| Message ID | 20220601040531.6016-1-slark_xiao@163.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 9f4fc18bf285f20c1498f8fcfb586fa70a070fb5 |
| Headers | show |
| Series | net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline | expand |
Slark Xiao <slark_xiao@163.com> writes: > Adding support for Cinterion device MV31 with Qualcomm > new baseline. Use different PIDs to separate it from > previous base line products. > All interfaces settings keep same as previous. > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1e2d ProdID=00b9 Rev=04.14 > S: Manufacturer=Cinterion > S: Product=Cinterion PID 0x00B9 USB Mobile Broadband > S: SerialNumber=90418e79 > C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > > Signed-off-by: Slark Xiao <slark_xiao@163.com> Thanks Acked-by: Bjørn Mork <bjorn@mork.no>
Hello: This patch was applied to netdev/net.git (master) by Jakub Kicinski <kuba@kernel.org>: On Wed, 1 Jun 2022 12:05:31 +0800 you wrote: > Adding support for Cinterion device MV31 with Qualcomm > new baseline. Use different PIDs to separate it from > previous base line products. > All interfaces settings keep same as previous. > > T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1e2d ProdID=00b9 Rev=04.14 > S: Manufacturer=Cinterion > S: Product=Cinterion PID 0x00B9 USB Mobile Broadband > S: SerialNumber=90418e79 > C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > > [...] Here is the summary with links: - net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline https://git.kernel.org/netdev/net/c/9f4fc18bf285 You are awesome, thank you!
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index a659d6fb0b12..571a399c195d 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1389,6 +1389,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/ {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */ {QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)}, /* Cinterion MV31 RmNet */ + {QMI_FIXED_INTF(0x1e2d, 0x00b9, 0)}, /* Cinterion MV31 RmNet based on new baseline */ {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
Adding support for Cinterion device MV31 with Qualcomm new baseline. Use different PIDs to separate it from previous base line products. All interfaces settings keep same as previous. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b9 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B9 USB Mobile Broadband S: SerialNumber=90418e79 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)