diff mbox series

[1/4] dt-bindings: usb: chipidea: Convert to json-schema

Message ID 20211209165339.614498-1-thierry.reding@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/4] dt-bindings: usb: chipidea: Convert to json-schema | expand

Commit Message

Thierry Reding Dec. 9, 2021, 4:53 p.m. UTC
From: Thierry Reding <treding@nvidia.com>

Convert the ChipIdea USB2 bindings from the free-form text format to
json-schema.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 .../bindings/usb/chipidea,usb2.yaml           | 310 ++++++++++++++++++
 .../devicetree/bindings/usb/ci-hdrc-usb2.txt  | 158 ---------
 2 files changed, 310 insertions(+), 158 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
 delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt

Comments

Rob Herring (Arm) Dec. 9, 2021, 8:55 p.m. UTC | #1
On Thu, 09 Dec 2021 17:53:36 +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Convert the ChipIdea USB2 bindings from the free-form text format to
> json-schema.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  .../bindings/usb/chipidea,usb2.yaml           | 310 ++++++++++++++++++
>  .../devicetree/bindings/usb/ci-hdrc-usb2.txt  | 158 ---------
>  2 files changed, 310 insertions(+), 158 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
>  delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1565842


usb@10024000: clock-names: ['ipg', 'ahb', 'per'] is not of type 'object'
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024000: clocks: [[1, 75], [1, 62], [1, 15]] is too long
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024000: clocks: Additional items are not allowed ([1, 62], [1, 15] were unexpected)
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024200: clock-names: ['ipg', 'ahb', 'per'] is not of type 'object'
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024200: clocks: [[1, 75], [1, 62], [1, 15]] is too long
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024200: clocks: Additional items are not allowed ([1, 62], [1, 15] were unexpected)
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024400: clock-names: ['ipg', 'ahb', 'per'] is not of type 'object'
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024400: clocks: [[1, 75], [1, 62], [1, 15]] is too long
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@10024400: clocks: Additional items are not allowed ([1, 62], [1, 15] were unexpected)
	arch/arm/boot/dts/imx27-apf27dev.dt.yaml
	arch/arm/boot/dts/imx27-apf27.dt.yaml
	arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dt.yaml
	arch/arm/boot/dts/imx27-pdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dt.yaml
	arch/arm/boot/dts/imx27-phytec-phycore-rdk.dt.yaml

usb@12500000: clock-names: ['core', 'iface'] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: clocks: [[12, 128], [12, 126]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: clocks: Additional items are not allowed ([12, 126] was unexpected)
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: reg: [[307232768, 512], [307233280, 512]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: #reset-cells: [[1]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: reset-names:0: 'usb' was expected
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: ulpi: 'compatible' is a required property
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12500000: ulpi: 'reg' is a required property
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: clock-names: ['core', 'iface'] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: clocks: [[12, 297], [12, 295]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: clocks: Additional items are not allowed ([12, 295] was unexpected)
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: reg: [[307363840, 512], [307364352, 512]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: #reset-cells: [[1]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: reset-names:0: 'usb' was expected
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12520000: ulpi: 'compatible' is a required property
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml

usb@12520000: ulpi: 'reg' is a required property
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml

usb@12530000: clock-names: ['core', 'iface'] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: clocks: [[12, 300], [12, 298]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: clocks: Additional items are not allowed ([12, 298] was unexpected)
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: reg: [[307429376, 512], [307429888, 512]] is too long
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: #reset-cells: [[1]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: reset-names:0: 'usb' was expected
	arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

usb@12530000: ulpi: 'compatible' is a required property
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml

usb@12530000: ulpi: 'reg' is a required property
	arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
	arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml

usb@2184000: adp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx6dl-yapp4-draco.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-hydra.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-orion.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-ursa.dt.yaml
	arch/arm/boot/dts/imx6q-pistachio.dt.yaml
	arch/arm/boot/dts/imx6q-var-dt6customboard.dt.yaml
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml

usb@2184000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx6sl-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6sl-warp.dt.yaml
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml
	arch/arm/boot/dts/imx6sx-sabreauto.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-mqs.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-sai.dt.yaml
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-basic.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-extended.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-full.dt.yaml
	arch/arm/boot/dts/imx6ul-14x14-evk.dt.yaml
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dt.yaml
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dt.yaml
	arch/arm/boot/dts/imx6ul-geam.dt.yaml
	arch/arm/boot/dts/imx6ul-isiot-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-isiot-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-14x14-evk.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ul-liteboard.dt.yaml
	arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dt.yaml
	arch/arm/boot/dts/imx6ull-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-pi.dt.yaml
	arch/arm/boot/dts/imx6ul-prti6g.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0010.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0011.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dt.yaml
	arch/arm/boot/dts/imx6ulz-14x14-evk.dt.yaml

usb@2184000: fsl,anatop: [[15]] is not of type 'object'
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml

usb@2184000: fsl,anatop: [[16]] is not of type 'object'
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6ul-liteboard.dt.yaml

usb@2184000: fsl,anatop: [[17]] is not of type 'object'
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dt.yaml

usb@2184000: fsl,anatop: [[18]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-isiot-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-isiot-nand.dt.yaml
	arch/arm/boot/dts/imx6ulz-14x14-evk.dt.yaml

usb@2184000: fsl,anatop: [[20]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-udoo-neo-basic.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-extended.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-full.dt.yaml

usb@2184000: fsl,anatop: [[21]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-prti6g.dt.yaml

usb@2184000: fsl,anatop: [[23]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dt.yaml

usb@2184000: fsl,anatop: [[24]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-pi.dt.yaml

usb@2184000: fsl,anatop: [[25]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-geam.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dt.yaml

usb@2184000: fsl,anatop: [[26]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sabreauto.dt.yaml

usb@2184000: fsl,anatop: [[27]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
	arch/arm/boot/dts/imx6ul-14x14-evk.dt.yaml
	arch/arm/boot/dts/imx6ull-14x14-evk.dt.yaml

usb@2184000: fsl,anatop: [[28]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sdb.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-sai.dt.yaml

usb@2184000: fsl,anatop: [[29]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sdb-mqs.dt.yaml

usb@2184000: fsl,anatop: [[30]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0010.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0011.dt.yaml

usb@2184000: fsl,anatop: [[33]] is not of type 'object'
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml

usb@2184000: fsl,anatop: [[35]] is not of type 'object'
	arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dt.yaml

usb@2184000: hnp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx6dl-yapp4-draco.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-hydra.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-orion.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-ursa.dt.yaml
	arch/arm/boot/dts/imx6q-pistachio.dt.yaml
	arch/arm/boot/dts/imx6q-var-dt6customboard.dt.yaml
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml

usb@2184000: srp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx6dl-yapp4-draco.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-hydra.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-orion.dt.yaml
	arch/arm/boot/dts/imx6dl-yapp4-ursa.dt.yaml
	arch/arm/boot/dts/imx6q-pistachio.dt.yaml
	arch/arm/boot/dts/imx6q-var-dt6customboard.dt.yaml
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml

usb@2184200: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx6sl-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-evk.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-clarahd.dt.yaml
	arch/arm/boot/dts/imx6sll-kobo-librah2o.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6sl-warp.dt.yaml
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml
	arch/arm/boot/dts/imx6sx-sabreauto.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-mqs.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-sai.dt.yaml
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-basic.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-extended.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-full.dt.yaml
	arch/arm/boot/dts/imx6ul-14x14-evk.dt.yaml
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dt.yaml
	arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dt.yaml
	arch/arm/boot/dts/imx6ul-geam.dt.yaml
	arch/arm/boot/dts/imx6ul-isiot-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-isiot-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dt.yaml
	arch/arm/boot/dts/imx6ul-kontron-n6310-s.dt.yaml
	arch/arm/boot/dts/imx6ull-14x14-evk.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dt.yaml
	arch/arm/boot/dts/imx6ul-liteboard.dt.yaml
	arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dt.yaml
	arch/arm/boot/dts/imx6ull-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-opos6uldev.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-emmc.dt.yaml
	arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx6ul-pico-pi.dt.yaml
	arch/arm/boot/dts/imx6ul-prti6g.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0010.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-0011.dt.yaml
	arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dt.yaml
	arch/arm/boot/dts/imx6ulz-14x14-evk.dt.yaml

usb@2184200: reset-gpios: [[21, 11, 0]] is not of type 'object'
	arch/arm/boot/dts/imx6q-dms-ba16.dt.yaml

usb@2184200: reset-gpios: [[22, 11, 0]] is not of type 'object'
	arch/arm/boot/dts/imx6q-b450v3.dt.yaml
	arch/arm/boot/dts/imx6q-b650v3.dt.yaml
	arch/arm/boot/dts/imx6q-b850v3.dt.yaml

usb@2184200: reset-gpios: [[39, 26, 1]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml

usb@2184400: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx6sl-evk.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine2hd.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-shine3.dt.yaml
	arch/arm/boot/dts/imx6sl-tolino-vision5.dt.yaml
	arch/arm/boot/dts/imx6sl-warp.dt.yaml
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml
	arch/arm/boot/dts/imx6sx-sabreauto.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-mqs.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-sai.dt.yaml
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-basic.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-extended.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-full.dt.yaml

usb@2184400: fsl,anatop: [[20]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-udoo-neo-basic.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-extended.dt.yaml
	arch/arm/boot/dts/imx6sx-udoo-neo-full.dt.yaml

usb@2184400: fsl,anatop: [[26]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sabreauto.dt.yaml

usb@2184400: fsl,anatop: [[27]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-nitrogen6sx.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx6sx-softing-vining-2000.dt.yaml

usb@2184400: fsl,anatop: [[28]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sdb.dt.yaml
	arch/arm/boot/dts/imx6sx-sdb-sai.dt.yaml

usb@2184400: fsl,anatop: [[29]] is not of type 'object'
	arch/arm/boot/dts/imx6sx-sdb-mqs.dt.yaml

usb@30b10000: adp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7s-mba7.dt.yaml

usb@30b10000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-meerkat96.dt.yaml
	arch/arm/boot/dts/imx7d-nitrogen7.dt.yaml
	arch/arm/boot/dts/imx7d-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx7d-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx7d-pico-nymph.dt.yaml
	arch/arm/boot/dts/imx7d-pico-pi.dt.yaml
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml
	arch/arm/boot/dts/imx7d-sbc-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-sdb.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-sht11.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rmu2.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rpu2.dt.yaml
	arch/arm/boot/dts/imx7s-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7s-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7s-mba7.dt.yaml
	arch/arm/boot/dts/imx7s-warp.dt.yaml

usb@30b10000: hnp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7s-mba7.dt.yaml

usb@30b10000: srp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7s-mba7.dt.yaml

usb@30b20000: adp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml

usb@30b20000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-meerkat96.dt.yaml
	arch/arm/boot/dts/imx7d-nitrogen7.dt.yaml
	arch/arm/boot/dts/imx7d-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx7d-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx7d-pico-nymph.dt.yaml
	arch/arm/boot/dts/imx7d-pico-pi.dt.yaml
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml
	arch/arm/boot/dts/imx7d-sbc-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-sdb.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-sht11.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rmu2.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rpu2.dt.yaml

usb@30b20000: hnp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml

usb@30b20000: srp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml

usb@30b30000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-meerkat96.dt.yaml
	arch/arm/boot/dts/imx7d-nitrogen7.dt.yaml
	arch/arm/boot/dts/imx7d-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx7d-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx7d-pico-nymph.dt.yaml
	arch/arm/boot/dts/imx7d-pico-pi.dt.yaml
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml
	arch/arm/boot/dts/imx7d-sbc-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-sdb.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-sht11.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rmu2.dt.yaml
	arch/arm/boot/dts/imx7d-zii-rpu2.dt.yaml
	arch/arm/boot/dts/imx7s-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7s-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7s-mba7.dt.yaml
	arch/arm/boot/dts/imx7s-warp.dt.yaml

usb@30b30000: power-domains: [[44]] is not of type 'object'
	arch/arm/boot/dts/imx7d-remarkable2.dt.yaml

usb@30b30000: power-domains: [[46]] is not of type 'object'
	arch/arm/boot/dts/imx7d-cl-som-imx7.dt.yaml
	arch/arm/boot/dts/imx7d-sbc-imx7.dt.yaml

usb@30b30000: power-domains: [[47]] is not of type 'object'
	arch/arm/boot/dts/imx7d-zii-rmu2.dt.yaml

usb@30b30000: power-domains: [[52]] is not of type 'object'
	arch/arm/boot/dts/imx7d-flex-concentrator.dt.yaml
	arch/arm/boot/dts/imx7d-flex-concentrator-mfg.dt.yaml

usb@30b30000: power-domains: [[54]] is not of type 'object'
	arch/arm/boot/dts/imx7d-meerkat96.dt.yaml

usb@30b30000: power-domains: [[57]] is not of type 'object'
	arch/arm/boot/dts/imx7s-warp.dt.yaml

usb@30b30000: power-domains: [[63]] is not of type 'object'
	arch/arm/boot/dts/imx7d-pico-nymph.dt.yaml

usb@30b30000: power-domains: [[64]] is not of type 'object'
	arch/arm/boot/dts/imx7s-mba7.dt.yaml

usb@30b30000: power-domains: [[65]] is not of type 'object'
	arch/arm/boot/dts/imx7d-pico-dwarf.dt.yaml
	arch/arm/boot/dts/imx7d-pico-hobbit.dt.yaml
	arch/arm/boot/dts/imx7d-pico-pi.dt.yaml
	arch/arm/boot/dts/imx7d-sdb.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-reva.dt.yaml
	arch/arm/boot/dts/imx7d-sdb-sht11.dt.yaml

usb@30b30000: power-domains: [[66]] is not of type 'object'
	arch/arm/boot/dts/imx7d-mba7.dt.yaml
	arch/arm/boot/dts/imx7d-nitrogen7.dt.yaml

usb@30b30000: power-domains: [[74]] is not of type 'object'
	arch/arm/boot/dts/imx7d-zii-rpu2.dt.yaml

usb@30b30000: power-domains: [[78]] is not of type 'object'
	arch/arm/boot/dts/imx7s-colibri-aster.dt.yaml

usb@30b30000: power-domains: [[80]] is not of type 'object'
	arch/arm/boot/dts/imx7d-colibri-aster.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-emmc-aster.dt.yaml

usb@30b30000: power-domains: [[82]] is not of type 'object'
	arch/arm/boot/dts/imx7s-colibri-eval-v3.dt.yaml

usb@30b30000: power-domains: [[84]] is not of type 'object'
	arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dt.yaml
	arch/arm/boot/dts/imx7d-colibri-eval-v3.dt.yaml

usb@32e40000: adp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml

usb@32e40000: clock-names: ['usb1_ctrl_root_clk'] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dt.yaml

usb@32e40000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dt.yaml

usb@32e40000: hnp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml

usb@32e40000: port: 'compatible' is a required property
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml

usb@32e40000: port: 'reg' is a required property
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml

usb@32e40000: power-domains: [[47]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml

usb@32e40000: power-domains: [[53]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml

usb@32e40000: power-domains: [[54]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml

usb@32e40000: power-domains: [[57]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml

usb@32e40000: power-domains: [[61]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml

usb@32e40000: power-domains: [[64]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml

usb@32e40000: power-domains: [[65]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml

usb@32e40000: power-domains: [[66]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml

usb@32e40000: power-domains: [[67]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml

usb@32e40000: power-domains: [[68]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml

usb@32e40000: power-domains: [[71]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml

usb@32e40000: srp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml

usb@32e40000: usb-role-switch: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dt.yaml

usb@32e50000: adp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml

usb@32e50000: clock-names: ['usb1_ctrl_root_clk'] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml

usb@32e50000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml

usb@32e50000: hnp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml

usb@32e50000: power-domains: [[50]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dt.yaml

usb@32e50000: power-domains: [[57]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dt.yaml

usb@32e50000: power-domains: [[58]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dt.yaml

usb@32e50000: power-domains: [[61]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml

usb@32e50000: power-domains: [[65]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dt.yaml

usb@32e50000: power-domains: [[67]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml

usb@32e50000: power-domains: [[69]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dt.yaml

usb@32e50000: power-domains: [[70]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dt.yaml

usb@32e50000: power-domains: [[71]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dt.yaml

usb@32e50000: power-domains: [[75]] is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dt.yaml

usb@32e50000: srp-disable: True is not of type 'object'
	arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dt.yaml

usb@40034000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/vf500-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/vf610-bk4.dt.yaml
	arch/arm/boot/dts/vf610-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/vf610-cosmic.dt.yaml
	arch/arm/boot/dts/vf610m4-colibri.dt.yaml
	arch/arm/boot/dts/vf610m4-cosmic.dt.yaml
	arch/arm/boot/dts/vf610-twr.dt.yaml
	arch/arm/boot/dts/vf610-zii-cfu1.dt.yaml
	arch/arm/boot/dts/vf610-zii-dev-rev-b.dt.yaml
	arch/arm/boot/dts/vf610-zii-dev-rev-c.dt.yaml
	arch/arm/boot/dts/vf610-zii-scu4-aib.dt.yaml
	arch/arm/boot/dts/vf610-zii-spb4.dt.yaml
	arch/arm/boot/dts/vf610-zii-ssmb-dtu.dt.yaml
	arch/arm/boot/dts/vf610-zii-ssmb-spu3.dt.yaml

usb@400b4000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/vf500-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/vf610-bk4.dt.yaml
	arch/arm/boot/dts/vf610-colibri-eval-v3.dt.yaml
	arch/arm/boot/dts/vf610-cosmic.dt.yaml
	arch/arm/boot/dts/vf610m4-colibri.dt.yaml
	arch/arm/boot/dts/vf610m4-cosmic.dt.yaml
	arch/arm/boot/dts/vf610-twr.dt.yaml
	arch/arm/boot/dts/vf610-zii-cfu1.dt.yaml
	arch/arm/boot/dts/vf610-zii-dev-rev-b.dt.yaml
	arch/arm/boot/dts/vf610-zii-dev-rev-c.dt.yaml
	arch/arm/boot/dts/vf610-zii-scu4-aib.dt.yaml
	arch/arm/boot/dts/vf610-zii-spb4.dt.yaml
	arch/arm/boot/dts/vf610-zii-ssmb-dtu.dt.yaml
	arch/arm/boot/dts/vf610-zii-ssmb-spu3.dt.yaml

usb@40330000: adp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7ulp-com.dt.yaml
	arch/arm/boot/dts/imx7ulp-evk.dt.yaml

usb@40330000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx7ulp-com.dt.yaml
	arch/arm/boot/dts/imx7ulp-evk.dt.yaml

usb@40330000: hnp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7ulp-com.dt.yaml
	arch/arm/boot/dts/imx7ulp-evk.dt.yaml

usb@40330000: srp-disable: True is not of type 'object'
	arch/arm/boot/dts/imx7ulp-com.dt.yaml
	arch/arm/boot/dts/imx7ulp-evk.dt.yaml

usb@53f80000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx50-evk.dt.yaml
	arch/arm/boot/dts/imx50-kobo-aura.dt.yaml
	arch/arm/boot/dts/imx53-ard.dt.yaml
	arch/arm/boot/dts/imx53-cx9020.dt.yaml
	arch/arm/boot/dts/imx53-kp-ddc.dt.yaml
	arch/arm/boot/dts/imx53-kp-hsc.dt.yaml
	arch/arm/boot/dts/imx53-m53evk.dt.yaml
	arch/arm/boot/dts/imx53-m53menlo.dt.yaml
	arch/arm/boot/dts/imx53-mba53.dt.yaml
	arch/arm/boot/dts/imx53-ppd.dt.yaml
	arch/arm/boot/dts/imx53-qsb.dt.yaml
	arch/arm/boot/dts/imx53-qsrb.dt.yaml
	arch/arm/boot/dts/imx53-smd.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x03x.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x13x.dt.yaml
	arch/arm/boot/dts/imx53-usbarmory.dt.yaml
	arch/arm/boot/dts/imx53-voipac-bsb.dt.yaml

usb@53f80200: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx50-evk.dt.yaml
	arch/arm/boot/dts/imx50-kobo-aura.dt.yaml
	arch/arm/boot/dts/imx53-ard.dt.yaml
	arch/arm/boot/dts/imx53-cx9020.dt.yaml
	arch/arm/boot/dts/imx53-kp-ddc.dt.yaml
	arch/arm/boot/dts/imx53-kp-hsc.dt.yaml
	arch/arm/boot/dts/imx53-m53evk.dt.yaml
	arch/arm/boot/dts/imx53-m53menlo.dt.yaml
	arch/arm/boot/dts/imx53-mba53.dt.yaml
	arch/arm/boot/dts/imx53-ppd.dt.yaml
	arch/arm/boot/dts/imx53-qsb.dt.yaml
	arch/arm/boot/dts/imx53-qsrb.dt.yaml
	arch/arm/boot/dts/imx53-smd.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x03x.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x13x.dt.yaml
	arch/arm/boot/dts/imx53-usbarmory.dt.yaml
	arch/arm/boot/dts/imx53-voipac-bsb.dt.yaml

usb@53f80400: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx53-ard.dt.yaml
	arch/arm/boot/dts/imx53-cx9020.dt.yaml
	arch/arm/boot/dts/imx53-kp-ddc.dt.yaml
	arch/arm/boot/dts/imx53-kp-hsc.dt.yaml
	arch/arm/boot/dts/imx53-m53evk.dt.yaml
	arch/arm/boot/dts/imx53-m53menlo.dt.yaml
	arch/arm/boot/dts/imx53-mba53.dt.yaml
	arch/arm/boot/dts/imx53-ppd.dt.yaml
	arch/arm/boot/dts/imx53-qsb.dt.yaml
	arch/arm/boot/dts/imx53-qsrb.dt.yaml
	arch/arm/boot/dts/imx53-smd.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x03x.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x13x.dt.yaml
	arch/arm/boot/dts/imx53-usbarmory.dt.yaml
	arch/arm/boot/dts/imx53-voipac-bsb.dt.yaml

usb@53f80600: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx53-ard.dt.yaml
	arch/arm/boot/dts/imx53-cx9020.dt.yaml
	arch/arm/boot/dts/imx53-kp-ddc.dt.yaml
	arch/arm/boot/dts/imx53-kp-hsc.dt.yaml
	arch/arm/boot/dts/imx53-m53evk.dt.yaml
	arch/arm/boot/dts/imx53-m53menlo.dt.yaml
	arch/arm/boot/dts/imx53-mba53.dt.yaml
	arch/arm/boot/dts/imx53-ppd.dt.yaml
	arch/arm/boot/dts/imx53-qsb.dt.yaml
	arch/arm/boot/dts/imx53-qsrb.dt.yaml
	arch/arm/boot/dts/imx53-smd.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x03x.dt.yaml
	arch/arm/boot/dts/imx53-tx53-x13x.dt.yaml
	arch/arm/boot/dts/imx53-usbarmory.dt.yaml
	arch/arm/boot/dts/imx53-voipac-bsb.dt.yaml

usb@53ff4000: clock-names: ['ipg', 'ahb', 'per'] is not of type 'object'
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4000: clocks: [[2, 9], [2, 70], [2, 8]] is too long
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml

usb@53ff4000: clocks: [[2, 9], [2, 73], [2, 28]] is too long
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4000: clocks: Additional items are not allowed ([2, 70], [2, 8] were unexpected)
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml

usb@53ff4000: clocks: Additional items are not allowed ([2, 73], [2, 28] were unexpected)
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4400: clock-names: ['ipg', 'ahb', 'per'] is not of type 'object'
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4400: clocks: [[2, 9], [2, 70], [2, 8]] is too long
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml

usb@53ff4400: clocks: [[2, 9], [2, 73], [2, 28]] is too long
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4400: clocks: Additional items are not allowed ([2, 70], [2, 8] were unexpected)
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml

usb@53ff4400: clocks: Additional items are not allowed ([2, 73], [2, 28] were unexpected)
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@53ff4400: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dt.yaml
	arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dt.yaml
	arch/arm/boot/dts/imx25-karo-tx25.dt.yaml
	arch/arm/boot/dts/imx25-pdk.dt.yaml
	arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dt.yaml
	arch/arm/boot/dts/imx35-pdk.dt.yaml

usb@73f80000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx51-apf51dev.dt.yaml
	arch/arm/boot/dts/imx51-apf51.dt.yaml
	arch/arm/boot/dts/imx51-babbage.dt.yaml
	arch/arm/boot/dts/imx51-digi-connectcore-jsk.dt.yaml
	arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dt.yaml
	arch/arm/boot/dts/imx51-ts4800.dt.yaml
	arch/arm/boot/dts/imx51-zii-rdu1.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu2-mezz.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu3-esb.dt.yaml

usb@73f80200: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx51-apf51dev.dt.yaml
	arch/arm/boot/dts/imx51-apf51.dt.yaml
	arch/arm/boot/dts/imx51-babbage.dt.yaml
	arch/arm/boot/dts/imx51-digi-connectcore-jsk.dt.yaml
	arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dt.yaml
	arch/arm/boot/dts/imx51-ts4800.dt.yaml
	arch/arm/boot/dts/imx51-zii-rdu1.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu2-mezz.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu3-esb.dt.yaml

usb@73f80400: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx51-apf51dev.dt.yaml
	arch/arm/boot/dts/imx51-apf51.dt.yaml
	arch/arm/boot/dts/imx51-babbage.dt.yaml
	arch/arm/boot/dts/imx51-digi-connectcore-jsk.dt.yaml
	arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dt.yaml
	arch/arm/boot/dts/imx51-ts4800.dt.yaml
	arch/arm/boot/dts/imx51-zii-rdu1.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu2-mezz.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu3-esb.dt.yaml

usb@73f80600: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx51-apf51dev.dt.yaml
	arch/arm/boot/dts/imx51-apf51.dt.yaml
	arch/arm/boot/dts/imx51-babbage.dt.yaml
	arch/arm/boot/dts/imx51-digi-connectcore-jsk.dt.yaml
	arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dt.yaml
	arch/arm/boot/dts/imx51-ts4800.dt.yaml
	arch/arm/boot/dts/imx51-zii-rdu1.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu2-mezz.dt.yaml
	arch/arm/boot/dts/imx51-zii-scu3-esb.dt.yaml

usb@78d9000: adp-disable: True is not of type 'object'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: clock-names: ['iface', 'core'] is not of type 'object'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: clocks: [[19, 133], [19, 134]] is too long
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: clocks: Additional items are not allowed ([19, 134] was unexpected)
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: hnp-disable: True is not of type 'object'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: interrupts: [[0, 134, 4], [0, 140, 4]] is too long
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: reg: [[126717952, 512], [126718464, 512]] is too long
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: #reset-cells: [[1]] is not of type 'object'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: reset-names:0: 'usb' was expected
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: srp-disable: True is not of type 'object'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: ulpi: 'compatible' is a required property
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@78d9000: ulpi: 'reg' is a required property
	arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dt.yaml
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dt.yaml
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dt.yaml

usb@80080000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx23-evk.dt.yaml
	arch/arm/boot/dts/imx23-olinuxino.dt.yaml
	arch/arm/boot/dts/imx23-sansa.dt.yaml
	arch/arm/boot/dts/imx23-stmp378x_devb.dt.yaml
	arch/arm/boot/dts/imx23-xfi3.dt.yaml
	arch/arm/boot/dts/imx28-apf28dev.dt.yaml
	arch/arm/boot/dts/imx28-apf28.dt.yaml
	arch/arm/boot/dts/imx28-apx4devkit.dt.yaml
	arch/arm/boot/dts/imx28-cfa10036.dt.yaml
	arch/arm/boot/dts/imx28-cfa10037.dt.yaml
	arch/arm/boot/dts/imx28-cfa10049.dt.yaml
	arch/arm/boot/dts/imx28-cfa10055.dt.yaml
	arch/arm/boot/dts/imx28-cfa10056.dt.yaml
	arch/arm/boot/dts/imx28-cfa10057.dt.yaml
	arch/arm/boot/dts/imx28-cfa10058.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-485.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-enocean.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-spi.dt.yaml
	arch/arm/boot/dts/imx28-duckbill.dt.yaml
	arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dt.yaml
	arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dt.yaml
	arch/arm/boot/dts/imx28-evk.dt.yaml
	arch/arm/boot/dts/imx28-m28cu3.dt.yaml
	arch/arm/boot/dts/imx28-m28evk.dt.yaml
	arch/arm/boot/dts/imx28-sps1.dt.yaml
	arch/arm/boot/dts/imx28-ts4600.dt.yaml
	arch/arm/boot/dts/imx28-tx28.dt.yaml
	arch/arm/boot/dts/imx28-xea.dt.yaml

usb@80090000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/imx28-apf28dev.dt.yaml
	arch/arm/boot/dts/imx28-apf28.dt.yaml
	arch/arm/boot/dts/imx28-apx4devkit.dt.yaml
	arch/arm/boot/dts/imx28-cfa10036.dt.yaml
	arch/arm/boot/dts/imx28-cfa10037.dt.yaml
	arch/arm/boot/dts/imx28-cfa10049.dt.yaml
	arch/arm/boot/dts/imx28-cfa10055.dt.yaml
	arch/arm/boot/dts/imx28-cfa10056.dt.yaml
	arch/arm/boot/dts/imx28-cfa10057.dt.yaml
	arch/arm/boot/dts/imx28-cfa10058.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-485.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-enocean.dt.yaml
	arch/arm/boot/dts/imx28-duckbill-2-spi.dt.yaml
	arch/arm/boot/dts/imx28-duckbill.dt.yaml
	arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dt.yaml
	arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dt.yaml
	arch/arm/boot/dts/imx28-evk.dt.yaml
	arch/arm/boot/dts/imx28-m28cu3.dt.yaml
	arch/arm/boot/dts/imx28-m28evk.dt.yaml
	arch/arm/boot/dts/imx28-sps1.dt.yaml
	arch/arm/boot/dts/imx28-ts4600.dt.yaml
	arch/arm/boot/dts/imx28-tx28.dt.yaml
	arch/arm/boot/dts/imx28-xea.dt.yaml

usb@e0002000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/zynq-cc108.dt.yaml
	arch/arm/boot/dts/zynq-ebaz4205.dt.yaml
	arch/arm/boot/dts/zynq-microzed.dt.yaml
	arch/arm/boot/dts/zynq-parallella.dt.yaml
	arch/arm/boot/dts/zynq-zc702.dt.yaml
	arch/arm/boot/dts/zynq-zc706.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm010.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm011.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm012.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm013.dt.yaml
	arch/arm/boot/dts/zynq-zed.dt.yaml
	arch/arm/boot/dts/zynq-zturn.dt.yaml
	arch/arm/boot/dts/zynq-zturn-v5.dt.yaml
	arch/arm/boot/dts/zynq-zybo.dt.yaml
	arch/arm/boot/dts/zynq-zybo-z7.dt.yaml

usb@e0003000: compatible: 'oneOf' conditional failed, one must be fixed:
	arch/arm/boot/dts/zynq-cc108.dt.yaml
	arch/arm/boot/dts/zynq-ebaz4205.dt.yaml
	arch/arm/boot/dts/zynq-microzed.dt.yaml
	arch/arm/boot/dts/zynq-parallella.dt.yaml
	arch/arm/boot/dts/zynq-zc702.dt.yaml
	arch/arm/boot/dts/zynq-zc706.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm010.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm011.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm012.dt.yaml
	arch/arm/boot/dts/zynq-zc770-xm013.dt.yaml
	arch/arm/boot/dts/zynq-zed.dt.yaml
	arch/arm/boot/dts/zynq-zturn.dt.yaml
	arch/arm/boot/dts/zynq-zturn-v5.dt.yaml
	arch/arm/boot/dts/zynq-zybo.dt.yaml
	arch/arm/boot/dts/zynq-zybo-z7.dt.yaml

usb@f9a55000: adp-disable: True is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: clock-names: ['iface', 'core'] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: clocks: [[23, 263], [23, 265]] is too long
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: clocks: Additional items are not allowed ([23, 265] was unexpected)
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: hnp-disable: True is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: phy-select: [[34, 45056, 0]] is not of type 'object'
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml

usb@f9a55000: phy-select: [[36, 45056, 1]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml

usb@f9a55000: phy-select: [[37, 45056, 0]] is not of type 'object'
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: phy-select: [[43, 45056, 0]] is not of type 'object'
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml

usb@f9a55000: phy-select: [[45, 45056, 0]] is not of type 'object'
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml

usb@f9a55000: reg: [[4188360704, 512], [4188361216, 512]] is too long
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: #reset-cells: [[1]] is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: reset-names:0: 'usb' was expected
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: srp-disable: True is not of type 'object'
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: ulpi: 'compatible' is a required property
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml

usb@f9a55000: ulpi: 'reg' is a required property
	arch/arm/boot/dts/qcom-apq8074-dragonboard.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-samsung-klte.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dt.yaml
	arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dt.yaml
Rob Herring (Arm) Dec. 15, 2021, 7:25 p.m. UTC | #2
On Thu, Dec 09, 2021 at 05:53:36PM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Convert the ChipIdea USB2 bindings from the free-form text format to
> json-schema.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  .../bindings/usb/chipidea,usb2.yaml           | 310 ++++++++++++++++++
>  .../devicetree/bindings/usb/ci-hdrc-usb2.txt  | 158 ---------
>  2 files changed, 310 insertions(+), 158 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
>  delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> 
> diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
> new file mode 100644
> index 000000000000..0e36259f23ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
> @@ -0,0 +1,310 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/chipidea,usb2.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: USB2 ChipIdea USB controller for ci13xxx
> +
> +maintainers:
> +  - Peter Chen <peter.chen@freescale.com>

This should have a reference to usb-drd.yaml I think.

> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,imx23-usb
> +          - fsl,imx27-usb
> +          - fsl,imx28-usb
> +          - fsl,imx6q-usb
> +          - fsl,imx6sl-usb
> +          - fsl,imx6sx-usb
> +          - fsl,imx6ul-usb
> +          - fsl,imx7d-usb
> +          - fsl,imx7ulp-usb
> +          - lsi,zevio-usb
> +          - qcom,ci-hdrc
> +          - chipidea,usb2
> +          - xlnx,zynq-usb-2.20a
> +          - nvidia,tegra20-udc
> +          - nvidia,tegra30-udc
> +          - nvidia,tegra114-udc
> +          - nvidia,tegra124-udc
> +      - items:
> +          - const: fsl,imx6q-usb
> +          - const: fsl,imx27-usb
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  phy_type:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: The type of the PHY connected to the core. Without this property the PORTSC
> +      register won't be touched.
> +    enum:
> +      - utmi
> +      - utmi_wide
> +      - ulpi
> +      - serial
> +      - hsic
> +
> +  dr_mode:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: dual-role mode of the interface
> +    enum:
> +      - host
> +      - peripheral
> +      - otg
> +    default:
> +      const: otg
> +
> +  clocks:
> +    items:
> +      - description: reference to the USB clock

From the report, i.MX needs 3 clocks.

> +
> +  resets:
> +    items:
> +      - description: reference to the USB reset
> +
> +  reset-names:
> +    items:
> +      - const: usb
> +
> +  phys:
> +    items:
> +      - description: reference to the USB PHY
> +
> +  phy-names:
> +    items:
> +      - const: usb-phy
> +
> +  vbus-supply:
> +    description: reference to the VBUS regulator
> +
> +  maximum-speed:
> +    description: limit the maximum connection speed to "full-speed".
> +
> +  tpl-support:
> +    description: TPL (Targeted Peripheral List) feature for targeted hosts
> +
> +  itc-setting:
> +    description: Interrupt threshold control register control, the setting should be aligned with
> +      ITC bits at register USBCMD.
> +
> +  ahb-burst-config:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: This vendor-dependent property is used to change the AHB burst configuration and
> +      should be aligned with AHBBRST at SBUSCFG. See the ChipIdea specification for the details on
> +      each of those values. If this property does not exist, the reset value will be used.
> +    minimum: 0
> +    maximum: 7
> +
> +  tx-burst-size-dword:
> +    description: This vendor-dependent property is used to configure the TX burst size (in 32-bit
> +      words). The value represents the maximum length of a burst while moving data from system
> +      memory to the USB bus. This property takes effect only if the "ahb-burst-config" property is
> +      set to 0. If this property is missing the reset default of the hardware implementation will
> +      be used.
> +
> +  rx-burst-size-dword:
> +    description: This vendor-dependent property is used to configure the RX burst size (in 32-bit
> +      words). This value represents the maximum length of a burst while moving data from the USB
> +      bus to system memory. This property takes effect only if the "ahb-burst-config" property is
> +      set to 0. If this property is missing the reset default of the hardware implementation will
> +      be used.
> +
> +  extcon:
> +    description: A list of phandles to external connector devices. The first phandle should point
> +      to the external connector which provides "USB" cable events. The second should point to the
> +      external connector device that provide "USB-HOST" cable events. If one of the external
> +      connector devices is not required, an empty phandle (0) should be specified.
> +
> +  phy-clkgate-delay-us:
> +    description: The delay time (in microseconds) between putting the PHY into low power mode and
> +      gating the PHY clock.
> +
> +  non-zero-ttctrl-ttha:
> +    description: |
> +      After setting this property, the value of register ttctrl.ttha will be 0x7f; if not, the
> +      value will be 0x0 (the default). The value for this property needs to be chosen very
> +      carefully after consulting with your IC engineer.
> +
> +      On most ChipIdea platforms, the "usage_tt" flag at RTL is 0, so this property only affects
> +      siTD.
> +
> +      If this property is not set, the maximum packet size is 1023 bytes, and if the total packet
> +      size for previous transactions is more than 256 bytes, no further transactions can be
> +      accepted within the frame. The use case is single transaction, but higher frame rate.
> +
> +      If this property is set, the maximum packet size is limited to 188 bytes and more
> +      transactions than in the above case can be handled. Transactions will be accepted as long as
> +      188 bytes or more of space are left within a frame. Software needs to make sure it does not
> +      send more than 90% maximum_periodic_data_per_frame. The use case is higher amount of
> +      transactions at the cost of a lower frame rate.
> +
> +  mux-controls:
> +    description: The mux control for toggling host/device output of this controller. It's expected
> +      that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode.
> +
> +  mux-control-names:
> +    const: usb_switch
> +
> +  pinctrl-names:
> +    description: In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this case,
> +      the "idle" state needs to pull down the data and strobe pin and the "active" state needs to
> +      pull up the strobe pin.
> +    minItems: 1
> +    maxItems: 5
> +    items:
> +      enum:
> +        - default
> +        - host
> +        - device
> +        - idle # mandatory for HSIC
> +        - active # mandatory for HSIC
> +
> +  # i.MX specific properties
> +  fsl,usbmisc:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: phandle to non-core register device, with one argument that indicate USB
> +      controller index.
> +
> +  disable-over-current:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: disable over current detect
> +
> +  over-current-active-low:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Over-current signal polarity is active low. It's recommended to specify the
> +      over-current polarity.
> +
> +  over-current-active-high:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Over-current signal polarity is active high. It's recommended to specify the
> +      over-current polarity.
> +
> +  power-active-high:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: power signal polarity is active high
> +
> +  external-vbus-divider:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: enables off-chip resistor divider for Vbus
> +
> +  samsung,picophy-pre-emp-curr-control:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: HS Transmitter Pre-Emphasis Current Control. This signal controls the amount of
> +      current sourced to the USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
> +      Refer to the TXPREEMPAMPTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for
> +      more details.
> +    minimum: 0
> +    maximum: 3
> +    default: 1
> +
> +  samsung,picophy-dc-vol-level-adjust:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC level
> +      voltage. Refer to the TXVREFTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for
> +      more details.
> +    minimum: 0
> +    maximum: 0xf
> +    default: 3
> +
> +  # NVIDIA Tegra specific properties
> +  nvidia,needs-double-reset:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description: Specifies a workaround for the USB1 port that needs to be reset twice internally
> +      some Tegra devices.
> +
> +  # deprecated properties
> +  usb-phy:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle for the PHY device. Use "phys" instead.
> +    deprecated: true
> +
> +  fsl,usbphy:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle of usb phy that connects to the port. Use "phys" instead.
> +    deprecated: true
> +
> +  nvidia,phy:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: phandle for the PHY device. Use "phys" instead.
> +    deprecated: true
> +

> +  # USB bus
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0

Covered by common schema (I think).

> +
> +patternProperties:
> +  "^pinctrl-[0-9]+$": true
> +
> +additionalProperties:
> +  $ref: usb-device.yaml

This is wrong as usb.device.yaml applies to child nodes.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +dependencies:
> +  mux-control-names: [ mux-controls ]
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/berlin2.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    usb@f7ed0000 {
> +      compatible = "chipidea,usb2";
> +      reg = <0xf7ed0000 0x10000>;
> +      interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&chip CLKID_USB0>;
> +      phys = <&usb_phy0>;
> +      phy-names = "usb-phy";
> +      vbus-supply = <&reg_usb0_vbus>;
> +      itc-setting = <0x4>; /* 4 micro-frames */
> +      /* Incremental burst of unspecified length */
> +      ahb-burst-config = <0x0>;
> +      tx-burst-size-dword = <0x10>; /* 64 bytes */
> +      rx-burst-size-dword = <0x10>;
> +      extcon = <0>, <&usb_id>;
> +      phy-clkgate-delay-us = <400>;
> +      mux-controls = <&usb_switch>;
> +      mux-control-names = "usb_switch";
> +    };
> +
> +  # HSIC
> +  - |
> +    #include <dt-bindings/clock/imx6qdl-clock.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    usb@2184400 {
> +      compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> +      reg = <0x02184400 0x200>;
> +      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&clks IMX6QDL_CLK_USBOH3>;
> +      fsl,usbphy = <&usbphynop1>;
> +      fsl,usbmisc = <&usbmisc 2>;
> +      phy_type = "hsic";
> +      dr_mode = "host";
> +      ahb-burst-config = <0x0>;
> +      tx-burst-size-dword = <0x10>;
> +      rx-burst-size-dword = <0x10>;
> +      pinctrl-names = "idle", "active";
> +      pinctrl-0 = <&pinctrl_usbh2_idle>;
> +      pinctrl-1 = <&pinctrl_usbh2_active>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      usbnet: smsc@1 {
> +        compatible = "usb424,9730";
> +        reg = <1>;
> +      };
> +    };
Thierry Reding Dec. 16, 2021, 4:12 p.m. UTC | #3
On Wed, Dec 15, 2021 at 01:25:08PM -0600, Rob Herring wrote:
> On Thu, Dec 09, 2021 at 05:53:36PM +0100, Thierry Reding wrote:
> > From: Thierry Reding <treding@nvidia.com>
> > 
> > Convert the ChipIdea USB2 bindings from the free-form text format to
> > json-schema.
> > 
> > Signed-off-by: Thierry Reding <treding@nvidia.com>
> > ---
> >  .../bindings/usb/chipidea,usb2.yaml           | 310 ++++++++++++++++++
> >  .../devicetree/bindings/usb/ci-hdrc-usb2.txt  | 158 ---------
> >  2 files changed, 310 insertions(+), 158 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
> > new file mode 100644
> > index 000000000000..0e36259f23ba
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
> > @@ -0,0 +1,310 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/usb/chipidea,usb2.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: USB2 ChipIdea USB controller for ci13xxx
> > +
> > +maintainers:
> > +  - Peter Chen <peter.chen@freescale.com>
> 
> This should have a reference to usb-drd.yaml I think.
> 
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - enum:
> > +          - fsl,imx23-usb
> > +          - fsl,imx27-usb
> > +          - fsl,imx28-usb
> > +          - fsl,imx6q-usb
> > +          - fsl,imx6sl-usb
> > +          - fsl,imx6sx-usb
> > +          - fsl,imx6ul-usb
> > +          - fsl,imx7d-usb
> > +          - fsl,imx7ulp-usb
> > +          - lsi,zevio-usb
> > +          - qcom,ci-hdrc
> > +          - chipidea,usb2
> > +          - xlnx,zynq-usb-2.20a
> > +          - nvidia,tegra20-udc
> > +          - nvidia,tegra30-udc
> > +          - nvidia,tegra114-udc
> > +          - nvidia,tegra124-udc
> > +      - items:
> > +          - const: fsl,imx6q-usb
> > +          - const: fsl,imx27-usb
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  phy_type:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: The type of the PHY connected to the core. Without this property the PORTSC
> > +      register won't be touched.
> > +    enum:
> > +      - utmi
> > +      - utmi_wide
> > +      - ulpi
> > +      - serial
> > +      - hsic
> > +
> > +  dr_mode:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description: dual-role mode of the interface
> > +    enum:
> > +      - host
> > +      - peripheral
> > +      - otg
> > +    default:
> > +      const: otg
> > +
> > +  clocks:
> > +    items:
> > +      - description: reference to the USB clock
> 
> From the report, i.MX needs 3 clocks.

Okay, I'll look into that.

> > +  # USB bus
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> 
> Covered by common schema (I think).

Yeah, so this can be both used in peripheral mode and host mode, so it
probably needs usb-hcd.yaml and usb-drd.yaml, and then #address-cells
and #size-cells will get pulled in.

> 
> > +
> > +patternProperties:
> > +  "^pinctrl-[0-9]+$": true
> > +
> > +additionalProperties:
> > +  $ref: usb-device.yaml
> 
> This is wrong as usb.device.yaml applies to child nodes.

Originally the idea behind this was that any additionalProperties would
have to be child nodes that represent hard-wired USB devices. Given the
above and that I'm now including usb-hcd.yaml here, this is taken care
of automatically.

Thierry
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
new file mode 100644
index 000000000000..0e36259f23ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml
@@ -0,0 +1,310 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/chipidea,usb2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: USB2 ChipIdea USB controller for ci13xxx
+
+maintainers:
+  - Peter Chen <peter.chen@freescale.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx23-usb
+          - fsl,imx27-usb
+          - fsl,imx28-usb
+          - fsl,imx6q-usb
+          - fsl,imx6sl-usb
+          - fsl,imx6sx-usb
+          - fsl,imx6ul-usb
+          - fsl,imx7d-usb
+          - fsl,imx7ulp-usb
+          - lsi,zevio-usb
+          - qcom,ci-hdrc
+          - chipidea,usb2
+          - xlnx,zynq-usb-2.20a
+          - nvidia,tegra20-udc
+          - nvidia,tegra30-udc
+          - nvidia,tegra114-udc
+          - nvidia,tegra124-udc
+      - items:
+          - const: fsl,imx6q-usb
+          - const: fsl,imx27-usb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The type of the PHY connected to the core. Without this property the PORTSC
+      register won't be touched.
+    enum:
+      - utmi
+      - utmi_wide
+      - ulpi
+      - serial
+      - hsic
+
+  dr_mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: dual-role mode of the interface
+    enum:
+      - host
+      - peripheral
+      - otg
+    default:
+      const: otg
+
+  clocks:
+    items:
+      - description: reference to the USB clock
+
+  resets:
+    items:
+      - description: reference to the USB reset
+
+  reset-names:
+    items:
+      - const: usb
+
+  phys:
+    items:
+      - description: reference to the USB PHY
+
+  phy-names:
+    items:
+      - const: usb-phy
+
+  vbus-supply:
+    description: reference to the VBUS regulator
+
+  maximum-speed:
+    description: limit the maximum connection speed to "full-speed".
+
+  tpl-support:
+    description: TPL (Targeted Peripheral List) feature for targeted hosts
+
+  itc-setting:
+    description: Interrupt threshold control register control, the setting should be aligned with
+      ITC bits at register USBCMD.
+
+  ahb-burst-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This vendor-dependent property is used to change the AHB burst configuration and
+      should be aligned with AHBBRST at SBUSCFG. See the ChipIdea specification for the details on
+      each of those values. If this property does not exist, the reset value will be used.
+    minimum: 0
+    maximum: 7
+
+  tx-burst-size-dword:
+    description: This vendor-dependent property is used to configure the TX burst size (in 32-bit
+      words). The value represents the maximum length of a burst while moving data from system
+      memory to the USB bus. This property takes effect only if the "ahb-burst-config" property is
+      set to 0. If this property is missing the reset default of the hardware implementation will
+      be used.
+
+  rx-burst-size-dword:
+    description: This vendor-dependent property is used to configure the RX burst size (in 32-bit
+      words). This value represents the maximum length of a burst while moving data from the USB
+      bus to system memory. This property takes effect only if the "ahb-burst-config" property is
+      set to 0. If this property is missing the reset default of the hardware implementation will
+      be used.
+
+  extcon:
+    description: A list of phandles to external connector devices. The first phandle should point
+      to the external connector which provides "USB" cable events. The second should point to the
+      external connector device that provide "USB-HOST" cable events. If one of the external
+      connector devices is not required, an empty phandle (0) should be specified.
+
+  phy-clkgate-delay-us:
+    description: The delay time (in microseconds) between putting the PHY into low power mode and
+      gating the PHY clock.
+
+  non-zero-ttctrl-ttha:
+    description: |
+      After setting this property, the value of register ttctrl.ttha will be 0x7f; if not, the
+      value will be 0x0 (the default). The value for this property needs to be chosen very
+      carefully after consulting with your IC engineer.
+
+      On most ChipIdea platforms, the "usage_tt" flag at RTL is 0, so this property only affects
+      siTD.
+
+      If this property is not set, the maximum packet size is 1023 bytes, and if the total packet
+      size for previous transactions is more than 256 bytes, no further transactions can be
+      accepted within the frame. The use case is single transaction, but higher frame rate.
+
+      If this property is set, the maximum packet size is limited to 188 bytes and more
+      transactions than in the above case can be handled. Transactions will be accepted as long as
+      188 bytes or more of space are left within a frame. Software needs to make sure it does not
+      send more than 90% maximum_periodic_data_per_frame. The use case is higher amount of
+      transactions at the cost of a lower frame rate.
+
+  mux-controls:
+    description: The mux control for toggling host/device output of this controller. It's expected
+      that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode.
+
+  mux-control-names:
+    const: usb_switch
+
+  pinctrl-names:
+    description: In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this case,
+      the "idle" state needs to pull down the data and strobe pin and the "active" state needs to
+      pull up the strobe pin.
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - default
+        - host
+        - device
+        - idle # mandatory for HSIC
+        - active # mandatory for HSIC
+
+  # i.MX specific properties
+  fsl,usbmisc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandle to non-core register device, with one argument that indicate USB
+      controller index.
+
+  disable-over-current:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: disable over current detect
+
+  over-current-active-low:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Over-current signal polarity is active low. It's recommended to specify the
+      over-current polarity.
+
+  over-current-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Over-current signal polarity is active high. It's recommended to specify the
+      over-current polarity.
+
+  power-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: power signal polarity is active high
+
+  external-vbus-divider:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enables off-chip resistor divider for Vbus
+
+  samsung,picophy-pre-emp-curr-control:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: HS Transmitter Pre-Emphasis Current Control. This signal controls the amount of
+      current sourced to the USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
+      Refer to the TXPREEMPAMPTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for
+      more details.
+    minimum: 0
+    maximum: 3
+    default: 1
+
+  samsung,picophy-dc-vol-level-adjust:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC level
+      voltage. Refer to the TXVREFTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for
+      more details.
+    minimum: 0
+    maximum: 0xf
+    default: 3
+
+  # NVIDIA Tegra specific properties
+  nvidia,needs-double-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Specifies a workaround for the USB1 port that needs to be reset twice internally
+      some Tegra devices.
+
+  # deprecated properties
+  usb-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle for the PHY device. Use "phys" instead.
+    deprecated: true
+
+  fsl,usbphy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle of usb phy that connects to the port. Use "phys" instead.
+    deprecated: true
+
+  nvidia,phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle for the PHY device. Use "phys" instead.
+    deprecated: true
+
+  # USB bus
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^pinctrl-[0-9]+$": true
+
+additionalProperties:
+  $ref: usb-device.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+dependencies:
+  mux-control-names: [ mux-controls ]
+
+examples:
+  - |
+    #include <dt-bindings/clock/berlin2.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@f7ed0000 {
+      compatible = "chipidea,usb2";
+      reg = <0xf7ed0000 0x10000>;
+      interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&chip CLKID_USB0>;
+      phys = <&usb_phy0>;
+      phy-names = "usb-phy";
+      vbus-supply = <&reg_usb0_vbus>;
+      itc-setting = <0x4>; /* 4 micro-frames */
+      /* Incremental burst of unspecified length */
+      ahb-burst-config = <0x0>;
+      tx-burst-size-dword = <0x10>; /* 64 bytes */
+      rx-burst-size-dword = <0x10>;
+      extcon = <0>, <&usb_id>;
+      phy-clkgate-delay-us = <400>;
+      mux-controls = <&usb_switch>;
+      mux-control-names = "usb_switch";
+    };
+
+  # HSIC
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@2184400 {
+      compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+      reg = <0x02184400 0x200>;
+      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clks IMX6QDL_CLK_USBOH3>;
+      fsl,usbphy = <&usbphynop1>;
+      fsl,usbmisc = <&usbmisc 2>;
+      phy_type = "hsic";
+      dr_mode = "host";
+      ahb-burst-config = <0x0>;
+      tx-burst-size-dword = <0x10>;
+      rx-burst-size-dword = <0x10>;
+      pinctrl-names = "idle", "active";
+      pinctrl-0 = <&pinctrl_usbh2_idle>;
+      pinctrl-1 = <&pinctrl_usbh2_active>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usbnet: smsc@1 {
+        compatible = "usb424,9730";
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
deleted file mode 100644
index a5c5db6a0b2d..000000000000
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ /dev/null
@@ -1,158 +0,0 @@ 
-* USB2 ChipIdea USB controller for ci13xxx
-
-Required properties:
-- compatible: should be one of:
-	"fsl,imx23-usb"
-	"fsl,imx27-usb"
-	"fsl,imx28-usb"
-	"fsl,imx6q-usb"
-	"fsl,imx6sl-usb"
-	"fsl,imx6sx-usb"
-	"fsl,imx6ul-usb"
-	"fsl,imx7d-usb"
-	"fsl,imx7ulp-usb"
-	"lsi,zevio-usb"
-	"qcom,ci-hdrc"
-	"chipidea,usb2"
-	"xlnx,zynq-usb-2.20a"
-	"nvidia,tegra20-udc"
-	"nvidia,tegra30-udc"
-	"nvidia,tegra114-udc"
-	"nvidia,tegra124-udc"
-- reg: base address and length of the registers
-- interrupts: interrupt for the USB controller
-
-Recommended properies:
-- phy_type: the type of the phy connected to the core. Should be one
-  of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
-  property the PORTSC register won't be touched.
-- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
-
-Deprecated properties:
-- usb-phy:      phandle for the PHY device. Use "phys" instead.
-- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead.
-
-Optional properties:
-- clocks: reference to the USB clock
-- phys: reference to the USB PHY
-- phy-names: should be "usb-phy"
-- vbus-supply: reference to the VBUS regulator
-- maximum-speed: limit the maximum connection speed to "full-speed".
-- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-- itc-setting: interrupt threshold control register control, the setting
-  should be aligned with ITC bits at register USBCMD.
-- ahb-burst-config: it is vendor dependent, the required value should be
-  aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This
-  property is used to change AHB burst configuration, check the chipidea
-  spec for meaning of each value. If this property is not existed, it
-  will use the reset value.
-- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
-  (4 bytes), This register represents the maximum length of a the burst
-  in 32-bit words while moving data from system memory to the USB
-  bus, the value of this property will only take effect if property
-  "ahb-burst-config" is set to 0, if this property is missing the reset
-  default of the hardware implementation will be used.
-- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
-  (4 bytes), This register represents the maximum length of a the burst
-  in 32-bit words while moving data from the USB bus to system memory,
-  the value of this property will only take effect if property
-  "ahb-burst-config" is set to 0, if this property is missing the reset
-  default of the hardware implementation will be used.
-- extcon: phandles to external connector devices. First phandle should point to
-  external connector, which provide "USB" cable events, the second should point
-  to external connector device, which provide "USB-HOST" cable events. If one
-  of the external connector devices is not required, empty <0> phandle should
-  be specified.
-- phy-clkgate-delay-us: the delay time (us) between putting the PHY into
-  low power mode and gating the PHY clock.
-- non-zero-ttctrl-ttha: after setting this property, the value of register
-  ttctrl.ttha will be 0x7f; if not, the value will be 0x0, this is the default
-  value. It needs to be very carefully for setting this property, it is
-  recommended that consult with your IC engineer before setting this value.
-  On the most of chipidea platforms, the "usage_tt" flag at RTL is 0, so this
-  property only affects siTD.
-  If this property is not set, the max packet size is 1023 bytes, and if
-  the total of packet size for pervious transactions are more than 256 bytes,
-  it can't accept any transactions within this frame. The use case is single
-  transaction, but higher frame rate.
-  If this property is set, the max packet size is 188 bytes, it can handle
-  more transactions than above case, it can accept transactions until it
-  considers the left room size within frame is less than 188 bytes, software
-  needs to make sure it does not send more than 90%
-  maximum_periodic_data_per_frame. The use case is multiple transactions, but
-  less frame rate.
-- mux-controls: The mux control for toggling host/device output of this
-  controller. It's expected that a mux state of 0 indicates device mode and a
-  mux state of 1 indicates host mode.
-- mux-control-names: Shall be "usb_switch" if mux-controls is specified.
-- pinctrl-names: Names for optional pin modes in "default", "host", "device".
-  In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this
-  case, the "idle" state needs to pull down the data and strobe pin
-  and the "active" state needs to pull up the strobe pin.
-- pinctrl-n: alternate pin modes
-
-i.mx specific properties
-- fsl,usbmisc: phandler of non-core register device, with one
-  argument that indicate usb controller index
-- disable-over-current: disable over current detect
-- over-current-active-low: over current signal polarity is active low.
-- over-current-active-high: over current signal polarity is active high.
-  It's recommended to specify the over current polarity.
-- power-active-high: power signal polarity is active high
-- external-vbus-divider: enables off-chip resistor divider for Vbus
-- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current
-  Control. This signal controls the amount of current sourced to the
-  USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition.
-  The range is from 0x0 to 0x3, the default value is 0x1.
-  Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1.
-- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment.
-  Adjust the high-speed transmitter DC level voltage.
-  The range is from 0x0 to 0xf, the default value is 0x3.
-  Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
-
-Example:
-
-	usb@f7ed0000 {
-		compatible = "chipidea,usb2";
-		reg = <0xf7ed0000 0x10000>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&chip CLKID_USB0>;
-		phys = <&usb_phy0>;
-		phy-names = "usb-phy";
-		vbus-supply = <&reg_usb0_vbus>;
-		itc-setting = <0x4>; /* 4 micro-frames */
-		 /* Incremental burst of unspecified length */
-		ahb-burst-config = <0x0>;
-		tx-burst-size-dword = <0x10>; /* 64 bytes */
-		rx-burst-size-dword = <0x10>;
-		extcon = <0>, <&usb_id>;
-		phy-clkgate-delay-us = <400>;
-		mux-controls = <&usb_switch>;
-		mux-control-names = "usb_switch";
-	};
-
-Example for HSIC:
-
-	usb@2184400 {
-		compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
-		reg = <0x02184400 0x200>;
-		interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6QDL_CLK_USBOH3>;
-		fsl,usbphy = <&usbphynop1>;
-		fsl,usbmisc = <&usbmisc 2>;
-		phy_type = "hsic";
-		dr_mode = "host";
-		ahb-burst-config = <0x0>;
-		tx-burst-size-dword = <0x10>;
-		rx-burst-size-dword = <0x10>;
-		pinctrl-names = "idle", "active";
-		pinctrl-0 = <&pinctrl_usbh2_idle>;
-		pinctrl-1 = <&pinctrl_usbh2_active>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbnet: smsc@1 {
-			compatible = "usb424,9730";
-			reg = <1>;
-		};
-	};