@@ -273,6 +273,8 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
gpd->dw3_info |= cpu_to_le32(GPD_EXT_FLAG_ZLP);
}
+ /* prevent reorder, make sure GPD's HWO is set last */
+ mb();
gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO);
mreq->gpd = gpd;
@@ -306,6 +308,8 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
ext_addr |= GPD_EXT_NGP(mtu, upper_32_bits(enq_dma));
gpd->dw3_info = cpu_to_le32(ext_addr);
+ /* prevent reorder, make sure GPD's HWO is set last */
+ mb();
gpd->dw0_info |= cpu_to_le32(GPD_FLAGS_IOC | GPD_FLAGS_HWO);
mreq->gpd = gpd;
@@ -445,7 +449,8 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
return;
}
mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_TXPKTRDY);
-
+ /* prevent reorder, make sure GPD's HWO is set last */
+ mb();
/* by pass the current GDP */
gpd_current->dw0_info |= cpu_to_le32(GPD_FLAGS_BPS | GPD_FLAGS_HWO);
There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: stable@vger.kernel.org Reported-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: modify misleading comment and commit message --- drivers/usb/mtu3/mtu3_qmu.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)