@@ -4974,7 +4974,18 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
hsotg->params.g_np_tx_fifo_size);
dev_dbg(dev, "RXFIFO size: %d\n", hsotg->params.g_rx_fifo_size);
- hsotg->gadget.max_speed = USB_SPEED_HIGH;
+ switch (hsotg->params.speed) {
+ case DWC2_SPEED_PARAM_LOW:
+ hsotg->gadget.max_speed = USB_SPEED_LOW;
+ break;
+ case DWC2_SPEED_PARAM_FULL:
+ hsotg->gadget.max_speed = USB_SPEED_FULL;
+ break;
+ default:
+ hsotg->gadget.max_speed = USB_SPEED_HIGH;
+ break;
+ }
+
hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
hsotg->gadget.name = dev_name(dev);
hsotg->gadget.otg_caps = &hsotg->params.otg_caps;
DWC2 may be paired with a full-speed PHY which is not capable of high-speed operation. Report this correctly to the gadget core by setting max_speed from the core parameters. Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") this didn't cause the hardware to be configured incorrectly, although the speed may have been reported incorrectly. But after that commit params.speed is updated based on a value passed in by the gadget core which may set it to a faster speed than is supported by the hardware. Initialising the max_speed parameter ensures the speed passed to dwc2_gadget_set_speed() will be one supported by the hardware. Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: John Keeping <john@metanate.com> --- v2: - Add Minas' ack --- drivers/usb/dwc2/gadget.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)