diff mbox series

[net-next,v2,3/8] net: usb/phy: asix: add support for ax88772A/C PHYs

Message ID 20210607082727.26045-4-o.rempel@pengutronix.de (mailing list archive)
State Accepted
Commit dde25846925765a88df8964080098174495c1f10
Headers show
Series port asix ax88772 to the PHYlib | expand

Commit Message

Oleksij Rempel June 7, 2021, 8:27 a.m. UTC
Add support for build-in x88772A/C PHYs

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/ax88796b.c | 74 +++++++++++++++++++++++++++++++++++++-
 drivers/net/usb/Kconfig    |  1 +
 2 files changed, 74 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/ax88796b.c b/drivers/net/phy/ax88796b.c
index 79bf7ef1fcfd..457896337505 100644
--- a/drivers/net/phy/ax88796b.c
+++ b/drivers/net/phy/ax88796b.c
@@ -10,6 +10,8 @@ 
 #include <linux/mii.h>
 #include <linux/phy.h>
 
+#define PHY_ID_ASIX_AX88772A		0x003b1861
+#define PHY_ID_ASIX_AX88772C		0x003b1881
 #define PHY_ID_ASIX_AX88796B		0x003b1841
 
 MODULE_DESCRIPTION("Asix PHY driver");
@@ -39,7 +41,75 @@  static int asix_soft_reset(struct phy_device *phydev)
 	return genphy_soft_reset(phydev);
 }
 
-static struct phy_driver asix_driver[] = { {
+/* AX88772A is not working properly with some old switches (NETGEAR EN 108TP):
+ * after autoneg is done and the link status is reported as active, the MII_LPA
+ * register is 0. This issue is not reproducible on AX88772C.
+ */
+static int asix_ax88772a_read_status(struct phy_device *phydev)
+{
+	int ret, val;
+
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	if (!phydev->link)
+		return 0;
+
+	/* If MII_LPA is 0, phy_resolve_aneg_linkmode() will fail to resolve
+	 * linkmode so use MII_BMCR as default values.
+	 */
+	val = phy_read(phydev, MII_BMCR);
+	if (val < 0)
+		return val;
+
+	if (val & BMCR_SPEED100)
+		phydev->speed = SPEED_100;
+	else
+		phydev->speed = SPEED_10;
+
+	if (val & BMCR_FULLDPLX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	ret = genphy_read_lpa(phydev);
+	if (ret < 0)
+		return ret;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
+		phy_resolve_aneg_linkmode(phydev);
+
+	return 0;
+}
+
+static void asix_ax88772a_link_change_notify(struct phy_device *phydev)
+{
+	/* Reset PHY, otherwise MII_LPA will provide outdated information.
+	 * This issue is reproducible only with some link partner PHYs
+	 */
+	if (phydev->state == PHY_NOLINK && phydev->drv->soft_reset)
+		phydev->drv->soft_reset(phydev);
+}
+
+static struct phy_driver asix_driver[] = {
+{
+	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A),
+	.name		= "Asix Electronics AX88772A",
+	.flags		= PHY_IS_INTERNAL,
+	.read_status	= asix_ax88772a_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.soft_reset	= asix_soft_reset,
+	.link_change_notify	= asix_ax88772a_link_change_notify,
+}, {
+	PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C),
+	.name		= "Asix Electronics AX88772C",
+	.flags		= PHY_IS_INTERNAL,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.soft_reset	= asix_soft_reset,
+}, {
 	.phy_id		= PHY_ID_ASIX_AX88796B,
 	.name		= "Asix Electronics AX88796B",
 	.phy_id_mask	= 0xfffffff0,
@@ -50,6 +120,8 @@  static struct phy_driver asix_driver[] = { {
 module_phy_driver(asix_driver);
 
 static struct mdio_device_id __maybe_unused asix_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772A) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_ASIX_AX88772C) },
 	{ PHY_ID_ASIX_AX88796B, 0xfffffff0 },
 	{ }
 };
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 179308782888..6f7be47974f6 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -164,6 +164,7 @@  config USB_NET_AX8817X
 	depends on USB_USBNET
 	select CRC32
 	select PHYLIB
+	select AX88796B_PHY
 	default y
 	help
 	  This option adds support for ASIX AX88xxx based USB 2.0