diff mbox series

[v2,1/5] usb: dwc3: xilinx: Fix PIPE clock selection for USB2.0 mode

Message ID 20220110193641.1368350-2-robert.hancock@calian.com (mailing list archive)
State Superseded
Headers show
Series Xilinx ZynqMP USB fixes | expand

Commit Message

Robert Hancock Jan. 10, 2022, 7:36 p.m. UTC 
It appears that the PIPE clock should not be selected when only USB 2.0
is being used in the design and no USB 3.0 reference clock is used. Fix
to set the correct value depending on whether a USB3 PHY is present.

Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 drivers/usb/dwc3/dwc3-xilinx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 9cc3ad701a29..3bc035376394 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -167,8 +167,11 @@  static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	/* Set PIPE Power Present signal in FPD Power Present Register*/
 	writel(FPD_POWER_PRSNT_OPTION, priv_data->regs + XLNX_USB_FPD_POWER_PRSNT);
 
-	/* Set the PIPE Clock Select bit in FPD PIPE Clock register */
-	writel(PIPE_CLK_SELECT, priv_data->regs + XLNX_USB_FPD_PIPE_CLK);
+	/* Set the PIPE Clock Select bit in FPD PIPE Clock register if a USB3
+	 * PHY is in use, deselect otherwise
+	 */
+	writel(usb3_phy ? PIPE_CLK_SELECT : PIPE_CLK_DESELECT,
+	       priv_data->regs + XLNX_USB_FPD_PIPE_CLK);
 
 	ret = reset_control_deassert(crst);
 	if (ret < 0) {