diff mbox series

[2/2] USB: EHCI: Add alias for Broadcom INSNREG

Message ID 20210818043035.1308062-3-keescook@chromium.org (mailing list archive)
State Superseded
Headers show
Series USB: EHCI: Add register array bounds to HCS ports | expand

Commit Message

Kees Cook Aug. 18, 2021, 4:30 a.m. UTC
Refactor struct ehci_regs to avoid accessing beyond the end of
port_status. This change results in no difference in the resulting
object code.

Avoids several warnings when building with -Warray-bounds:

drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset':
drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds]
  113 |  ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
      |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/ehci.h:274,
                 from drivers/usb/host/ehci-brcm.c:15:
./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status'
  132 |   u32 port_status[HCS_N_PORTS_MAX];
      |       ^~~~~~~~~~~

Note that the documentation around this proprietary register is
confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset
would be 0x80 (not 0x90). The code uses port_status[0x10], so is that
not using "USB_EHCI_INSNREG00"?

Perhaps port_status[0x10] is USB_EHCI_INSNREG01 and port_status[0x12]
is USB_EHCI_INSNREG03? If so, the union could be adjusted to better
represent the layout.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Cooper <alcooperx@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 9df231511bd6 ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Signed-off-by: Kees Cook <keescook@chromium.org>
---
 drivers/usb/host/ehci-brcm.c | 11 +++++------
 include/linux/usb/ehci_def.h | 16 ++++++++++++++--
 2 files changed, 19 insertions(+), 8 deletions(-)

Comments

Alan Stern Aug. 18, 2021, 2:57 p.m. UTC | #1
On Tue, Aug 17, 2021 at 09:30:34PM -0700, Kees Cook wrote:
> Refactor struct ehci_regs to avoid accessing beyond the end of
> port_status. This change results in no difference in the resulting
> object code.
> 
> Avoids several warnings when building with -Warray-bounds:
> 
> drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset':
> drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds]
>   113 |  ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
>       |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> In file included from drivers/usb/host/ehci.h:274,
>                  from drivers/usb/host/ehci-brcm.c:15:
> ./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status'
>   132 |   u32 port_status[HCS_N_PORTS_MAX];
>       |       ^~~~~~~~~~~
> 
> Note that the documentation around this proprietary register is
> confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset
> would be 0x80 (not 0x90). The code uses port_status[0x10], so is that
> not using "USB_EHCI_INSNREG00"?

I suspect the 0x90 value in the comment is a typo for 0x80.

> Perhaps port_status[0x10] is USB_EHCI_INSNREG01 and port_status[0x12]
> is USB_EHCI_INSNREG03? If so, the union could be adjusted to better
> represent the layout.
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Al Cooper <alcooperx@gmail.com>
> Cc: Alan Stern <stern@rowland.harvard.edu>
> Cc: linux-usb@vger.kernel.org
> Cc: bcm-kernel-feedback-list@broadcom.com
> Suggested-by: Arnd Bergmann <arnd@arndb.de>
> Fixes: 9df231511bd6 ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
> Signed-off-by: Kees Cook <keescook@chromium.org>
> ---
>  drivers/usb/host/ehci-brcm.c | 11 +++++------
>  include/linux/usb/ehci_def.h | 16 ++++++++++++++--
>  2 files changed, 19 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
> index 3e0ebe8cc649..5d232d3701f9 100644
> --- a/drivers/usb/host/ehci-brcm.c
> +++ b/drivers/usb/host/ehci-brcm.c
> @@ -110,8 +110,8 @@ static int ehci_brcm_reset(struct usb_hcd *hcd)
>  	 *   bus usage
>  	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90

This last comment line is no longer necessary, thanks to the revised 
port definitions.  And since it is actively misleading, with the 0x90 
instead of 0x80, I think it should be removed entirely.

>  	 */
> -	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
> -	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
> +	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
> +	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
>  
>  	return ehci_setup(hcd);
>  }
> @@ -223,11 +223,10 @@ static int __maybe_unused ehci_brcm_resume(struct device *dev)
>  	/*
>  	 * SWLINUX-1705: Avoid OUT packet underflows during high memory
>  	 *   bus usage
> -	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00
> -	 * @ 0x90
> +	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90

Same here.

>  	 */
> -	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
> -	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
> +	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
> +	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
>  
>  	ehci_resume(hcd, false);
>  
> diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
> index 5398f571113b..86f0909cab99 100644
> --- a/include/linux/usb/ehci_def.h
> +++ b/include/linux/usb/ehci_def.h
> @@ -182,11 +182,23 @@ struct ehci_regs {
>   * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
>   * PORTSCx
>   */
> -	/* HOSTPC: offset 0x84 */
> -	u32		hostpc[HCS_N_PORTS_MAX];
> +	union {
> +		/* HOSTPC: offset 0x84 */
> +		u32	hostpc[HCS_N_PORTS_MAX];
>  #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
>  #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
>  
> +		/*
> +		 * This was originally documented as:
> +		 * "port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90"
> +		 * but this doesn't make sense: the code was using
> +		 * port_status[0x10]. port_status[0x0f] would be reserved4.
> +		 * Also, none of these are near 0x90. port_status[0x10] is
> +		 * offset 0x84, and port_status[0x0f] would be 0x80.
> +		 */

This comment is entirely inappropriate.  It's the sort of thing that 
belongs in the git history, not in the code.

> +		u32	brcm_insnreg[3];

Given the notation in the original comments, perhaps it would be better 
to define this as:

		struct {		/* Broadcom proprietary registers */
			u32	brcm_insnreg01;		/* offset 0x84 */
			u32	brcm_insnreg02;
			u32	brcm_insnreg03;
		};

I don't know.  It would be nice to hear from somebody at Broadcom.

Alan Stern

> +	};
> +
>  	u32		reserved5[2];
>  
>  	/* USBMODE_EX: offset 0xc8 */
> -- 
> 2.30.2
>
Kees Cook Aug. 18, 2021, 5:15 p.m. UTC | #2
On Wed, Aug 18, 2021 at 10:57:36AM -0400, Alan Stern wrote:
> On Tue, Aug 17, 2021 at 09:30:34PM -0700, Kees Cook wrote:
> > Refactor struct ehci_regs to avoid accessing beyond the end of
> > port_status. This change results in no difference in the resulting
> > object code.
> > 
> > Avoids several warnings when building with -Warray-bounds:
> > 
> > drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset':
> > drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds]
> >   113 |  ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
> >       |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > In file included from drivers/usb/host/ehci.h:274,
> >                  from drivers/usb/host/ehci-brcm.c:15:
> > ./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status'
> >   132 |   u32 port_status[HCS_N_PORTS_MAX];
> >       |       ^~~~~~~~~~~
> > 
> > Note that the documentation around this proprietary register is
> > confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset
> > would be 0x80 (not 0x90). The code uses port_status[0x10], so is that
> > not using "USB_EHCI_INSNREG00"?
> 
> I suspect the 0x90 value in the comment is a typo for 0x80.

That'd be my conclusion too. I've updated this for v2.

> 
> > Perhaps port_status[0x10] is USB_EHCI_INSNREG01 and port_status[0x12]
> > is USB_EHCI_INSNREG03? If so, the union could be adjusted to better
> > represent the layout.
> > 
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Al Cooper <alcooperx@gmail.com>
> > Cc: Alan Stern <stern@rowland.harvard.edu>
> > Cc: linux-usb@vger.kernel.org
> > Cc: bcm-kernel-feedback-list@broadcom.com
> > Suggested-by: Arnd Bergmann <arnd@arndb.de>
> > Fixes: 9df231511bd6 ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
> > Signed-off-by: Kees Cook <keescook@chromium.org>
> > ---
> >  drivers/usb/host/ehci-brcm.c | 11 +++++------
> >  include/linux/usb/ehci_def.h | 16 ++++++++++++++--
> >  2 files changed, 19 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
> > index 3e0ebe8cc649..5d232d3701f9 100644
> > --- a/drivers/usb/host/ehci-brcm.c
> > +++ b/drivers/usb/host/ehci-brcm.c
> > @@ -110,8 +110,8 @@ static int ehci_brcm_reset(struct usb_hcd *hcd)
> >  	 *   bus usage
> >  	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90
> 
> This last comment line is no longer necessary, thanks to the revised 
> port definitions.  And since it is actively misleading, with the 0x90 
> instead of 0x80, I think it should be removed entirely.

Done.

> 
> >  	 */
> > -	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
> > -	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
> > +	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
> > +	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
> >  
> >  	return ehci_setup(hcd);
> >  }
> > @@ -223,11 +223,10 @@ static int __maybe_unused ehci_brcm_resume(struct device *dev)
> >  	/*
> >  	 * SWLINUX-1705: Avoid OUT packet underflows during high memory
> >  	 *   bus usage
> > -	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00
> > -	 * @ 0x90
> > +	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90
> 
> Same here.
> 
> >  	 */
> > -	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
> > -	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
> > +	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
> > +	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
> >  
> >  	ehci_resume(hcd, false);
> >  
> > diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
> > index 5398f571113b..86f0909cab99 100644
> > --- a/include/linux/usb/ehci_def.h
> > +++ b/include/linux/usb/ehci_def.h
> > @@ -182,11 +182,23 @@ struct ehci_regs {
> >   * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
> >   * PORTSCx
> >   */
> > -	/* HOSTPC: offset 0x84 */
> > -	u32		hostpc[HCS_N_PORTS_MAX];
> > +	union {
> > +		/* HOSTPC: offset 0x84 */
> > +		u32	hostpc[HCS_N_PORTS_MAX];
> >  #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
> >  #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
> >  
> > +		/*
> > +		 * This was originally documented as:
> > +		 * "port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90"
> > +		 * but this doesn't make sense: the code was using
> > +		 * port_status[0x10]. port_status[0x0f] would be reserved4.
> > +		 * Also, none of these are near 0x90. port_status[0x10] is
> > +		 * offset 0x84, and port_status[0x0f] would be 0x80.
> > +		 */
> 
> This comment is entirely inappropriate.  It's the sort of thing that 
> belongs in the git history, not in the code.

I wanted it to be easily discoverable, but since we've got a preferred
result now, I'm dropping this and orienting against 0x80.

> 
> > +		u32	brcm_insnreg[3];
> 
> Given the notation in the original comments, perhaps it would be better 
> to define this as:
> 
> 		struct {		/* Broadcom proprietary registers */
> 			u32	brcm_insnreg01;		/* offset 0x84 */
> 			u32	brcm_insnreg02;
> 			u32	brcm_insnreg03;
> 		};

Following the other register arrays, I'm going to keep an array for
this, but adjust the numbering to start at 0 @ 0x80 so the code will
poke offset 1 and 3.

> I don't know.  It would be nice to hear from somebody at Broadcom.

Agreed. :)

Thanks for the review!
diff mbox series

Patch

diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
index 3e0ebe8cc649..5d232d3701f9 100644
--- a/drivers/usb/host/ehci-brcm.c
+++ b/drivers/usb/host/ehci-brcm.c
@@ -110,8 +110,8 @@  static int ehci_brcm_reset(struct usb_hcd *hcd)
 	 *   bus usage
 	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90
 	 */
-	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
-	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
+	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
+	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
 
 	return ehci_setup(hcd);
 }
@@ -223,11 +223,10 @@  static int __maybe_unused ehci_brcm_resume(struct device *dev)
 	/*
 	 * SWLINUX-1705: Avoid OUT packet underflows during high memory
 	 *   bus usage
-	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00
-	 * @ 0x90
+	 * port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90
 	 */
-	ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
-	ehci_writel(ehci, 0x00000001, &ehci->regs->port_status[0x12]);
+	ehci_writel(ehci, 0x00800040, &ehci->regs->brcm_insnreg[0]);
+	ehci_writel(ehci, 0x00000001, &ehci->regs->brcm_insnreg[2]);
 
 	ehci_resume(hcd, false);
 
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 5398f571113b..86f0909cab99 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -182,11 +182,23 @@  struct ehci_regs {
  * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
  * PORTSCx
  */
-	/* HOSTPC: offset 0x84 */
-	u32		hostpc[HCS_N_PORTS_MAX];
+	union {
+		/* HOSTPC: offset 0x84 */
+		u32	hostpc[HCS_N_PORTS_MAX];
 #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
 #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
 
+		/*
+		 * This was originally documented as:
+		 * "port_status[0x0f] = Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x90"
+		 * but this doesn't make sense: the code was using
+		 * port_status[0x10]. port_status[0x0f] would be reserved4.
+		 * Also, none of these are near 0x90. port_status[0x10] is
+		 * offset 0x84, and port_status[0x0f] would be 0x80.
+		 */
+		u32	brcm_insnreg[3];
+	};
+
 	u32		reserved5[2];
 
 	/* USBMODE_EX: offset 0xc8 */