diff mbox series

drm/udl: fix control-message timeout

Message ID 20211025115353.5089-1-johan@kernel.org (mailing list archive)
State Accepted
Commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93
Headers show
Series drm/udl: fix control-message timeout | expand

Commit Message

Johan Hovold Oct. 25, 2021, 11:53 a.m. UTC
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: stable@vger.kernel.org      # 3.4
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/gpu/drm/udl/udl_connector.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Daniel Vetter Nov. 5, 2021, 10:15 a.m. UTC | #1
On Mon, Oct 25, 2021 at 01:53:53PM +0200, Johan Hovold wrote:
> USB control-message timeouts are specified in milliseconds and should
> specifically not vary with CONFIG_HZ.
> 
> Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
> Cc: stable@vger.kernel.org      # 3.4
> Signed-off-by: Johan Hovold <johan@kernel.org>

Thanks for patch, queued up for the merge window.
-Daniel

> ---
>  drivers/gpu/drm/udl/udl_connector.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c
> index 3750fd216131..930574ad2bca 100644
> --- a/drivers/gpu/drm/udl/udl_connector.c
> +++ b/drivers/gpu/drm/udl/udl_connector.c
> @@ -30,7 +30,7 @@ static int udl_get_edid_block(void *data, u8 *buf, unsigned int block,
>  		int bval = (i + block * EDID_LENGTH) << 8;
>  		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
>  				      0x02, (0x80 | (0x02 << 5)), bval,
> -				      0xA1, read_buff, 2, HZ);
> +				      0xA1, read_buff, 2, 1000);
>  		if (ret < 1) {
>  			DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
>  			kfree(read_buff);
> -- 
> 2.32.0
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/udl/udl_connector.c b/drivers/gpu/drm/udl/udl_connector.c
index 3750fd216131..930574ad2bca 100644
--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -30,7 +30,7 @@  static int udl_get_edid_block(void *data, u8 *buf, unsigned int block,
 		int bval = (i + block * EDID_LENGTH) << 8;
 		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				      0x02, (0x80 | (0x02 << 5)), bval,
-				      0xA1, read_buff, 2, HZ);
+				      0xA1, read_buff, 2, 1000);
 		if (ret < 1) {
 			DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
 			kfree(read_buff);