diff mbox series

[v4] usb: dwc3: Issue core soft reset before enabling run/stop

Message ID 20220316011358.3057-1-quic_wcheng@quicinc.com (mailing list archive)
State Accepted
Commit 0066472de157439d58454f4a55786f1045ea5681
Headers show
Series [v4] usb: dwc3: Issue core soft reset before enabling run/stop | expand

Commit Message

Wesley Cheng March 16, 2022, 1:13 a.m. UTC
It is recommended by the Synopsis databook to issue a DCTL.CSftReset
when reconnecting from a device-initiated disconnect routine.  This
resolves issues with enumeration during fast composition switching
cases, which result in an unknown device on the host.

Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 Changes in v4:
   - Fixed some typos in the comments explaining the core soft reset.

 Changes in v3:
   - Removed change from RFC series and placed into its own patch.

 Previous patches:
  https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/20220203080017.27339-1-quic_wcheng@quicinc.com/__;!!A4F2R9G_pg!OjNviLgYSUvXpUWpeTDiI6OVuwjW2kjQpACAYYo5MdI09GClnUHLGFjuoMrtquF8Qe9X$ 

 drivers/usb/dwc3/core.c   |  4 +---
 drivers/usb/dwc3/core.h   |  2 ++
 drivers/usb/dwc3/gadget.c | 11 +++++++++++
 3 files changed, 14 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 18adddfba3da..02d10e1cb774 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -115,8 +115,6 @@  void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	dwc->current_dr_role = mode;
 }
 
-static int dwc3_core_soft_reset(struct dwc3 *dwc);
-
 static void __dwc3_set_mode(struct work_struct *work)
 {
 	struct dwc3 *dwc = work_to_dwc(work);
@@ -261,7 +259,7 @@  u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type)
  * dwc3_core_soft_reset - Issues core soft reset and PHY reset
  * @dwc: pointer to our context structure
  */
-static int dwc3_core_soft_reset(struct dwc3 *dwc)
+int dwc3_core_soft_reset(struct dwc3 *dwc)
 {
 	u32		reg;
 	int		retries = 1000;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index eb9c1efced05..86e27afef6c5 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1530,6 +1530,8 @@  bool dwc3_has_imod(struct dwc3 *dwc);
 int dwc3_event_buffers_setup(struct dwc3 *dwc);
 void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
 
+int dwc3_core_soft_reset(struct dwc3 *dwc);
+
 #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
 int dwc3_host_init(struct dwc3 *dwc);
 void dwc3_host_exit(struct dwc3 *dwc);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a0c883f19a41..4ad65154a25f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2544,6 +2544,17 @@  static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 						dwc->ev_buf->length;
 		}
 	} else {
+		/*
+		 * In the Synopsys DWC_usb31 1.90a programming guide section
+		 * 4.1.9, it specifies that for a reconnect after a
+		 * device-initiated disconnect requires a core soft reset
+		 * (DCTL.CSftRst) before enabling the run/stop bit.
+		 */
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		dwc3_core_soft_reset(dwc);
+		spin_lock_irqsave(&dwc->lock, flags);
+
+		dwc3_event_buffers_setup(dwc);
 		__dwc3_gadget_start(dwc);
 	}