		if (!of_is_onboard_usb_hub(np))
+			goto node_put;
+
+		if (of_property_read_u32(np, "companion-hub", &ph))
+			goto node_put;
+
+		npc = of_find_node_by_phandle(ph);
+		if (!npc)
+			goto node_put;
+
+		pdev = of_find_device_by_node(npc);
+		of_node_put(npc);
+
+		if (pdev) {
+			/* the companion hub already has a platform device, nothing to do here */
+			put_device(&pdev->dev);
+			goto node_put;
+		}
+
+		pdev = of_platform_device_create(np, NULL, &parent_hub->dev);
+		if (pdev) {
+			pdle = kzalloc(sizeof(*pdle), GFP_KERNEL);
+			if (!pdle)
+				goto node_put;
+
+			INIT_LIST_HEAD(&pdle->node);
+
+			pdle->pdev = pdev;
+			list_add(&pdle->node, pdev_list);
+		} else {
+			dev_err(&parent_hub->dev,
+				"failed to create platform device for onboard hub '%s'\n",
+				of_node_full_name(np));
+		}
+
+	node_put:
+		of_node_put(np);
+	}
+}
+EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs);
+
+/*
+ * Destroys the platform devices in the given list and frees the memory associated
+ * with the list entry.
+ */
+void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
+{
+	struct pdev_list_entry *pdle, *tmp;
+
+	list_for_each_entry_safe(pdle, tmp, pdev_list, node) {
+		of_platform_device_destroy(&pdle->pdev->dev, NULL);
+		kfree(pdle);
+	}
+}
+EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs);
+
+/************************** Driver (de)registration **************************/
+
+static int __init onboard_hub_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&onboard_hub_driver);
+	if (ret)
+		return ret;
+
+	ret = usb_register_device_driver(&onboard_hub_usbdev_driver, THIS_MODULE);
+	if (ret)
+		platform_driver_unregister(&onboard_hub_driver);
+
+	return ret;
+}
+module_init(onboard_hub_init);
+
+static void __exit onboard_hub_exit(void)
+{
+	usb_deregister_device_driver(&onboard_hub_usbdev_driver);
+	platform_driver_unregister(&onboard_hub_driver);
+}
+module_exit(onboard_hub_exit);
+
+MODULE_AUTHOR("Matthias Kaehlcke <mka@chromium.org>");
+MODULE_DESCRIPTION("Driver for discrete onboard USB hubs");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/usb/onboard_hub.h b/include/linux/usb/onboard_hub.h
new file mode 100644
index 000000000000..fb6403c8f0e7
--- /dev/null
+++ b/include/linux/usb/onboard_hub.h
@@ -0,0 +1,18 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_USB_ONBOARD_HUB_H
+#define __LINUX_USB_ONBOARD_HUB_H
+
+struct usb_device;
+struct list_head;
+
+#ifdef CONFIG_USB_ONBOARD_HUB
+void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list);
+void onboard_hub_destroy_pdevs(struct list_head *pdev_list);
+#else
+static inline void onboard_hub_create_pdevs(struct usb_device *parent_hub,
+					    struct list_head *pdev_list) {}
+static inline void onboard_hub_destroy_pdevs(struct list_head *pdev_list) {}
+#endif
+
+#endif /* __LINUX_USB_ONBOARD_HUB_H */