diff mbox series

[v3,2/4] dt-bindings: usb: dwc3-imx8mp: Add imx8mp specific flags

Message ID 20220118131626.926394-3-alexander.stein@ew.tq-group.com (mailing list archive)
State Superseded
Headers show
Series i.MX8MP: more USB3 glue layer feature support | expand

Commit Message

Alexander Stein Jan. 18, 2022, 1:16 p.m. UTC
This adds bindings for features in the USB glue block. They allow
setting polarity of PWR and OC as well as disabling port power control.
Also permanently attached can be annotated as well.
Additional IO address and clock are needed.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 .../bindings/usb/fsl,imx8mp-dwc3.yaml         | 38 ++++++++++++++++---
 1 file changed, 32 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 974032b1fda0..ff48b4e8427d 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -15,9 +15,9 @@  properties:
     const: fsl,imx8mp-dwc3
 
   reg:
-    maxItems: 1
-    description: Address and length of the register set for the wrapper of
-      dwc3 core on the SOC.
+    items:
+      - description: Address and length of the register set for HSIO Block Control
+      - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -43,11 +43,35 @@  properties:
     items:
       - description: system hsio root clock.
       - description: suspend clock, used for usb wakeup logic.
+      - description: clock for the USB glue block
 
   clock-names:
     items:
       - const: hsio
       - const: suspend
+      - const: phy
+
+  fsl,permanently-attached:
+    type: boolean
+    description:
+      Indicates if the device atached to a downstream port is
+      permanently attached.
+
+  fsl,disable-port-power-control:
+    type: boolean
+    description:
+      Indicates whether the host controller implementation includes port
+      power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+  fsl,over-current-active-low:
+    type: boolean
+    description:
+      Over current signal polarity is active low.
+
+  fsl,power-active-low:
+    type: boolean
+    description:
+      Power pad (PWR) polarity is active low.
 
 # Required child node:
 
@@ -74,10 +98,12 @@  examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     usb3_0: usb@32f10100 {
       compatible = "fsl,imx8mp-dwc3";
-      reg = <0x32f10100 0x8>;
+      reg = <0x32f10100 0x8>,
+            <0x381f0000 0x20>;
       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-               <&clk IMX8MP_CLK_USB_ROOT>;
-      clock-names = "hsio", "suspend";
+               <&clk IMX8MP_CLK_USB_ROOT>,
+               <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+      clock-names = "hsio", "suspend", "phy";
       interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
       #address-cells = <1>;
       #size-cells = <1>;